To reveal the water inrush mechanics of underground deep rock mass subjected to dynamic disturbance such as blasting, compression-shear rock crack initiation rule and the evolution of crack tip stress intensity factor...To reveal the water inrush mechanics of underground deep rock mass subjected to dynamic disturbance such as blasting, compression-shear rock crack initiation rule and the evolution of crack tip stress intensity factor are analyzed under static-dynamic loading and seepage water pressure on the basis of theoretical deduction and experimental research. It is shown that the major influence factors of the crack tip stress intensity factor are seepage pressure, dynamic load, static stress and crack angle. The existence of seepage water pressure aggravates propagation of branch cracks. With the seepage pressure increasing, the branch crack experiences unstable extension from stable propagation. The dynamic load in the direction of maximum main stress increases type I crack tip stress intensity factor and its influence on type II crack intensity factor is related with crack angle and material property. Crack initiation angle changes with the dynamic load. The initial crack initiation angle of type I dynamic crack fracture is 70.5°. The compression-shear crack initial strength is related to seepage pressure, confining pressure, and dynamic load. Experimental results verify that the initial crack strength increases with the confining pressure increasing, and decreases with the seepage pressure increasing.展开更多
Based on laboratory tests of artificial fractures in mortar material, established the dynamic constitutive model of normal behaviour of rock fracture,. The tests were systematically conducted under quasi-static and dy...Based on laboratory tests of artificial fractures in mortar material, established the dynamic constitutive model of normal behaviour of rock fracture,. The tests were systematically conducted under quasi-static and dynamic monotonic loading conditions. The fractures were of different numbers of asperities in contact and were subsequently of different initial contact areas, which imitated the natural rock fractures. The rate of compressive load applied normal to the fractures covers a wide range from 10–1 MPa/s (quasi-static) up to 103 MPa/s (highly dynamic). The normal stress-closure responses of fractures were measured for different loading rates. Based on the stress-closure relation curves measured, a nonlinear (hyperbolic) dynamic model of fracture, normal behaviour, termed as dynamic BB model, was proposed, which was modified from the existing BB model of static normal behaviour of fractures by taking into account the effect of loading rate.展开更多
In this study,based on the dynamic Biot＇s theory ＂u-p＂ approximation,a 3D finite element method（FEM） numerical soil model is developed,in which the Generalized Newmark-β method is adopted to determine the time i...In this study,based on the dynamic Biot＇s theory ＂u-p＂ approximation,a 3D finite element method（FEM） numerical soil model is developed,in which the Generalized Newmark-β method is adopted to determine the time integration.The developed 3D FEM soil model is a part of the coupled model PORO-WSSI 3D for 3D wave-seabed-marine structures interaction problem,and is validated by the analytical solution proposed by Wang（2000） for a laterally infinite seabed loaded by a uniform force.By adopting the developed 3D soil model,the consolidation of seabed under a caisson breakwater and hydrostatic pressure is investigated.The numerical results show that the caisson breakwater built on seabed has very significant effect on the stresses/displacements fields in the seabed foundation after the transient deformation and primary consolidation are completed.The parametric study indicates that the Young＇s modulus E of seabed is the most important parameter to affect the settlement of breakwater,and the displacement fields in seabed foundation.Taking the consolidation status as the initial condition,the interaction between ocean wave,caisson breakwater and seabed foundation is briefly investigated.The 3D ocean wave is determined by solving the Navier-Stokes equations with finite volume method（FVM）.The numerical results indicate that there is intensive interaction between oceean wave, caisson breakwater and seabed foundation; and the breakwater indeed can effectively block the wave energy propagating to the coastline.展开更多
基金Projects(51174228,51174088,51204068,51274097)supported by the National Natural Science Foundation of China
文摘To reveal the water inrush mechanics of underground deep rock mass subjected to dynamic disturbance such as blasting, compression-shear rock crack initiation rule and the evolution of crack tip stress intensity factor are analyzed under static-dynamic loading and seepage water pressure on the basis of theoretical deduction and experimental research. It is shown that the major influence factors of the crack tip stress intensity factor are seepage pressure, dynamic load, static stress and crack angle. The existence of seepage water pressure aggravates propagation of branch cracks. With the seepage pressure increasing, the branch crack experiences unstable extension from stable propagation. The dynamic load in the direction of maximum main stress increases type I crack tip stress intensity factor and its influence on type II crack intensity factor is related with crack angle and material property. Crack initiation angle changes with the dynamic load. The initial crack initiation angle of type I dynamic crack fracture is 70.5°. The compression-shear crack initial strength is related to seepage pressure, confining pressure, and dynamic load. Experimental results verify that the initial crack strength increases with the confining pressure increasing, and decreases with the seepage pressure increasing.
文摘Based on laboratory tests of artificial fractures in mortar material, established the dynamic constitutive model of normal behaviour of rock fracture,. The tests were systematically conducted under quasi-static and dynamic monotonic loading conditions. The fractures were of different numbers of asperities in contact and were subsequently of different initial contact areas, which imitated the natural rock fractures. The rate of compressive load applied normal to the fractures covers a wide range from 10–1 MPa/s (quasi-static) up to 103 MPa/s (highly dynamic). The normal stress-closure responses of fractures were measured for different loading rates. Based on the stress-closure relation curves measured, a nonlinear (hyperbolic) dynamic model of fracture, normal behaviour, termed as dynamic BB model, was proposed, which was modified from the existing BB model of static normal behaviour of fractures by taking into account the effect of loading rate.
基金the financial support from EPSRC #EP/ G006482/1the funding support of Oversea Research Student Award from Scottish Government, UK
文摘In this study,based on the dynamic Biot＇s theory ＂u-p＂ approximation,a 3D finite element method（FEM） numerical soil model is developed,in which the Generalized Newmark-β method is adopted to determine the time integration.The developed 3D FEM soil model is a part of the coupled model PORO-WSSI 3D for 3D wave-seabed-marine structures interaction problem,and is validated by the analytical solution proposed by Wang（2000） for a laterally infinite seabed loaded by a uniform force.By adopting the developed 3D soil model,the consolidation of seabed under a caisson breakwater and hydrostatic pressure is investigated.The numerical results show that the caisson breakwater built on seabed has very significant effect on the stresses/displacements fields in the seabed foundation after the transient deformation and primary consolidation are completed.The parametric study indicates that the Young＇s modulus E of seabed is the most important parameter to affect the settlement of breakwater,and the displacement fields in seabed foundation.Taking the consolidation status as the initial condition,the interaction between ocean wave,caisson breakwater and seabed foundation is briefly investigated.The 3D ocean wave is determined by solving the Navier-Stokes equations with finite volume method（FVM）.The numerical results indicate that there is intensive interaction between oceean wave, caisson breakwater and seabed foundation; and the breakwater indeed can effectively block the wave energy propagating to the coastline.
