基于灵敏度分析的某农用车车架的动力修改

首先探讨了基于动力特性灵敏度分析的动力修改技术。建立了某农用车车架的参数化有限元模型,并对车架进行灵敏度分析,在分析结果的指导下,进行了车架的动力修改,取得了良好的效果,为农用车改型设计及推出新产品提供了思路和设计依据,为在工程实践中应用结构动力修改和结构优化设计理论作了有益的尝试。

发动机管路卡箍位置动力灵敏度分析与优化设计

发动机的管路卡箍布置具有随意性和经验性的问题,把卡箍的支撑当作末端固定的平移约束单元,随机变亮是定义对任意两个卡箍间的管道长度。采用有限元法结合离散抽样的方法,对结构参数和复杂管路系统基频和随机振动的灵敏度进行分析,结果发现卡箍的间距变化更加大了。本文对卡箍数量及刚度对管路系统的动力学特性的影响规律进行了探究,使基频和外界的激振频率的数值最大化。

矿用自卸车驾驶室支承参数的动力优化设计

本文提出单点激励多级随机隔振系统的动力敏度分析方法,并用该方法,对国产某重型矿用自卸车的驾驶室和座椅支承系统的物理参数进行了动力优化设计。目标函数是座椅的垂直加速度均方值,还给出一个动力约束条件。计算表明,座椅支承的阻尼值是降低目标函数最敏感的参数。

结构动力优化设计述评与展望

结构动力优化设计是当前工程结构设计研究领域中的前沿性课题．文中着重从结构动力特性优化、结构动力响应优化、结构动力灵敏度分析和基于可靠性的结构动力优化设计等四个专题方面对结构动力优化设计研究的发展与现状进行了述评，并粗略地展望了结构动力优化研究未来的发展趋势．

具有频率和振型概率约束的工程结构动力优化设计

对随机参数结构建立了具有频率、频率禁区和振型位置概率约束的结构动力优化设计数学模型 ;利用一次二阶矩法对概率约束进行了等价化处理 ;推导了频率、振型节点位置和可靠性指标对设计变量的灵敏度表达式 ;利用子空间迭代法和混合罚函数法求解。

DYNAMIC RESPONSE OPTIMIZATION DESIGN FOR ENGINEERING STRUCTURES BASED ON RELIABILITY

In many practical structures, physical parameters of material and applied loads have random property.To optimize this kind of structures,an optimum mathematical model was built.This model has reliability constraints on dynamic stress and displacement and upper & lower limits of the design variables. The numerical characteristic of dynamic response and sensitivity of dynamic response based on probability of structure were deduced respectively. By equivalent disposing, the reliability constraints were changed into conventional forms. The SUMT method was used in the optimization process.Two examples illustrate the correctness and practicability of the optimum model and solving approach.

Novel sensitivity analysis method and dynamics optimization for multiple launch rocket systems

This study establishes the launch dynamics method,sensitivity analysis method,and multiobjective dynamic optimization method for the dynamic simulation analysis of the multiple launch rocket system(MLRS)based on the Riccati transfer matrix method for multibody systems(RMSTMM),direct differentiation method(DDM),and genetic algorithm(GA),respectively.Results show that simulation results of the dynamic response agree well with test results.The sensitivity analysis method is highly programming,the matrix order is low,and the calculation time is much shorter than that of the Lagrange method.With the increase of system complexity,the advantage of a high computing speed becomes more evident.Structural parameters that have the greatest influence on the dynamic response include the connection stiffness between the pitching body and the rotating body,the connection stiffness between the rotating body and the vehicle body,and the connection stiffnesses among 14^(#),16^(#),and 17^(#)wheels and the ground,which are the optimization design variables.After optimization,angular velocity variances of the pitching body in the revolving and pitching directions are reduced by 97.84%and 95.22%,respectively.

Functional design of wind turbine airfoils based on roughness sensitivity characteristics

To improve aerodynamic performance of wind turbine airfoils,the shape profile characteristic of the airfoil is investigated.Application of conformal transformation,one functional and integrated expression of wind turbine airfoils is presented.Using the boundary layer theory,the aerodynamic model with roughness of wind turbine airfoils is introduced by studying flow separation around the airfoil.Based on the shape expression and aerodynamic performance of airfoils,the function design of wind turbine airfoils is carried out that the maximum lift-drag ratio and low roughness sensitivity are designed objects.Three wind turbines airfoils with different thickness are gained which are used at tip part of blades.As an example,the aerodynamic performance of one designed airfoil with relative thickness of 15%is simulated in different conditions of clean surface,rough surface,laminar flow and turbulent flow.The comparison of aerodynamic performance between the designed airfoil and one popular NACA airfoil is completed which can verify the better performance of the designed airfoil and reliability of the designed method.

A Reduced Mechanism for Flame Inhibition by Phosphorus-containing Compounds Based on Level of Importance Analysis

A reduced mechanism for propane/air combustion and its flame inhibition by phosphorus-containing compounds (PCCs) is constructed with the level of importance (LOI) method. The analysis is performed on solutions of freely propagating premixed flames with detailed chemical kinetics involving 121 species and 682 reactions proposed by Jayaweera et al. For the non-homogeneous reaction-diffusion system, the chemical lifetime of each species is weighted by its diffusion timescale, and the characteristic flame timescale is used to normalize the chemical lifetime. The definition of sensitivity in LOI is extended so that multi-parameters can be used as sensitivity targets. Propane, oxygen, dimethyl methylphosphonate (DMMP), and flame speed are selected to be perturbed for sensitivity analysis, the species with low LOI index are removed, and reactions involving the redundant species are excluded from the mechanism. A skeletal mechanism is obtained, which consists of 57 species and 268 elementary reactions. Calculations for laminar flame speeds, key flame radicals and catalytic cycles using the skeletal mechanism are in good agreement with those by using the detailed mechanism over a wide range of equivalence ratio undoped and doped with DMMP.

Relationship between breakthrough curve and adsorption isotherm of Ca(Ⅱ)imprinted chitosan microspheres for metal adsorption

In this work, an equilibrium-dispersion model was successfully established to describe the breakthrough performance of Ca（Ⅱ） imprinted chitosan （Ca（Ⅱ）-CS） microspheres packed column for metal adsorption, and the assumptions of Langmuir isotherms and axial dispersion controlled mass transfer process were confirmed. The axial dispersion coefficient in Ca（Ⅱ）-CS microspheres packed column was found to be almost proportional to the linear velocity and fit for prediction through single breakthrough test. Sensitivity analysis for breakthrough curve indicated the axial dispersion coefficient as well as Langmuir coefficient was sensitive variable for deep removal requirement. The retrieval of the adsorption isotherms of Ca（Ⅱ）-CS microspheres from breakthrough curve was fulfilled by modelling calibration. A strategy based on the correlation between adsorption isotherms and breakthrough performance was further proposed to simplify the column adsorption design using absorbents with small/uniform size and fast adsorption kinetics like Ca（Ⅱ）-CS microspheres to cut down the gap between lab and industry.

A new method to calculate the productivity index for vertical fractured well of tight gas reservoir

Generally the irreducible water saturation of low permeability gas reservoir is quite high which leads to the permeability stress sensibility and threshold pressure gradient. Under the assumption that permeability varies with experimental law of the pseudo pressure drop, according to concepts of perturbable ellipses and equivalent developing regulations, the calculation method of stable production of hydraulically fractured gas well in low permeability reservoirs is investigated with threshold pressure. And productivity curve is drawn and analyzed. The result shows that, permeability modulus and threshold pressure have effect on production of fractured gas well. The higher the permeability modulus and the threshold pressure, the lower the production is. Therefore, the impact of stress sensitive and threshold pressure must he considered when analyzing the productivity of vertical fracture well in low permeability gas reservoir.

An Overview of the Advanced Nonintrusive Measurement Techniques in Hypersonic Flow Field

Hypersonic flow-field measurement techniques have been studied for about 50 years. Despite truly remarkable progress with a probe or other device to measure the temperature, pressure or velocity, there are still serious problems for these "intrusive" techniques. The intrusive measurement techniques introduce unexpected shock waves or flow-field structures, even make the boundary layer transition earlier and show a converse result. In recent years, nonintrusive diagnostics have been in urgent demand to give a more accurate and comprehensive flow-field for hypersonic testing. In this paper, an overview of some advanced nonintrusive measurement techniques such as embedded thermocouples for heat flux measurement, Pressure Sensitive Paint(PSP), Particle Image Velocimetry(PIV), infrared thermographs, and focusing Schlieren system are introduced. All of these techniques are nonintrusive and provide measurement of various parameters such as temperature, static pressure, dynamic pressure, flow velocity and visualization of flow structure, which gives us an exact and direct understanding of the hypersonic flow.

Methodology for Precious Metal Recovery in Computer Printed Circuit

The life of electronic equipment is becoming increasingly shorter and its replacement always generates a quantity of waste increase, giving rise to a problem of environmental character and still needed new options of solid waste management that will contribute to global sustainable development. Parts of these waste are TCI （the card＇s printed circuit） which containing dangerous elements and turns them into a polluting material from the soil, water and air, being harmful to human health if there is to proper and responsible way, so the recycling of TCI to obtain precious metals is an example of industrial materials that can be recycled. Despite this, large quantities of these are not recycled and some others are not considered. The objective of this work is to present a systematic and ecological methodology for the recovery of valuable materials contained in parts of used in computers, circuit boards using a leaching process. The method determines a set of variables to evaluate the kinetics of the reaction and the leaching of metals that form the substrate of metal and to establish the parameters that affect the rate of leaching of metals through a sensitivity analysis, to identify design alternatives. It determines the quantity and percentages that constitutes the motherboard, processor, video cards, accelerator graphics, network and memory cards RAM, among others and its content of metals such as Cu, Fe, Ag, Au and Pt.

Sensitivity of Coupled Chaotic Dynamical System to Parameters in the Context of Data Assimilation

In this paper, a numerical modeling tool is described which can be used to explore various aspects of four dimensional variational data assimilation and parameter estimation arising in geophysical, environmental, biological and engineering sciences. A major component of this tool is a coupled chaotic dynamical system obtained by coupling two versions of the well-known Lorenz （1963） model with different time scales which differ by a certain time-scale factor. A tangent linear model and its adjoint are considered that correspond to a coupled chaotic system. The general idea of applying sensitivity measures （sensitivity functions） to coupled systems, emphasizing the data assimilation aspects, is explored as well by the forward sensitivity approach. For this purpose the set of sensitivity equations is derived from the nonlinear equations of the coupled dynamical system. To estimate the influence of model parameter uncertainties on the simulated state variables the relative error in the energy norm is used.

Giant magnetoimpedance effect in stress-joule-heated Co-based amorphous ribbons

Co-based Co63Fe4B22.4Si5.6Nb5 amorphous ribbons with a width of 150 μm and a thickness of 50 μm were prepared by single-roller melt-spinning process.The giant magneto-impedance(GMI) effect of the stress-joule-heated ribbons under applied tensile stress ranging from 37 to 148 MPa was investigated.Experimental results show that the spectra of GMI ratio vs.external direct current(dc) field(Hex) of the samples changes dramatically with annealing tension() and driving frequency.The single-peak(SP) GMI curve with maximum GMI ratio of 260% and magnetic field sensitivity of 52%/Oe was obtained in the sample applied tensile stress of 74 MPa at frequency of 3.6 MHz.A three-peak behaviour appeared in the samples under σ of 111 and 148 MPa.The uncommon three-peak behaviour was attributed to several factors,which effectively originated from the balance between domain-wall movement and magnetization rotation.

百达翡丽的“百万俱乐部”

使用百达翡丽名机芯27-460的手表，一股的3445居多，也有一部分早期的年历百达翡丽使用了这款名机，在百达翡丽生产3445型小三针日历表的年代里，通过27—460这款机芯，把百达翡丽的机芯水平提到了一个历史性的高度，至今为止，还没有任何人敢说他们制造的自动日历机芯从技术上，精度上，动力灵敏度上，外观精悍度上能超过27—460，我们也能够理解，使用这款机芯的手表，能做透明底后盖的全做了，就是要展示这款机芯的历史辉煌。