期刊文献+
共找到9篇文章
< 1 >
每页显示 20 50 100
助硫化剂对过氧化物共硫化NBR/CM的影响 被引量:2
1
作者 高新文 陈春花 辛振祥 《弹性体》 CAS 北大核心 2009年第3期53-56,共4页
研究了不同助硫化剂对过氧化物共硫化NBR/CM的影响。实验结果表明,助硫化剂S、PDM和Zn(MMA)2均能有效地提高共混物的拉伸强度和撕裂强度;助硫化剂S和TCY均能降低共混物的DIN磨耗体积。
关键词 丁腈橡胶 氯化聚乙烯 助硫化剂 DIN磨耗
下载PDF
助硫化剂对PP/POE热塑性弹性体性能的影响 被引量:3
2
作者 李丽 《塑料工业》 CAS CSCD 北大核心 2015年第4期110-113,共4页
研究了三种不同助硫化剂三羟甲基丙烷三甲基丙烯酸酯(TMPTMA)、三烯丙基异氰脲酸酯(TAIC)、N,N'-间苯撑双马来酰亚胺(HVA-2)对过氧化二异丙苯硫化聚丙烯/茂金属聚烯烃(PP/POE)热塑性弹性体的影响。结果表明,三种助硫化剂均能提高PP/... 研究了三种不同助硫化剂三羟甲基丙烷三甲基丙烯酸酯(TMPTMA)、三烯丙基异氰脲酸酯(TAIC)、N,N'-间苯撑双马来酰亚胺(HVA-2)对过氧化二异丙苯硫化聚丙烯/茂金属聚烯烃(PP/POE)热塑性弹性体的影响。结果表明,三种助硫化剂均能提高PP/POE的交联程度,同样添加量的助硫化剂对定伸应力、拉伸强度的提高影响为:TAIC>HVA-2>TMPTMA,对断裂伸长率、撕裂强度、压缩永久变形的影响为:TMPTMA>HVA-2>TAIC。 展开更多
关键词 助硫化剂 交联程度 物理机械性能 微观结构
下载PDF
助硫化剂对乙丙橡胶性能的影响 被引量:1
3
作者 刘东 刘涛 杜爱华 《特种橡胶制品》 2016年第2期10-13,共4页
研究了采用过氧化物硫化时乙二醇二甲基丙烯酸酯(EDMA)、三烯丙基异氰脲酸酯(TAIC)和硫黄等对EPDM性能的影响。结果表明,加入助硫化剂能明显加快硫化速度,并提高硫化程度;加入TAIC的胶料硫化速度明显快于加入EDMA的胶料;使用少量S代替部... 研究了采用过氧化物硫化时乙二醇二甲基丙烯酸酯(EDMA)、三烯丙基异氰脲酸酯(TAIC)和硫黄等对EPDM性能的影响。结果表明,加入助硫化剂能明显加快硫化速度,并提高硫化程度;加入TAIC的胶料硫化速度明显快于加入EDMA的胶料;使用少量S代替部分TAIC或部分EDMA时胶料的硫化速度明显变慢;助硫化剂种类对硫化胶拉伸强度无明显影响;加入S可使硫化胶拉断伸长率和撕裂强度明显变大;加入TAIC的硫化胶耐屈挠疲劳性能明显好于加入EDMA的硫化胶,同时加入少量S后效果更加明显。TAIC和EDMA用作助硫化剂时,2者硫化胶的耐热氧老化性能均优异;加入少量S后耐热氧老化性能急剧下降。 展开更多
关键词 乙丙橡胶 助硫化剂 耐热性能 耐屈挠疲劳性能
下载PDF
增塑剂与助硫化剂对丁腈橡胶的协同作用 被引量:4
4
作者 孟唯 刘浩 +2 位作者 武文斌 张舒雅 王重 《合成橡胶工业》 CAS 北大核心 2019年第1期41-46,共6页
在三甘醇二异辛酸酯增塑剂存在下,以硫黄和过氧化二异丙苯为主硫化剂、N,N'-间苯撑双马来酰亚胺(HVA-2)或三羟甲基丙烷三甲基丙烯酸酯(TMPTMA)为助硫化剂对丁腈橡胶(NBR)进行硫化,考察了HVA-2或TMPTMA用量对NBR的硫化特性、力学性... 在三甘醇二异辛酸酯增塑剂存在下,以硫黄和过氧化二异丙苯为主硫化剂、N,N'-间苯撑双马来酰亚胺(HVA-2)或三羟甲基丙烷三甲基丙烯酸酯(TMPTMA)为助硫化剂对丁腈橡胶(NBR)进行硫化,考察了HVA-2或TMPTMA用量对NBR的硫化特性、力学性能、耐油和耐磨性能、耐老化性能以及动态力学性能等的影响。结果表明,随着助硫化剂用量的增加,NBR的拉伸强度和硬度增大,压缩永久变形减小,耐油和耐磨性增强;而对玻璃化转变温度及耐老化性能的影响不大,但可降低胶料的生热和Payne效应,进而改善炭黑在NBR中的分散状况。当三甘醇二异辛酸酯用量为20份(质量,下同)、HVA-2或TMPTMA为1. 5份时NBR硫化胶的综合性能最佳。 展开更多
关键词 丁腈橡胶 三甘醇二异辛酸酯 助硫化剂 协同作用 力学性能 耐老化性能
下载PDF
不同硫化体系对丁腈橡胶硫化速率及硫化行为的影响 被引量:5
5
作者 张彩霞 李彦辉 潘广勤 《合成橡胶工业》 CAS 北大核心 2021年第3期225-229,共5页
分别研究了硫黄硫化体系、过氧化物硫化体系及过氧化物/助硫化剂复合硫化体系对丁腈橡胶(NBR)硫化特性和物理机械性能的影响。结果表明,在硫黄硫化体系中,相比于普通硫化(CV)体系,高促低硫配合模式的有效硫化体系有利于提高NBR的硫化速... 分别研究了硫黄硫化体系、过氧化物硫化体系及过氧化物/助硫化剂复合硫化体系对丁腈橡胶(NBR)硫化特性和物理机械性能的影响。结果表明,在硫黄硫化体系中,相比于普通硫化(CV)体系,高促低硫配合模式的有效硫化体系有利于提高NBR的硫化速率,正硫化时间缩短了63 s。在CV体系下,NBR硫化胶的力学性能最佳,拉伸强度较无硫配合方式的有效硫化体系增加了17.2%,扯断伸长率减小了35.3%。相对于硫黄硫化体系,过氧化物硫化体系可显著提高NBR的硫化速率。在过氧化二异丙苯(DCP)硫化体系中,NBR的硫化速率和物理机械性能与DCP用量成正比关系,当DCP用量为4.5份(质量)时,NBR硫化胶的硫化速率和物理机械性能皆最优。当以1,1-二叔丁基过氧基-3,3,5-三甲基环己烷作为硫化剂时,其对硫化速率提高的效果优于DCP,正硫化时间较DCP缩短40 s;在过氧化物/助硫化剂复合硫化体系中,助硫化剂N,N′-间苯撑双马来酰亚胺(HVA-2)和三羟甲基丙烷三甲基丙烯酸酯(TMPTMA)均可提高NBR硫化胶的硫化特性,其中TMPTMA提高NBR硫化胶硫化性能的效果更佳,其正硫化时间比HVA-2缩短20 s。 展开更多
关键词 丁腈橡胶 硫黄 过氧化物 硫化体系 助硫化剂 硫化行为 硫化速率
下载PDF
Surfactant-assisted hydrothermally synthesized MoS_2 samples with controllable morphologies and structures for anthracene hydrogenation 被引量:9
6
作者 李敏 王冬娥 +5 位作者 李佳鹤 潘振栋 马怀军 姜玉霞 田志坚 陆安慧 《Chinese Journal of Catalysis》 SCIE EI CAS CSCD 北大核心 2017年第3期597-606,共10页
MoS_2 samples with controllable morphologies and structures were synthesized using surfactantassisted hydrothermal processes.The effects of surfactants(PEG,PVP,P123,SDS,AOT,and CTAB)on the morphologies and structure... MoS_2 samples with controllable morphologies and structures were synthesized using surfactantassisted hydrothermal processes.The effects of surfactants(PEG,PVP,P123,SDS,AOT,and CTAB)on the morphologies and structures of MoS_2 samples were investigated.The results revealed that spherical,bulk-like,and flower-like MoS_2 particles assembled by NH4~+-intercalated MoS_2 nano-sheets were synthesized.The morphologies of the MoS_2 samples and their structures(including the slab length and the number of stacked layers) of MoS_2 nano-sheets in these samples could be controlled by adjusting the surfactants.Mono-dispersed spherical MoS_2 particles could be synthesized with PEG via the creation of MoS_2 nano-sheets with slab lengths shorter than 15 nm and fewer than six stacked layers.Possible formation mechanisms of these MoS_2 samples created via surfactant-assisted hydrothermal processes are proposed.Further,the catalytic activities of MoS_2 samples for anthracene hydrogenation were evaluated in a slurry-bed reactor.The catalyst synthesized with the surfactant PEG exhibited the highest catalytic hydrogenation activity.Compared with the other catalysts,it had a smaller particle size,mono-dispersed spherical morphology,shorter slab length,and fewer stacked layers;these were all beneficial to exposing its active edges.This work provides an efficient approach to synthesize transition metal sulfides with controllable morphologies and structures. 展开更多
关键词 Molybdenum sulfide Surfactant-assisted Controllable morphology Mono-dispersed Active edges Anthracene hydrogenation
下载PDF
氢化丁腈橡胶耐热配方的优选研究 被引量:1
7
作者 赵欣欣 胡艳华 金耀程 《特种橡胶制品》 2021年第2期23-25,33,共4页
研究了硫化剂DCP用量、助硫化剂TAIC用量和耐热助剂种类及用量对氢化丁腈橡胶耐热空气老化性能的影响。结果表明,当硫化剂DCP用量为4.5份、助硫化剂TAIC用量为3份并加入15份甲基丙烯酸镁时,氢化丁腈橡胶耐热空气老化性能最佳;175℃×... 研究了硫化剂DCP用量、助硫化剂TAIC用量和耐热助剂种类及用量对氢化丁腈橡胶耐热空气老化性能的影响。结果表明,当硫化剂DCP用量为4.5份、助硫化剂TAIC用量为3份并加入15份甲基丙烯酸镁时,氢化丁腈橡胶耐热空气老化性能最佳;175℃×96 h热空气老化后,氢化丁腈橡胶拉伸强度变化率仅为-2.0%,拉断伸长率变化率仅为-42.6%。 展开更多
关键词 氢化丁腈橡胶 助硫化剂 耐热 热空气老化
下载PDF
Microwave-assisted hydroxylation of benzene to phenol with H_2O_2 over FeSO_4/SiO_2 被引量:4
8
作者 LIU Tong WEI Xianyong +3 位作者 ZHAO Jianjun XIE Hengsen WANG Taotao ZONG Zhimin 《Mining Science and Technology》 EI CAS 2010年第1期93-96,共4页
Hydroxyl radicals HO are generated under Fenton-like (Fe2++H2O2→HO?+OH?+Fe3+) catalytic conditions upon microwave irradiation. Liquid-phase direct catalytic oxidation of benzene to phenol was obtained using FeSO4 sup... Hydroxyl radicals HO are generated under Fenton-like (Fe2++H2O2→HO?+OH?+Fe3+) catalytic conditions upon microwave irradiation. Liquid-phase direct catalytic oxidation of benzene to phenol was obtained using FeSO4 supported on silica gel as a solid catalyst and hydrogen peroxide as the oxidant. The effects of various parameters, such as the different solvents, the amount of solvent used, the amount of catalyst used, the reaction time, the reaction temperature and the amount of hydrogen peroxide used on the yield of phenol were studied to identify optimum reaction conditions. Conventionally heated reaction gives a phenol yield of 0.6%. A higher phenol yield of 13.9% with a selectivity of 100% is obtained when the reaction mixture was irradiated with micro-wave energy. It is concluded that microwave irradiation offers more effective control of energy input for hydroxyl radical generation that is appropriate for various synthetic reactions. 展开更多
关键词 hydroxyl radicals Fenton catalytic conditions microwave energy
下载PDF
Chemically exfoliated metallic MoS2 nanosheets: A promising supporting co-catalyst for enhancing the photocatalytic performance of TiO2 nanocrystals 被引量:18
9
作者 Song Bai Limin Wang Xiaoyi Chen Junteng Du Yujie Xiong 《Nano Research》 SCIE EI CAS CSCD 2015年第1期175-183,共9页
Electron-hole separation is a critical step to achieving efficient photocatalysis, towards which use of co-catalysts has become a widely used strategy. Despite the tremendous efforts and demonstrated functions of nobl... Electron-hole separation is a critical step to achieving efficient photocatalysis, towards which use of co-catalysts has become a widely used strategy. Despite the tremendous efforts and demonstrated functions of noble metal co-catalysts, seeking noble metal-free co-catalysts will always be the goal when designing cost- effective, high-performance hybrid photocatalysts. In this work, we demonstrate that MoS~ nanosheets with 1T phase (i.e., octahedral phase) can function as a co-catalyst with multiple merits: (1) Noble-metal-free; (2) high mobility for charge transport; (3) high density of active sites for H2 evolution on basal planes; (4) good performance stability; (5) high light transparency. As demonstrated in both photocatalytic hydrogen production and Rhodamine B degradation, the developed hybrid structure with TiO2 exhibits excellent performance, in sharp contrast to bare TiO2 and the hybrid counterpart with 2H-MoS2. 展开更多
关键词 MOS2 photocatalysis CO-CATALYST METALLIC two-dimensional
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部