To investigate the validity of two dynamic modulus predictive models（ Witczak 1-37 A viscosity-based model and Witczak 1-40 D shear modulus-based model） in the context of Jiangsu, and evaluate the effect of differen...To investigate the validity of two dynamic modulus predictive models（ Witczak 1-37 A viscosity-based model and Witczak 1-40 D shear modulus-based model） in the context of Jiangsu, and evaluate the effect of different mixture design variables（ aggregate gradations, binder type, and volumetric properties） on dynamic modulus E＊, asphalt mixtures commonly used in the local surface layer, including Sup-13 and AC-13, are prepared in the laboratory and their dynamic modulus E＊values are predicted based on the above mentioned models. The corresponding asphalt tests, including viscosity and dynamic shear modulus tests, are also carried out to obtain the prediction model parameters. The test results showthat binder type and asphalt content have a significant impact on dynamic modulus.There is a good correlation between the E＊values based on above two predictive models and the measured E＊, while a relatively lower bias can be expected from Witczak 1-37 A model. The test results can be used for the calibration of dynamic modulus with higher accuracy.展开更多
Angular measuring system is the most important component of a servo turntable in inertial test apparatus. Its function and precision determine the turntable＇ s function and precision. It attaches importance to resear...Angular measuring system is the most important component of a servo turntable in inertial test apparatus. Its function and precision determine the turntable＇ s function and precision. It attaches importance to research on inertial test equipment. This paper introduces the principle of the angular measuring system using amplitude discrimination mode. The dynamic errors axe analyzed from the aspects of inductosyn, amplitude and function error of double-phase voltage and wavefonn distortion. Through detailed calculation, theory is provided for practical application; system errors are allocated and the angular measuring system meets the accuracy requirement. As a result, the schedule of the angular measuring system can be used in practice.展开更多
We provide a general dynamical approach for the quantum Zeno and anti-Zeno effects in an open quantum system under repeated non-demolition measurements. In our approach the repeated measurements are described by a gen...We provide a general dynamical approach for the quantum Zeno and anti-Zeno effects in an open quantum system under repeated non-demolition measurements. In our approach the repeated measurements are described by a general dynamical model without the wave function collapse postulation. Based on that model, we further study both the short-time and long-time evolutions of the open quantum system under repeated non-demolition measurements, and derive the measurement-modified decay rates of the excited state. In the cases with frequent ideal measurements at zero-temperature, we re-obtain the same decay rate as that from the wave function collapse postulation （Nature, 2000, 405： 546）. The correction to the ideal decay rate is also obtained under the non-ideal measurements. Especially, we find that the quantum Zeno and anti-Zeno effects are possibly enhanced by the non-ideal natures of measurements. For the open system under measurements with arbitrary period, we generally derive the rate equation for the long-time evolution for the cases with arbitrary temperature and noise spectrum, and show that in the long-time evolution the noise spectrum is effectively tuned by the repeated measurements. Our approach is also able to describe the quantum Zeno and anti-Zeno effects given by the phase modulation pulses, as well as the relevant quantum control schemes.展开更多
The semi-circular bend(SCB) dynamic fracture toughness test is simulated using discrete element models. The influence of the frictional boundary condition, constitutive law and specimen thickness on the test measureme...The semi-circular bend(SCB) dynamic fracture toughness test is simulated using discrete element models. The influence of the frictional boundary condition, constitutive law and specimen thickness on the test measurements is investigated. It is found that friction between loading plates and the rock specimen affects the test results. Therefore, friction must be carefully considered to obtain accurate measurements. The simulation results also show that in contrast to the 2D model in which a rate-dependent cohesive law must be introduced, 3D models with a rate-independent law can produce good results. Furthermore, the study suggests that test measurements are seriously affected by specimen thickness; thus, full 3D modeling is required for simulation of the SCB test.展开更多
A kinematical model （a parameterized deceleration parameter） and a dynamical model （a parameterized equation of state for dark energy） are constrained from the current observational data including the high-redshif...A kinematical model （a parameterized deceleration parameter） and a dynamical model （a parameterized equation of state for dark energy） are constrained from the current observational data including the high-redshift Gamma-Ray Bursts （GRBs） data with a redshift range from 1.4 to 9. We obtain the stringent constraint on the values of current deceleration parameter q0, current jerk parameter j0, current equation of state for dark energy Woae and transition redshift zT. In addition, we compare the difference of the constraint results between the kinematical and the dynamical scenarios.展开更多
基金The Specialized Research Fund for the Doctoral Program of Higher Education of China(No.20120092110053)
文摘To investigate the validity of two dynamic modulus predictive models（ Witczak 1-37 A viscosity-based model and Witczak 1-40 D shear modulus-based model） in the context of Jiangsu, and evaluate the effect of different mixture design variables（ aggregate gradations, binder type, and volumetric properties） on dynamic modulus E＊, asphalt mixtures commonly used in the local surface layer, including Sup-13 and AC-13, are prepared in the laboratory and their dynamic modulus E＊values are predicted based on the above mentioned models. The corresponding asphalt tests, including viscosity and dynamic shear modulus tests, are also carried out to obtain the prediction model parameters. The test results showthat binder type and asphalt content have a significant impact on dynamic modulus.There is a good correlation between the E＊values based on above two predictive models and the measured E＊, while a relatively lower bias can be expected from Witczak 1-37 A model. The test results can be used for the calibration of dynamic modulus with higher accuracy.
文摘Angular measuring system is the most important component of a servo turntable in inertial test apparatus. Its function and precision determine the turntable＇ s function and precision. It attaches importance to research on inertial test equipment. This paper introduces the principle of the angular measuring system using amplitude discrimination mode. The dynamic errors axe analyzed from the aspects of inductosyn, amplitude and function error of double-phase voltage and wavefonn distortion. Through detailed calculation, theory is provided for practical application; system errors are allocated and the angular measuring system meets the accuracy requirement. As a result, the schedule of the angular measuring system can be used in practice.
基金supported by the National Natural Science Foundation of China(Grant Nos.11074305,10935010,11074261 and 11121403)the National Basic Research Program of China(Grant Nos.2012CB922104 and 2014CB921402)
文摘We provide a general dynamical approach for the quantum Zeno and anti-Zeno effects in an open quantum system under repeated non-demolition measurements. In our approach the repeated measurements are described by a general dynamical model without the wave function collapse postulation. Based on that model, we further study both the short-time and long-time evolutions of the open quantum system under repeated non-demolition measurements, and derive the measurement-modified decay rates of the excited state. In the cases with frequent ideal measurements at zero-temperature, we re-obtain the same decay rate as that from the wave function collapse postulation （Nature, 2000, 405： 546）. The correction to the ideal decay rate is also obtained under the non-ideal measurements. Especially, we find that the quantum Zeno and anti-Zeno effects are possibly enhanced by the non-ideal natures of measurements. For the open system under measurements with arbitrary period, we generally derive the rate equation for the long-time evolution for the cases with arbitrary temperature and noise spectrum, and show that in the long-time evolution the noise spectrum is effectively tuned by the repeated measurements. Our approach is also able to describe the quantum Zeno and anti-Zeno effects given by the phase modulation pulses, as well as the relevant quantum control schemes.
基金supported by the Australian Research Council(Grant No.DE130100457)State Key Laboratory of Hydraulics and Mountain River Engineering(SKHL)(Grant No.SKHL1407)the National Natural Science Foundation of China(Grant Nos.41202207,51204112 and 2015JY0045)
文摘The semi-circular bend(SCB) dynamic fracture toughness test is simulated using discrete element models. The influence of the frictional boundary condition, constitutive law and specimen thickness on the test measurements is investigated. It is found that friction between loading plates and the rock specimen affects the test results. Therefore, friction must be carefully considered to obtain accurate measurements. The simulation results also show that in contrast to the 2D model in which a rate-dependent cohesive law must be introduced, 3D models with a rate-independent law can produce good results. Furthermore, the study suggests that test measurements are seriously affected by specimen thickness; thus, full 3D modeling is required for simulation of the SCB test.
基金supported by the National Natural Science Foundation of China (Grant Nos.11147150,11175077 and 11005088)the Natural Science Foundation of Education Department of Liaoning Province (Grant No. L2011189)the Natural Science Foundation of Liaoning Province,China (Grant No.20102124)
文摘A kinematical model （a parameterized deceleration parameter） and a dynamical model （a parameterized equation of state for dark energy） are constrained from the current observational data including the high-redshift Gamma-Ray Bursts （GRBs） data with a redshift range from 1.4 to 9. We obtain the stringent constraint on the values of current deceleration parameter q0, current jerk parameter j0, current equation of state for dark energy Woae and transition redshift zT. In addition, we compare the difference of the constraint results between the kinematical and the dynamical scenarios.
