Li3V2（PO4）3 precursor was obtained with V2Os.nH2O , LiOH＇H2O, NH4H2PO4 and sucrose as starting materials by grinding-sol-gel method, and then the monoclinic-typed Li3Vz（PO4）3 cathode material was prepared by sint...Li3V2（PO4）3 precursor was obtained with V2Os.nH2O , LiOH＇H2O, NH4H2PO4 and sucrose as starting materials by grinding-sol-gel method, and then the monoclinic-typed Li3Vz（PO4）3 cathode material was prepared by sintering the amorphous Li3V2（PO4）3. The as-sintered samples were investigated by X-ray diffraction （XRD）, transmission electron microscopy （TEM）, N2 adsorption-desorption and electrochemical measurement. It is found that Li3Vz（PO4）3 sintered at 700 ℃ possesses good wormhole-like mesoporous structure with the largest specific surface area of 188 cmZ/g, and the smallest pore size of 9.3 nm. Electrochemical test reveals that the initial discharge capacity of the 700 ℃ sintered sample is 155.9 mA.h/g at the rate of 0.2C, and the capacity retains 154 mA.h/g after 50 cycles, exhibiting a stable discharge capacity at room temperature.展开更多
The LiMnPO4/C composite material was synthesized via a sol-gel method based on the citric acid. The X-ray diffraction （XRD）, scanning electron microscopy （SEM） and electrochemical performance tests were adopted to...The LiMnPO4/C composite material was synthesized via a sol-gel method based on the citric acid. The X-ray diffraction （XRD）, scanning electron microscopy （SEM） and electrochemical performance tests were adopted to characterize the properties of LiMnPO4/C. The XRD studies show that the pure olivine phase LiMnPO4 can be obtained at a low temperature of 500 °C. The SEM analyses illustrate that the citric acid used as the chelating reagent and carbon source can restrain the particle size of LiMnPO4/C well. The LiMnPO4/C sample synthesized at 500 °C for 10 h performs the highest initial discharge capacity of 122.6 mA-h/g, retaining 112.4 mA-h/g over 30 cycles at 0.05C rate. The citric acid based sol-gel method is favor to obtain the high electrochemical performance of LiMnPO4/C.展开更多
Zn-doped TiO2 (Zn?TiO2) thin films were prepared by the sol?gel method on titanium substrates with heat treatment at different temperatures. The effects of heat treatment temperatures and Zn doping on the structure, p...Zn-doped TiO2 (Zn?TiO2) thin films were prepared by the sol?gel method on titanium substrates with heat treatment at different temperatures. The effects of heat treatment temperatures and Zn doping on the structure, photocathodic protection and photoelectrochemical properties of TiO2 thin films were investigated. It is indicated that the photoelectrical performance of the Zn?TiO2 films is enhanced with the addition of Zn element compared with the pure-TiO2 film and the largest decline by 897 mV in the electrode potential is achieved under 300 °C heat treatment. SEM?EDS analyses show that Zn element is unevenly distributed in Zn?TiO2 films; XRD patterns reveal that the grain size of Zn?TiO2 is smaller than that of pure-TiO2; FTIR results indicate that Zn - O bond forms on Zn?TiO2 surface. Ultraviolet visible absorption spectra prove that Zn?TiO2 shifts to visible light region.Mott?Shottky curves show that the flat-band potential of Zn?TiO2 is more negative and charge carrier density is bigger than that ofpure-TiO2, implying that under the synergy of the width of the space-charge layer, carrier density and flat-band potential, Zn?TiO2 with 300 °C heat treatment displays the best photocathodic protection performance.展开更多
P2-type Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2) was synthesized by a facile sol−gel method,and the effect of calcination temperature on the structure,morphology and electrochemical performance of samples was investigated.The re...P2-type Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2) was synthesized by a facile sol−gel method,and the effect of calcination temperature on the structure,morphology and electrochemical performance of samples was investigated.The results show that the sample obtained at 900℃ is pure P2-type Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2) phase with good crystallization,which consists of hexagon plate-shaped particles with the size and thickness of 2−4μm and 200−400 nm,respectively.The sample exhibits an initial specific discharge capacity of 243 mA·h/g at a current density of 26 mA/g with good cycling stability.The high specific capacity indicates that P2-type Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2) is a promising cathode material for sodiumion batteries.展开更多
By using metal nitrates as starting materials and citric acid as a complexing agent, Y2Si207：Re3＋ （Re=Eu, Tb） phosphors were prepared by a sol-gel method. X-ray diffraction was employed to characterize the resulti...By using metal nitrates as starting materials and citric acid as a complexing agent, Y2Si207：Re3＋ （Re=Eu, Tb） phosphors were prepared by a sol-gel method. X-ray diffraction was employed to characterize the resulting samples. The results of XRD indicate that the α-Y2Si2O7 nanocrystal with size of 27 nm is obtained at 1000 ℃ and the doping ion content does not influence the structure. The excitation spectra in the UV and VUV ranges and the emission spectra of Re^3＋ doped samples were measured. The excitation spectra in the VUV range is due to absorption of host, that in the UV range is ascribed to absorption transitions from 4f to 5d state of the Tb^3＋ and the charge transfer in the En^3＋-O^2- bond. The spectral energy distribution of the Tb^3＋ emission depends strongly on the Tb3＋ concentration. The dependence of photolumineseenee intensity on Re^3＋ concentration is also discussed in detail. The fluorescent decay curves at room temperature were measured and analyzed.展开更多
A LiFePO4/（C＋Fe2P） composite cathode material was prepared by a sol-gel method using Fe（NO3）3.9H20, LiAc·H2O）, NHaH2PO4 and citric acid as raw materials, and the physical properties and electrochemical perf...A LiFePO4/（C＋Fe2P） composite cathode material was prepared by a sol-gel method using Fe（NO3）3.9H20, LiAc·H2O）, NHaH2PO4 and citric acid as raw materials, and the physical properties and electrochemical performance of the composite cathode material were investigated by X-ray diffractometry （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM） and electrochemical tests. The Fe2P content, morphology and electrochemical performance of LiFePOa/（C＋Fe2P） composite depend on the calcination temperature. The optimized LiFePO4/（C＋FeeP） composite is prepared at 650 ~C and the optimized composite exhibits sphere-like morphology with porous structure and Fe2P content of about 3.2% （mass fraction）. The discharge capacity of the optimized LiFePO4/（C＋FeRP） at 0.1C is 156 and 161 mA.h/g at 25 and 55 ℃, respectively, and the corresponding capacity retentions are 96% after 30 cycles; while the capacity at 1C is 142 and 149 mA.h/g at 25 and 55 ℃, respectively, and the capacity still remains 135 and 142 mA-h/g after 30 cycles at 25 and 55℃, respectively.展开更多
Li3V2（PO4）3 samples were synthesized by sol-gel route and high temperature solid-state reaction. The influence of Li3V2（PO4）3 as cathode materials for lithium-ion batteries on electrochemical performances was inve...Li3V2（PO4）3 samples were synthesized by sol-gel route and high temperature solid-state reaction. The influence of Li3V2（PO4）3 as cathode materials for lithium-ion batteries on electrochemical performances was investigated. The structure of Li3Va（PO4）3 as cathode materials for lithium-ion batteries and morphology of Li3V2（PO4）3 were characterized by X-ray diffractometry （XRD） and scanning electron microscopy （SEM）. Electrochemical performances were characterized by charge/discharge and AC impedance measurements. Li3V2（PO4）3 with smaller grain size shows better performances in terms of the discharge capacity and cycle stability. The improved electrochemical properties of Li3V2（PO4）3 are attributed to the refined grains and enhanced electrical conductivity. AC impedance measurements also show that the Li3V2（PO4）3 synthesized by sol-gel route exhibits significantly decreased charge-transfer resistance and shortened migration distance of lithium ions.展开更多
基金Project (51162026) supported by the National Natural Science Foundation of ChinaProjects (20100480949, 201104509) supported by China Postdoctoral Science FoundationProject (133274341015501) supported by Postdoctoral Science Foundation of Central South University, China
文摘Li3V2（PO4）3 precursor was obtained with V2Os.nH2O , LiOH＇H2O, NH4H2PO4 and sucrose as starting materials by grinding-sol-gel method, and then the monoclinic-typed Li3Vz（PO4）3 cathode material was prepared by sintering the amorphous Li3V2（PO4）3. The as-sintered samples were investigated by X-ray diffraction （XRD）, transmission electron microscopy （TEM）, N2 adsorption-desorption and electrochemical measurement. It is found that Li3Vz（PO4）3 sintered at 700 ℃ possesses good wormhole-like mesoporous structure with the largest specific surface area of 188 cmZ/g, and the smallest pore size of 9.3 nm. Electrochemical test reveals that the initial discharge capacity of the 700 ℃ sintered sample is 155.9 mA.h/g at the rate of 0.2C, and the capacity retains 154 mA.h/g after 50 cycles, exhibiting a stable discharge capacity at room temperature.
基金Project (0991025) supported by Natural Science Foundation of Guangxi, ChinaProject (51164007) supported by the National Natural Science Foundation of ChinaProject (201101ZD008) supported by Educational Commission of Guangxi, China
文摘The LiMnPO4/C composite material was synthesized via a sol-gel method based on the citric acid. The X-ray diffraction （XRD）, scanning electron microscopy （SEM） and electrochemical performance tests were adopted to characterize the properties of LiMnPO4/C. The XRD studies show that the pure olivine phase LiMnPO4 can be obtained at a low temperature of 500 °C. The SEM analyses illustrate that the citric acid used as the chelating reagent and carbon source can restrain the particle size of LiMnPO4/C well. The LiMnPO4/C sample synthesized at 500 °C for 10 h performs the highest initial discharge capacity of 122.6 mA-h/g, retaining 112.4 mA-h/g over 30 cycles at 0.05C rate. The citric acid based sol-gel method is favor to obtain the high electrochemical performance of LiMnPO4/C.
基金Project(cstc2011jj A50008)supported by the Natural Science Foundation of Chongqing,ChinaProject(14ZB0025)supported by Education Department of Sichuan Province,China
文摘Zn-doped TiO2 (Zn?TiO2) thin films were prepared by the sol?gel method on titanium substrates with heat treatment at different temperatures. The effects of heat treatment temperatures and Zn doping on the structure, photocathodic protection and photoelectrochemical properties of TiO2 thin films were investigated. It is indicated that the photoelectrical performance of the Zn?TiO2 films is enhanced with the addition of Zn element compared with the pure-TiO2 film and the largest decline by 897 mV in the electrode potential is achieved under 300 °C heat treatment. SEM?EDS analyses show that Zn element is unevenly distributed in Zn?TiO2 films; XRD patterns reveal that the grain size of Zn?TiO2 is smaller than that of pure-TiO2; FTIR results indicate that Zn - O bond forms on Zn?TiO2 surface. Ultraviolet visible absorption spectra prove that Zn?TiO2 shifts to visible light region.Mott?Shottky curves show that the flat-band potential of Zn?TiO2 is more negative and charge carrier density is bigger than that ofpure-TiO2, implying that under the synergy of the width of the space-charge layer, carrier density and flat-band potential, Zn?TiO2 with 300 °C heat treatment displays the best photocathodic protection performance.
基金the financial supports from the Natural Science Foundation of Hunan Province,China(No.2020JJ5102)the Scientific Research Fund of Hunan Provincial Education Department,China(No.19A111).
文摘P2-type Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2) was synthesized by a facile sol−gel method,and the effect of calcination temperature on the structure,morphology and electrochemical performance of samples was investigated.The results show that the sample obtained at 900℃ is pure P2-type Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2) phase with good crystallization,which consists of hexagon plate-shaped particles with the size and thickness of 2−4μm and 200−400 nm,respectively.The sample exhibits an initial specific discharge capacity of 243 mA·h/g at a current density of 26 mA/g with good cycling stability.The high specific capacity indicates that P2-type Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2) is a promising cathode material for sodiumion batteries.
文摘By using metal nitrates as starting materials and citric acid as a complexing agent, Y2Si207：Re3＋ （Re=Eu, Tb） phosphors were prepared by a sol-gel method. X-ray diffraction was employed to characterize the resulting samples. The results of XRD indicate that the α-Y2Si2O7 nanocrystal with size of 27 nm is obtained at 1000 ℃ and the doping ion content does not influence the structure. The excitation spectra in the UV and VUV ranges and the emission spectra of Re^3＋ doped samples were measured. The excitation spectra in the VUV range is due to absorption of host, that in the UV range is ascribed to absorption transitions from 4f to 5d state of the Tb^3＋ and the charge transfer in the En^3＋-O^2- bond. The spectral energy distribution of the Tb^3＋ emission depends strongly on the Tb3＋ concentration. The dependence of photolumineseenee intensity on Re^3＋ concentration is also discussed in detail. The fluorescent decay curves at room temperature were measured and analyzed.
基金Project(50571091) supported by the National Natural Science Foundation of ChinaProject(09C947) supported by the Scientific Research Fund of Hunan Provincial Education Department,China
文摘A LiFePO4/（C＋Fe2P） composite cathode material was prepared by a sol-gel method using Fe（NO3）3.9H20, LiAc·H2O）, NHaH2PO4 and citric acid as raw materials, and the physical properties and electrochemical performance of the composite cathode material were investigated by X-ray diffractometry （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM） and electrochemical tests. The Fe2P content, morphology and electrochemical performance of LiFePOa/（C＋Fe2P） composite depend on the calcination temperature. The optimized LiFePO4/（C＋FeeP） composite is prepared at 650 ~C and the optimized composite exhibits sphere-like morphology with porous structure and Fe2P content of about 3.2% （mass fraction）. The discharge capacity of the optimized LiFePO4/（C＋FeRP） at 0.1C is 156 and 161 mA.h/g at 25 and 55 ℃, respectively, and the corresponding capacity retentions are 96% after 30 cycles; while the capacity at 1C is 142 and 149 mA.h/g at 25 and 55 ℃, respectively, and the capacity still remains 135 and 142 mA-h/g after 30 cycles at 25 and 55℃, respectively.
基金Projects(0991025,0842003-5 and 0832259) supported by Natural Science Foundation of Guangxi Province,ChinaProject supported by the Joint Graduate Innovation Talent Cultivation Base of Guangxi Province,ChinaProject(GuiJiaoRen[2007]71) supported by the Research Funds of the Guangxi Key Laboratory of Environmental Engineering,Protection and Assessment Program to Sponsor Teams for Innovation in the Construction of Talent Highlands in Guangxi Institutions of Higher Learning,China
文摘Li3V2（PO4）3 samples were synthesized by sol-gel route and high temperature solid-state reaction. The influence of Li3V2（PO4）3 as cathode materials for lithium-ion batteries on electrochemical performances was investigated. The structure of Li3Va（PO4）3 as cathode materials for lithium-ion batteries and morphology of Li3V2（PO4）3 were characterized by X-ray diffractometry （XRD） and scanning electron microscopy （SEM）. Electrochemical performances were characterized by charge/discharge and AC impedance measurements. Li3V2（PO4）3 with smaller grain size shows better performances in terms of the discharge capacity and cycle stability. The improved electrochemical properties of Li3V2（PO4）3 are attributed to the refined grains and enhanced electrical conductivity. AC impedance measurements also show that the Li3V2（PO4）3 synthesized by sol-gel route exhibits significantly decreased charge-transfer resistance and shortened migration distance of lithium ions.
