This paper presents the methodology and results of modelling of Earth magnetic field disturbances induced by ferromagnetic objects. The modeling was carried out using the finite elements calculations, and the results ...This paper presents the methodology and results of modelling of Earth magnetic field disturbances induced by ferromagnetic objects. The modeling was carried out using the finite elements calculations, and the results were compared with the measurements. The special test stand, consisting of magnetovision scanner and Helmholtz coils, has been used. The measurement system is able to measure the distribution of planar magnetic induction vectors, and to differentiate the sources of measured disturbances.展开更多
Objective: To analyze the stress distribution of calcaneus with posterior articular facet compressed after fracture and talus during gait. Methods: A wedge under the posterior articular was transected from a normal fi...Objective: To analyze the stress distribution of calcaneus with posterior articular facet compressed after fracture and talus during gait. Methods: A wedge under the posterior articular was transected from a normal finite element model of calcaneus and talus to simulate malformation of compression of the posterior facet after fracture of calcaneus. The model was used to simulate for three subphases of the stance during the gait(heel strike, midstance, push off) and calculate the finite element. The results were compared with normal situation. Results: The stress distribution within the bone in situation of malformation was obtained and regions of elevated stresses for three subphases were located. The results were significantly different from that of normal situation. Conclusion: The simulation of calcaneus and talus in malformation has important clinic implication and can provide an insight into the factors contributing to many clinic pathogenic changes after fracture of calcaneus.展开更多
An offshore platform of jacket type in Bohai Bay vibrated excessively under design environmental conditions, which had affected the normal operation of the platform. In order to mitigate the vibration of the platform,...An offshore platform of jacket type in Bohai Bay vibrated excessively under design environmental conditions, which had affected the normal operation of the platform. In order to mitigate the vibration of the platform, it is essentially important to explore the cause of the vibration. So the objective of this study is to investigate the cause of the excessive vibration. In this paper, dynamic characteristics of the offshore platform is analyzed by numerical simulation using finite element (FE) modeling. For further verifying the numerical results, model experiment is conducted. Numerical and experimental results demonstrate that there is relative movement and impact between the piles and the jacket, i.e. the piles and the jacket didnt connect well to an entity. It is this cause that the stiffness of the platform decreases and the impact between piles and the jacket legs induces excessive vibration. And also the grouting measure is advised to reduce the vibration of the offshore platform according to the analysis results.展开更多
文摘This paper presents the methodology and results of modelling of Earth magnetic field disturbances induced by ferromagnetic objects. The modeling was carried out using the finite elements calculations, and the results were compared with the measurements. The special test stand, consisting of magnetovision scanner and Helmholtz coils, has been used. The measurement system is able to measure the distribution of planar magnetic induction vectors, and to differentiate the sources of measured disturbances.
文摘Objective: To analyze the stress distribution of calcaneus with posterior articular facet compressed after fracture and talus during gait. Methods: A wedge under the posterior articular was transected from a normal finite element model of calcaneus and talus to simulate malformation of compression of the posterior facet after fracture of calcaneus. The model was used to simulate for three subphases of the stance during the gait(heel strike, midstance, push off) and calculate the finite element. The results were compared with normal situation. Results: The stress distribution within the bone in situation of malformation was obtained and regions of elevated stresses for three subphases were located. The results were significantly different from that of normal situation. Conclusion: The simulation of calcaneus and talus in malformation has important clinic implication and can provide an insight into the factors contributing to many clinic pathogenic changes after fracture of calcaneus.
文摘An offshore platform of jacket type in Bohai Bay vibrated excessively under design environmental conditions, which had affected the normal operation of the platform. In order to mitigate the vibration of the platform, it is essentially important to explore the cause of the vibration. So the objective of this study is to investigate the cause of the excessive vibration. In this paper, dynamic characteristics of the offshore platform is analyzed by numerical simulation using finite element (FE) modeling. For further verifying the numerical results, model experiment is conducted. Numerical and experimental results demonstrate that there is relative movement and impact between the piles and the jacket, i.e. the piles and the jacket didnt connect well to an entity. It is this cause that the stiffness of the platform decreases and the impact between piles and the jacket legs induces excessive vibration. And also the grouting measure is advised to reduce the vibration of the offshore platform according to the analysis results.
