Appropriate base oils and homologous additives such as extreme pressure and anti-wear agents,oiliness agents and antioxidants were selected,and experiments testing the compatibility performance between additive,base o...Appropriate base oils and homologous additives such as extreme pressure and anti-wear agents,oiliness agents and antioxidants were selected,and experiments testing the compatibility performance between additive,base oil and other components were carried out to develop the SK and SD series of rolling oils for cold rolling of stainless steel.The developed oils were used in the stainless steel cold rolling lubrication experiments,and were successfully applied in the actual cold rolling operation of stainless steel.Compared with a foreign product,the tribological properties,the thermal oxidation stability,and the rolling lubrication performance of the developed stainless steel cold rolling oils were studied.Test results showed that the tribological properties of the thereby developed rolling oils and the reference one were almost at the same level,and to some extent the performance of rolling was even better than the foreign product,at the same time the stainless steel sheet could retain its well annealed performance.Meanwhile,within a certain range,the lubrication of the rolling oil became better as its viscosity increased at the same level of saponification value,which could provide a lower friction coefficient,so that a higher maximum reduction ratio of the rolled piece through a constant roll gap and a minimum thickness could be secured.Also,similar phenomena appeared as the saponification value increased at a same viscosity level of the rolling oils.展开更多
In this study, groundwater quality and water features of Diyarbakir urban basalt aquifer which contains Baglar, Kayapmar, Sur and Yenisehir residential areas aimed to be determined. At this location, water wells opene...In this study, groundwater quality and water features of Diyarbakir urban basalt aquifer which contains Baglar, Kayapmar, Sur and Yenisehir residential areas aimed to be determined. At this location, water wells opened for drinking water and irrigation water are used in the agricultural field. Therefore, in the study area, which opened in water samples taken from water wells were examined. It was reformed in the field, water samples were taken from the predrilled water wells. Water wells in the same coordinates are determined by Garmin etrex 30 handheld GPS system. Chemical analysis of water samples taken in the laboratory was made. The wells water＇s pH, Electrical Conductivity （EC） and Dissolved Solids （TDS） features were acquired by Portable Hanna HI 98125 pH/EC/TDS/℃ meter device at the field. At this study, basalt aquifer features are considered, and water quality and water chemical properties were determined in Diyarbakir city centre, pH, EC and TDS values of the water samples taken on site and those water chemical analyses were measured in the laboratory. Then, they were modelled by using ARC INFO 10.2.1 GIS programme and geostatistical analyst extension tool. At the end of this process, thematic map of Diyarbakir＇s basalt aquifer pH, EC and TDS were produced.展开更多
We use molecular dynamics (MD) simulations to study the effects of vacancies on tube diameters and interwall spacings of multi-walled carbon nanotubes (MWCNTs). Two types of vacancies, double vacancy and three danglin...We use molecular dynamics (MD) simulations to study the effects of vacancies on tube diameters and interwall spacings of multi-walled carbon nanotubes (MWCNTs). Two types of vacancies, double vacancy and three dangling-bond (3DB) single vacancy, are identified to have opposite effects on the tube size change, which explains the inconsistency of the experimentally measured interwall spacings of MWCNTs after electron beam irradiation. A theoretical model to quantitatively predict the shrunk structures of the irradiated MWCNTs is further developed. We also discuss the fabrications of prestressed MWCNTs, in which reduced interwall spacings are desired to enhance the overall elastic modulus and strength.展开更多
文摘Appropriate base oils and homologous additives such as extreme pressure and anti-wear agents,oiliness agents and antioxidants were selected,and experiments testing the compatibility performance between additive,base oil and other components were carried out to develop the SK and SD series of rolling oils for cold rolling of stainless steel.The developed oils were used in the stainless steel cold rolling lubrication experiments,and were successfully applied in the actual cold rolling operation of stainless steel.Compared with a foreign product,the tribological properties,the thermal oxidation stability,and the rolling lubrication performance of the developed stainless steel cold rolling oils were studied.Test results showed that the tribological properties of the thereby developed rolling oils and the reference one were almost at the same level,and to some extent the performance of rolling was even better than the foreign product,at the same time the stainless steel sheet could retain its well annealed performance.Meanwhile,within a certain range,the lubrication of the rolling oil became better as its viscosity increased at the same level of saponification value,which could provide a lower friction coefficient,so that a higher maximum reduction ratio of the rolled piece through a constant roll gap and a minimum thickness could be secured.Also,similar phenomena appeared as the saponification value increased at a same viscosity level of the rolling oils.
文摘In this study, groundwater quality and water features of Diyarbakir urban basalt aquifer which contains Baglar, Kayapmar, Sur and Yenisehir residential areas aimed to be determined. At this location, water wells opened for drinking water and irrigation water are used in the agricultural field. Therefore, in the study area, which opened in water samples taken from water wells were examined. It was reformed in the field, water samples were taken from the predrilled water wells. Water wells in the same coordinates are determined by Garmin etrex 30 handheld GPS system. Chemical analysis of water samples taken in the laboratory was made. The wells water＇s pH, Electrical Conductivity （EC） and Dissolved Solids （TDS） features were acquired by Portable Hanna HI 98125 pH/EC/TDS/℃ meter device at the field. At this study, basalt aquifer features are considered, and water quality and water chemical properties were determined in Diyarbakir city centre, pH, EC and TDS values of the water samples taken on site and those water chemical analyses were measured in the laboratory. Then, they were modelled by using ARC INFO 10.2.1 GIS programme and geostatistical analyst extension tool. At the end of this process, thematic map of Diyarbakir＇s basalt aquifer pH, EC and TDS were produced.
基金Project supported by the National Basic Research Program (973) of China (No 2007CB936803)the National High-Tech R&D Program (863) of China (No 2008AA03Z302)+1 种基金the National Natural Science Foundation of China (No 10832005)the Joint Research Scheme of the National Natural Science Foundation of China and Research Grants Council of Hong Kong (No 50518003)
文摘We use molecular dynamics (MD) simulations to study the effects of vacancies on tube diameters and interwall spacings of multi-walled carbon nanotubes (MWCNTs). Two types of vacancies, double vacancy and three dangling-bond (3DB) single vacancy, are identified to have opposite effects on the tube size change, which explains the inconsistency of the experimentally measured interwall spacings of MWCNTs after electron beam irradiation. A theoretical model to quantitatively predict the shrunk structures of the irradiated MWCNTs is further developed. We also discuss the fabrications of prestressed MWCNTs, in which reduced interwall spacings are desired to enhance the overall elastic modulus and strength.
