Amidst growing environmental protection intensity by the Chinese government, this paper investigates the effects of environmental regulation on China＇s industrial pollution treatment productivity and environmental TF...Amidst growing environmental protection intensity by the Chinese government, this paper investigates the effects of environmental regulation on China＇s industrial pollution treatment productivity and environmental TFP. By estimating China＇s pollution treatment productivity between 2001 and 2008 and analyzing environmental regulation intensity and the effects of the relevant factors and pollution treatment productivity using panel data, this paper discovers that （1） pollution treatment productivity contributed a significant share of about 40% to industrial environmental TFP during the investigation period; （2） environmental regulation may not necessarily cause adverse impacts on pollution treatment efficiency and productivity but demonstrates a U-shaped relationship： when the share of pollution treatment cost in industrial value-added is above the range of 3.8%-5.1%, environmental regulation is likely to promote pollution treatment productivity and thus environmental TFP Judging by the estimation result, enhancing environmental protection and expediting the development of ecological civilization are conducive to China ＂s economic transition towards an intensive, efficient, circular, and sustainable development pattern. China＇s current industrial development has the capacity to tolerate a rather demanding level of pollution treatment and management and China needs to further rely on energy conservation and the environmental production industries to promote the progress of pollution treatment technologies.展开更多
Today＇s production systems are demanded to exhibit an increased flexibility and mutability in order to deal with dynamically changing conditions, objectives and an increasing number of product variants within industr...Today＇s production systems are demanded to exhibit an increased flexibility and mutability in order to deal with dynamically changing conditions, objectives and an increasing number of product variants within industrial turbulent environments. Flexible automated systems are requested in order to improve dynamic production efficiency, e.g. robot-based hardware and PC-based controllers, but these usually induce a significantly higher production complexity, whereby the efforts for planning and programming, but also setups and reconfiguration, expand. In this paper a definition and some concepts of self-optimizing assembly systems are presented to describe possible ways to reduce the planning efforts in complex production systems. The concept of self-optimization in assembly systems will be derived from a theoretical approach and will be transferred to a specific application scenario---the automated assembly of a miniaturized solid state laser--where the challenges of unpredictable influences from e.g. component tolerances can be overcome by the help of self-optimization.展开更多
Logging residue can be defined as any form of wood, which under the highest stage of technological development could be used in manufacturing but is left in the forest during logging. Lumber production from logging re...Logging residue can be defined as any form of wood, which under the highest stage of technological development could be used in manufacturing but is left in the forest during logging. Lumber production from logging residues of a previous logging activity by a timber firm was undertaken with the objective of determining the suitability of utilizing buttressed-stumps as raw material for the timber industry. A horizontal mobile bandsaw machine was used to process the buttressed-stumps into lumber. The machine was characterized by a thin-kerr sawing technology （kerf-width 1.6 mm） compared to the conventional bandsaw machines of kerr-widths ranging from 3.0-4.5 mm. Lumber value and volume yields, fuel consumption rate, frequency of tool replacement and lumber production rate were assessed. Results indicated that there is the potential to increase timber production from logging residues by utilizing buttressed-stumps. Lumber value and volume yields of eight timber species investigated in this study ranged from 5%-31% and 34%-54% respectively. Fuel consumption rate which increased with increasing wood density, ranged from 5-14.5 liters/m3 of lumber produced. Frequency of saw replacement increased with increasing wood density. The number of saws required to produce one cubic meter of lumber, ranged from 1 to 7. Lumber production rate ranged from 0.10-0.38 m3/hour, increasing with decreasing wood density.展开更多
文摘Amidst growing environmental protection intensity by the Chinese government, this paper investigates the effects of environmental regulation on China＇s industrial pollution treatment productivity and environmental TFP. By estimating China＇s pollution treatment productivity between 2001 and 2008 and analyzing environmental regulation intensity and the effects of the relevant factors and pollution treatment productivity using panel data, this paper discovers that （1） pollution treatment productivity contributed a significant share of about 40% to industrial environmental TFP during the investigation period; （2） environmental regulation may not necessarily cause adverse impacts on pollution treatment efficiency and productivity but demonstrates a U-shaped relationship： when the share of pollution treatment cost in industrial value-added is above the range of 3.8%-5.1%, environmental regulation is likely to promote pollution treatment productivity and thus environmental TFP Judging by the estimation result, enhancing environmental protection and expediting the development of ecological civilization are conducive to China ＂s economic transition towards an intensive, efficient, circular, and sustainable development pattern. China＇s current industrial development has the capacity to tolerate a rather demanding level of pollution treatment and management and China needs to further rely on energy conservation and the environmental production industries to promote the progress of pollution treatment technologies.
文摘Today＇s production systems are demanded to exhibit an increased flexibility and mutability in order to deal with dynamically changing conditions, objectives and an increasing number of product variants within industrial turbulent environments. Flexible automated systems are requested in order to improve dynamic production efficiency, e.g. robot-based hardware and PC-based controllers, but these usually induce a significantly higher production complexity, whereby the efforts for planning and programming, but also setups and reconfiguration, expand. In this paper a definition and some concepts of self-optimizing assembly systems are presented to describe possible ways to reduce the planning efforts in complex production systems. The concept of self-optimization in assembly systems will be derived from a theoretical approach and will be transferred to a specific application scenario---the automated assembly of a miniaturized solid state laser--where the challenges of unpredictable influences from e.g. component tolerances can be overcome by the help of self-optimization.
文摘Logging residue can be defined as any form of wood, which under the highest stage of technological development could be used in manufacturing but is left in the forest during logging. Lumber production from logging residues of a previous logging activity by a timber firm was undertaken with the objective of determining the suitability of utilizing buttressed-stumps as raw material for the timber industry. A horizontal mobile bandsaw machine was used to process the buttressed-stumps into lumber. The machine was characterized by a thin-kerr sawing technology （kerf-width 1.6 mm） compared to the conventional bandsaw machines of kerr-widths ranging from 3.0-4.5 mm. Lumber value and volume yields, fuel consumption rate, frequency of tool replacement and lumber production rate were assessed. Results indicated that there is the potential to increase timber production from logging residues by utilizing buttressed-stumps. Lumber value and volume yields of eight timber species investigated in this study ranged from 5%-31% and 34%-54% respectively. Fuel consumption rate which increased with increasing wood density, ranged from 5-14.5 liters/m3 of lumber produced. Frequency of saw replacement increased with increasing wood density. The number of saws required to produce one cubic meter of lumber, ranged from 1 to 7. Lumber production rate ranged from 0.10-0.38 m3/hour, increasing with decreasing wood density.
