Although carbon coating can improve the cycle life of anode for alkaline Zn batteries, the specific capacity reported is still lower compared with nanosized ZnO. Herein, carbon-coated nanosized ZnO(nano-ZnO@C) was syn...Although carbon coating can improve the cycle life of anode for alkaline Zn batteries, the specific capacity reported is still lower compared with nanosized ZnO. Herein, carbon-coated nanosized ZnO(nano-ZnO@C) was synthesized by one-step heat treatment from a gel precursor in N2. Commercial ZnO and homemade ZnO prepared similarly in air atmosphere were studied for comparison. Structure analysis displayed that both nano-ZnO@C and homemade ZnO had a porous hierarchical agglomerated architecture produced from primary nanoparticles with a diameter of approximately 100 nm as building blocks. Electrochemical performance measurements showed that nano-ZnO@C displayed the highest electrochemical activity, the lowest electrode resistance, the highest discharge capacity(622 m A·h/g), and the best cyclic stability. These properties were due to the combination of nanosized ZnO and the physical capping of carbon, which maintained the high utilization efficiency of nano-ZnO, and simultaneously prevented dendrite growth and densification of the anode.展开更多
Pristine LiNi0.5Mnl.5O4 and FePO4-coated one with Fd-3m space groups were prepared by a sol-gel method. The structure and performance were studied by X-ray diffraction （XRD） rietveld refinement, scanning electron mi...Pristine LiNi0.5Mnl.5O4 and FePO4-coated one with Fd-3m space groups were prepared by a sol-gel method. The structure and performance were studied by X-ray diffraction （XRD） rietveld refinement, scanning electron microscopy （SEM）, high resolution transmission electron microscopy （HRTEM）, energy dispersive spectrometer （EDS） mapping, electrochemical impedance spectroscopy （EIS） and charge- discharge tests, respectively. The lattice parameters of all samples almost remain the same from the Rietveld refinement, revealing that the crystallographic structure has no obvious difference between pris- tine LiNi0.5Mn1.5O4 and FePO4-coated one. All materials show similar morphologies with uniform particle distribution with small particle size, and FePO4 coating does not affect the morphology of LiNi0.5Mnl05O 4 material. EDS mapping and HRTEM show that FePO4 may be successfully wrapped around the surfaces of LiNio.sMnl.s04 particles, and provides an effective coating layer between the electrolyte and the surface of LiNi0.5Mn1.5O4 particles. FePO4 （1 wt%）-coated LiNio.sMnl.504 cathode shows the highest discharge capac- ity at high rate （2 C） among all samples. After 80 cycles, the reversible discharge capacity of FePO4 （1 wt%） coated LiNi0.5Mn0.5O4 is 117 mAh g^-1, but the pristine one only has 50 mAh g^-1. FeP04 coating is an effec- tive and controllable way to stabilize the LiNi0.5Mn1.5O4/electrolyte interface, and avoids the direct con- tact between LiNi0.5Mn1.5O4 powders and electrolyte, then suppresses the side reactions and enhances the electrochemical performance of the LiNi0.5Mn1.5O4.展开更多
基金Project(51674301) supported by the National Natural Science Foundation of China
文摘Although carbon coating can improve the cycle life of anode for alkaline Zn batteries, the specific capacity reported is still lower compared with nanosized ZnO. Herein, carbon-coated nanosized ZnO(nano-ZnO@C) was synthesized by one-step heat treatment from a gel precursor in N2. Commercial ZnO and homemade ZnO prepared similarly in air atmosphere were studied for comparison. Structure analysis displayed that both nano-ZnO@C and homemade ZnO had a porous hierarchical agglomerated architecture produced from primary nanoparticles with a diameter of approximately 100 nm as building blocks. Electrochemical performance measurements showed that nano-ZnO@C displayed the highest electrochemical activity, the lowest electrode resistance, the highest discharge capacity(622 m A·h/g), and the best cyclic stability. These properties were due to the combination of nanosized ZnO and the physical capping of carbon, which maintained the high utilization efficiency of nano-ZnO, and simultaneously prevented dendrite growth and densification of the anode.
基金supported by the National Natural Science Foundation of China(51404002)Anhui Provincial Natural Science Foundation(1508085MB25)+1 种基金Natural Science Foundation of Guangdong Province(2016A030310127)Anhui Provincial Science Fund for Excellent Young Scholars(gxyqZD2016066)
文摘Pristine LiNi0.5Mnl.5O4 and FePO4-coated one with Fd-3m space groups were prepared by a sol-gel method. The structure and performance were studied by X-ray diffraction （XRD） rietveld refinement, scanning electron microscopy （SEM）, high resolution transmission electron microscopy （HRTEM）, energy dispersive spectrometer （EDS） mapping, electrochemical impedance spectroscopy （EIS） and charge- discharge tests, respectively. The lattice parameters of all samples almost remain the same from the Rietveld refinement, revealing that the crystallographic structure has no obvious difference between pris- tine LiNi0.5Mn1.5O4 and FePO4-coated one. All materials show similar morphologies with uniform particle distribution with small particle size, and FePO4 coating does not affect the morphology of LiNi0.5Mnl05O 4 material. EDS mapping and HRTEM show that FePO4 may be successfully wrapped around the surfaces of LiNio.sMnl.s04 particles, and provides an effective coating layer between the electrolyte and the surface of LiNi0.5Mn1.5O4 particles. FePO4 （1 wt%）-coated LiNio.sMnl.504 cathode shows the highest discharge capac- ity at high rate （2 C） among all samples. After 80 cycles, the reversible discharge capacity of FePO4 （1 wt%） coated LiNi0.5Mn0.5O4 is 117 mAh g^-1, but the pristine one only has 50 mAh g^-1. FeP04 coating is an effec- tive and controllable way to stabilize the LiNi0.5Mn1.5O4/electrolyte interface, and avoids the direct con- tact between LiNi0.5Mn1.5O4 powders and electrolyte, then suppresses the side reactions and enhances the electrochemical performance of the LiNi0.5Mn1.5O4.
