跨境高等教育选择影响因素研究--基于上海大学悉尼工商学院的研究

文章通过推拉因素的分析框架,探究学生选择跨境高等教育的影响因素。参照推拉因素在留学动机中的前期研究,基于跨境高等教育的特点,问卷设计中调整了推拉理论中涉及的宏观环境因素,加入了制度因素,归纳出影响个人选择跨境高等教育的六大类因素:经济因素、学校因素、国家因素、社会文化因素、制度因素和个人因素。以在中外合作院校就读的学生为样本进行问卷调查,运用因子分析的方法,结果发现学生跨境高等教育选择因素与其他高等教育选择影响因素有相近之处,其中学校因素为最重要的影响因素,其他因素的重要程度依次为国家因素、个人因素、社会文化因素、制度因素、经济因素。

矿区生态环境要素的采动损害定量评价方法研究

为了系统研究矿区生态环境的采动损害,必须分析各生态环境要素的采动损害情况,揭示其采动响应机理,并对其采动损害状况进行定量评价。根据采动破坏特点,本文首先分析了矿区生态环境的采动要素构成,并将其划分为建(构)筑物、交通线路、耕地、水环境和地形地貌五大类别。然后描述了各类别的采动响应特征并对其采动损害的影响因素进行了简要分析,在此基础上择取了各要素采动损害定量分析的评价指标。然后提出了各自的采动损害定量评价方法,针对五阳煤矿生态环境的典型采动要素进行了实例分析,分析结果表明评价方法可行,能够满足矿区生态环境采动损害综合分析研究的基础数据需求。

THEORETICAL AND EXPERIMENTAL STUDY ON THE PIEZOCERAMIC ACTUATING LAMINATE

Piezoelectric ceramic element (PCE) is a kind of actuator applied widely on the intelligent material & structure. Establishing the relationship between the transferring stress and the controlling signal, namely the transferring and actuating equation, is a key step to analyze the actuating performance of the PCE. Based on the method of the shear lag theory, the procedure of the stress transferring is analyzed and the transferring and actuating model is established in this paper. Some measurements for PCE(PZT5) actuating the Glass Fiber/Epoxy laminate have been done to verify the model established. The experimental results show that the theoretical model agrees well with the practice. Finally, the effect of the main factors on PCE actuating the laminate is studied by using the experimental and theoretical results.

Nonlinear dynamic analysis of interaction between vehicle and road surfaces for 5-axle heavy truck

Based on the analysis of nonlinear geometric characteristics of the suspension systems and tires, a 3D nonlinear dynamic model of a typical heavy truck is established. The impact factors of dynamic tire loads, including the dynamic load stress factors, and the maximal and the minimal vertical dynamic load factors, are used to evaluate the dynamic interaction between heavy vehicles and roads under the condition of random road surface roughness. Matlab/Simulink is used to simulate the nonlinear dynamic system and calculate the impact factors. The effects of different road surface conditions on the safety of vehicle movement and the durability of parts of a vehicle are analyzed, as well as the effects of different structural parameters and different vehicle speeds on road surfaces. The study results provide both the warning limits of road surface roughness and the limits of corresponding dynamic parameters for the 5-axle heavy truck.

Lewin Behavior Model-Based Study on Influence Factors of Individuals to Mobile Service Demand

How to fmd main influence factors of individuals to mobile service demand is investiga- ted. The empirical research is conducted in the sample of high-value customers in China mobile market. Based on Lewin behavior model, this pa- per establishes factors-matrix from personal and environmental dimensions. Relationships among multiple factors are tested in the structural equa- tion model and their impacts on customers＇ de- mands are elaborated. Findings indicate that opera- tional convenience and business brand image have significant effects on sample users＇ demands. Fur- thermore, annual income, gender, occupation, the needs of access to information and the needs of enriching and improving social relationships are al- so important factors for high-value users. The re- suits may provide further insights into mobile service demand and the model can be popularized to other behavior researches.

Quantitative analysis on influencing factors for interface propagation-based thermal conductivity measurement method during solid-liquid transition

The recently proposed interface propagation-based method has shown its advantages in obtaining the thermal conductivity of phase change materials during solid-liquid transition over conventional techniques. However, in previous investigation, the analysis on the measurement error was qualitative and only focused on the total effects on the measurement without decoupling the influencing factors. This paper discusses the effects of influencing factors on the measurement results for the interface propagation-based method. Numerical simulations were performed to explore the influencing factors, namely model simplification, subcooling and natural convection, along with their impact on the measurement process and corresponding measurement results. The numerical solutions were provided in terms of moving curves of the solid-liquid interface and the predicted values of thermal conductivity. Results indicated that the impact of simplified model was strongly dependent on Stefan number of the melting process. The degree of subcooling would lead to underestimated values for thermal conductivity prediction. The natural convection would intensify the heat transfer rate in the liquid region, thereby overestimating the obtained results of thermal conductivity. Correlations and experimental guidelines are provided. The relative errors are limited in ±1.5%,±3%and ±2% corresponding to the impact of simplified model, subcooling and natural convection, respectively.

EXPERIMENTAL RESEARCH ON EFFECTS OF INITIAL JOINTS ON SURFACE DISPLACEMENT DUE TO COAL MINING

Surface displacement caused by underground coal mining is influenced by many factors such as the depth and thickness of the coal seam and joints in overburben rocks. Extensive efforts have been devoted to the ground surface displacement. Nevertheless, the joints have not been taken into consideration for a long time. In fact, there exist numerous joints and cracks in rocks.As a result, the joints in overburden rocks have to be taken into account. The joints in rocks can be treated as initial damage theoretically. In this paper, two kinds of physical model, one containing no initial joints and anotber containing some initial joints, are employed to systematically investigate effecs of initial joints on surface subsidence. Moreover, within the framework of damage mechanics, the statistical relationships between the characteristic value for surface displacement and damage variable are obtained.

In Vitro Lethal Effect of Photodynamic Therapy on Human Pancreatic Cancer Cells and Its Major Influencing Factors

OBJECTIVE To investigate the in vitro lethal effect of photo- dynamic therapy （PDT） using the photosensitizer hematoporphyrin on the human pancreatic cancer cell line Panc-1, the major influencing factors and the mechanisms of treatment. METHODS Three factors--the time needed for photosensitizer and cell incubation, the photosensitizer concentration （PhoC） and the exposure dose （ExpD）--were examined with different levels of these factors. Optical density （OD） was used as a measure of CCK-8 in the experiment, and was converted to the rate of cell survival. The separate effect of each factor on the photodynamic action was studied, and the interactions were investigated. The effects of different incubation times and PhoC levels on the fluorescence intensity （FI） of the intracellular photosensitizer were determined, and the mechanisms of these factors leading to the therapeutic effects of PDT discussed. RESULTS An increase in the photosensitizer and cell incubation time, an increase of PhoC, and enhancement of the ExpD, produced a corresponding decrease in the rate of Panc-1 cell survival after PDT （P 〈 0.05）. PDT achieved its maximum lethal effects 16 h after starting the incubation, with a PhoC of 10 mg/L and an ExpD of 20 J/cm2; at these levels a synergistic interaction between PhoC and the ExpD occurred, decreasing the cell survival rate （P 〈 0.05）. Neither simple administration of photosensitizer without ExpD （0 J/cm2） or illumination in the absence of PhoC （0 mg/L） affected the rate of cell survival （P 〉 0.05）. With an increase of PhoC and lengthening of the incubation time, the FI of the intracellular photosensitizer accordingly increased （P 〈 0.05）, and attained its maximum value at a PhoC of 10 mg/L and 36 h after the incubation. With an increase of PhoC, the FI of the photosensitizer, hematoporphyrin, in the solution increased progressively at first and then decreased （fluorescence quenching）. CONCLUSION PDT with the photosensitizer hematoporphyrin has clear lethal effects on the human pancreatic cancer cell line Panc-1, but the presence of a photosensitizer and laser irradiation by themselves do not have independent lethal effects. The three influencing factors--the time for photosensitizer and cell incuba- tion, PhoC and ExpD--correlate positively with the PDT response, within certain limits. Beyond these limits, the PDT response does not significantly increase. The main mechanism of the PDT response lies in the effect of these factors on the level of the intracellular photosensitizer and the fluorescence quenching of the photosensitizer. A synergistic effect exists between PhoC and ExpD.

Support-surrounding rock relationship and top-coal movement laws in large dip angle fully-mechanized caving face

When mining the fully-mechanized longwall caving face along strike, the unstable equipment, the low top-coal recovery ratio and the difficulty in controlling surrounding rock may occur due to large dip angle. Considering the effects of strike angle on support stability, the ‘‘support-surrounding rock"mechanical models of support topple and support slip were established in this paper. On the basis, the influencing factors of support stability were analyzed and the technical measures of controlling support and surrounding rock stability were put forward. Then the loose particles simulation experiment was conducted to analyze the impacts of caving directions and methods on the top-coal recovery in large dip angle fully-mechanized caving face. Finally, the ‘‘upward sequence and double-openings doublerounds" caving technology was determined. The research results are of great scientific significance and practical values to improve large dip thick seam mining technology.

Pressure fluctuation and its influencing factors in circulating water pump

In order to investigate the effect of sampling frequency and time on pressure fluctuations, the three-dimensional unsteady numerical simulations were conducted in a circulating water pump. Through comparison of turbulence models with hydraulic performance experiment, SST k-co model was confirmed to study the rational determination of sampling frequency and time better. The Fast Fourier Transform （FFT） technology was then adopted to process those fluctuating pressure signals obtained. On these bases, the characteristics of pressure fluctuations acting on the tongue were discussed. It is found that aliasing errors decrease at higher sampling frequency of 17 640 Hz, but not at a lower sampling frequency of 1 764 Hz. Correspondingly, an output frequency range ten-times wider is obtained at 17 640 Hz. Compared with 8R, when the sampling time is shorter, the amplitudes may be overvalued, and the frequencies and amplitudes of low-frequency fluctuations can not be well predicted. The frequencies at the tongue are in good agreement with the values calculated by formula and the frequency compositions less than the blade passing frequency are accurately predicted.

A dynamic analysis of water footprint of Jinghe River basin

Water footprint in a region is defined as the volume of water needed for the production of goods and services consumed by the local people, Ecosystem services are a kind of important services, so ecological water use is one necessary component in water footprint. Water footprint is divided into green water footprint and blue water footprint but the former one is often ignored.In this paper waterJootprint includes blue water needed by agricultural irrigation, industrial and domestic water demand, and green water needed by crops, economic forests, livestock prochtcts, forestlalands and grasslands. The study calculates the footprint of the Jinghe River basin in 1990, 1995, 2000 and 2005 with quarto methods. Results of research show that water footprints reached 164.1 ×10^8m3, 175. 69 ×10^8m3 and 178. 45 ×10^8m3 respectively in 1990, 1995 and 2000 including that of ecological water use, but reached 77.68×10^8m3, 94.24×10^8m3, 92.92×10^8m3 and 111.36 ×10^8m3 respectively excluding that of ecological water use. Green water.footprint is much more than blue water footprint; thereby, green water plays an important role in economic development and ecological construction The dynamic change of water footprints shows that blue water use increases rapidly and that the ecological water use is occupied by economie and domestic water use. The change also shows that water use is transferred from primary industry to secondary industry In primary industry, it is transferred from crops farming to forestry, and animal agriculture. The factors impelling the change include development anticipation on econonomy; government policies, readjustment of the industrial structure, population growth, the raise of urbanization level, and structurul change of consumption, low level of waler-saving and poor ability of waste water treatment.With blue water use per unit, green water use per unit, blue water use structure and green water use structure, we analyzed the difference of the six ecologieal function districts of the Jinghe River basin. Future ecological construction may influence on blue water use of District V and District Ⅵ at middle and lower reaches. At last some suggestions are given for effective water resouree use.

High-efficiency acetaldehyde removal during solid-state polycondensation of poly(ethylene terephthalate) assisted by supercritical carbon dioxide

The concentration of acetaldehyde(AA) is the main quality index of poly(ethylene terephthalate)(PET) used in food and drink packaging.A new method for AA removal has been developed by using supercritical carbon dioxide(sc CO2) during the solid-state polycondensation of PET.The influence factors of AA removal including the temperature,pressure,reaction time and the size of pre-polymer particles are systematically studied in this work.The results indicate that it is a highly efficient way to obtain high molecular weight PET with relative low concentration of AA.Correspondingly,the polymerization degree of PET could increase from 27.9 to 85.6 while the concentration of AA reduces from 0.229 × 10^(-6) to 0.055 × 10^(-6) under the optimal operation conditions of 230 °C,8 MPa and size of 0.30–0.45 mm.Thermodynamic performance tests show the increasing extent of PET crystallinity due to the fact that the plasticization of sc CO_2 is not obvious with extended reaction time,therefore the increasing crystallinity has no significant influence on AA removal.SEM observations reveal that the effects of sc CO_(2-) induced plasticization and swelling on PET increase significantly with the decrease of prepolymer size,and the surface of PET becomes more loose and porous in favor of the AA removal.

Dynamic Changes,Regional Differences,and Influencing Factorsof CO_2 Emission Performance in China

This paper proposes to use DEA models with undesirable outputs to construct the Malmquist index that can be use to investigate the dynamic changes of CO 2 emission performance.With the index,the authors have measured the CO 2 emission performance of 28 provinces and autonomous regions in China from 1996 to 2007;with the convergence theory and panel data regression model,the authors analyze the regional differences and the influencing factors.It is found that the performance of CO 2 emissions in China has been continuously improved mainly due to the technological progress,and the average improvement rate is 3.25%,with a cumulative improvement rate of 40.86%.In addition,the CO 2 emission performance varies across four regions.As a whole,the performance score of eastern China is the highest.The northeastern and central China has relatively lower performance scores,and the western China is relatively backward.The regional differences are decreasing,and the performance of CO 2 emissions is convergent.The influence of some factors on the performance of CO 2 emissions is significant,such as the level of economic development,the level of industrial structure,energy intensity,and ownership structure.The influence of some factors,such as opening-up to the outside world,on the performance of CO 2 emissions is not significant..

Degradation of chlorothalonil by ultrasonic irradiation:Kinetics and impact factors

Factors on degradation of chlorothalonil(CLT) in water by high frequency ultrasonic irradiation were investigated.The effects of initial concentration of chlorothalonil,dosages of tertiary butyl alcohol,humic acid and initial pH value on degradation of chlorothalonil,as well as the reaction mechanism were studied.The results reveal that chlorothalonil could be effectively degradated by ultrasonic irradiation.The reaction constant value kapp decreased from 0.014 1 to 0.010 2 min-1 with the initial concentration increasing from 50 to 400 μg/L during 180 min irradiation.Tertiary butyl alcohol had negative effect on chlorothalonil degradation,while lower concentration of humic acid promoted the sonolysis,and kapp declined with the further concentration increasing.The kapp varied little when the pH value ranged from 3.10 to 10.28.It may be concluded that mechanical and pyrolysis process played main roles on the degradation of chlorothalonil in ultrasonic irradiation rather than ·OH attack.The electrical energy per order(EEo) values for sonolysis degradation of CLT were also calculated to evaluate the cost of the process.

Variation of Floods Characteristics and Their Responses to Climate and Human Activities in Poyang Lake, China

The Poyang Lake is one of the most frequently flooded areas in China. Understanding the changing characteristics of floods as well as the affecting factors is an important prerequisite of flood disaster prevention and mitigation. The present study identified the characteristics variations of historical floods in the Poyang Lake and their tendencies based on the Mann-Kendall(M-K) test, and also investigated the related affecting factors, both from climate and human activities. The results revealed that the highest flood stages, duration as well as hazard coefficient of floods showed a long-term increasing linear trend during the last 60 years with the M-K statistic of 1.49, 1.60 and 1.50, respectively. And, a slightly increasing linear trend in the timing of the highest stages indicated the floods occurred later and later during the last six decades. The rainfall during the flood season and subsequent discharges of the Changjiang(Yangtze) River and runoff from the Poyang Lake Basin were mainly responsible for the severe flood situation in the Poyang Lake in the 1990 s. In addition, the intensive human activities, including land reclamation and levee construction, also played a supplementary role in increasing severity of major floods. While, the fewer floods in the Poyang Lake after 2000 can be attributed to not only the less rainfall over the Poyang Lake Basin and low discharges of the Changjiang River during flood periods, but also the stronger influences of human activity which increased the floodwater storage of the Poyang Lake than before.

Some advances on investigating friction characteristics of rolling guide ways

A review of research on hyste-resis and stick-slip is presented in this paper. Devices for investigating friction hysteresis and stick-slip of linear rolling guide ways are introduced,as well as some experiment results and conclusions,and some factors impacting on stick-slip are also exhibited.

Factors affecting the dynamic response of pre-stressed anchors after transient excitation

The wide application of pre-stressed bolting technology in coal mine tunnels has made the nondestructive stress wave reflection method of determining bolting quality an important one. The effect of the support plate on the dynamic response of the pre-stressed anchor is of particular interest. A theoretical analysis and numerical simulations are used to identify the factors affecting the contact stress between the support plate and the rock wall. A formula allowing the calculation of contact stress is presented. Stress wave propagation through the nut, support plate, and rock wall are predicted. The dynamic response signals were measured in the field using prestressed anchors pre-tightened to different torques. The effects from the support plate on the dynamic response were recorded and the results compared to the predictions of pre-stressed anchor. This work provides a theoretical reference for the signal processing of dynamic reflected wave signals in anchor bolts.

Factors Associated with Physical-Activity Performance by Older Individuals in a Medium-Sized City in S^o Paulo State, Brazil

Physical activity has been scientifically discussed as fundamental in the process of healthy ageing. Hence, this study aimed at determining the factors that influence older people to perform physical activities. The complete IPAQ （International Physical Activity Questionnaire） was applied to a population-based sample consisting of 364 elderly persons in the city of Botucatu, SAo Paulo, Brazil. Days of physical activity performed by the older people were considered by taking into account household and leisure activities. Models for count data were fitted by including socio-demographic variables as well as those related to life satisfaction. It was shown that housework physical-activity performance is associated with female, who predominantly showed to be more active in all levels. Male seemed to be more predisposed to perform lighter recreation, sports and leisure-time physical activities, such as walking. Additionally, poor schooling showed to he decisive for not performing physical activities both at home and during leisure.

A National Cross-Sectio nal Survey Dataset on Com mon Disease and Influencing Factors of Chinese Internal Migrants in 2017

This data article describes the dataset from a national cross-sectional questionnaire survey on Chinese internal migrants in 2017.The survey was part of the Chinese Migrants Dynamic Survey,which is an annually conducted large-scale national questionnaire survey on internal migrants.The respondents in the described dataset were migrants and registered local residents aged over 15 years old.A multistage stratified probability-proportionalto-size(PPS) sampling method based on the 2016 annual report data of China Migrant Population was adopted.The questionnaire was designed to collect demographic information of respondents and their family members,intention of migration or settlement,health status,health services accessibility,social integration,and epidemic influencing factors of common diseases,including hypertension,type 2 diabetes,diarrhea,fever,rash,icterus,conjunctival redness,cold,and other illnesses or injuries.The sample population in this survey include 13,998 internal migrants and 14,000 registered local residents from eight domestic cities/prefecture/districts across China.It is the most widely covering and highly representative dataset on common diseases and influencing factors of internal migrants in China.The dataset can be used to study common diseases and influencing factors among floating Chinese population.It provides data support for government to improve healthcare accessibility and the equity of public health services for internal migrants in China.

Influence and Control Strategy for Local Settlement for High-Speed Railway Infrastructure

This paper discusses the main impact factors of the local settlement and differential settlement of high- speed railway lines. The analysis results show that groundwater exploitation is the direct cause of differ- ential settlement. Based on the study of ballastless track additional load and of vehicle, track, and bridge dynamic responses under different differential settlements, a control standard of differential settlement during operation is proposed preliminarily.