我国射线化学合成SiC纤维及相关材料的现状与展望

传统CVD法合成的SiC纤维其最高使用温度仅有900℃,氧化先驱丝法制备的SiC纤维也只能用于1 000℃以下。主要介绍了我国射线化学合成法制备耐高温抗氧化的SiC纤维(使用温度高于1 600℃,单丝抗拉强度达2.2～2.7GPa)的系列关键技术,及其基于这些技术制备圆形截面管状SiC纤维(外径为10～15μm,壁厚2～3μm)的技术;同时也简介了射线化学应用于纳米微孔SiC功能陶瓷以及SiCf/SiC陶瓷基复合材料等方面的研究进展。

结构化学女科学大师——约纳特

约纳特是一位生物大分子结构研究领域的女科学大师，她利用X射线晶体衍射技术研究核糖体的精细结构和功能，同时利用这些知识探索部分抗生素的作用机制，为新抗生素的开发提供了重要的结构支持，由于这些开创性的贡献她分享了2009年诺贝尔化学奖。

Cosmic Ray-driven Bioenergetics for Life in Molecular Clouds

According to models such as panspermia or the Nebula-Relay hypothesis,the ancestors of life on Earth once lived in molecular clouds.Then what are the energy source and bioenergetics for such lifeforms?A new bioenergetic mechanism powered by cosmic ray ionization of hydrogen molecules is proposed and its relation with the origin of chemiosmosis is also discussed in this paper.Based on this mechanism,the Last Universal Common Ancestor may be a type of lifeform that utilizes hydrogen molecules as donors of electron transport chains.

Analysis of electrochemical impedance and XRD spectroscopy for complex self-assembled film on silver

Self-assembled monolayers （SAMs） of （3-mercaptopropy） trimethoxysilane （3-MtrF） chemisorbed on silver surfaces were chemically ＂modified by 1-octadecanethiol to form self-assembled mixed-monolayers （SAMM） and the co-polymer of N-vinylcarbazole and methyl methacrylate ester （to form complex selfassembled film （CSAF））. The oxidation resistance of these barriers on silver surfaces and some influential factors concerned processes were analyzed by electrochemical impedance spectroscopy （EIS） in a 10% NaOH aqueous solution at oxidation potential. X-ray diffraction （XRD） spectroscopy shows that the oxidation occurring on the silver surface may be restrained effectively due to the coating barrier, and CSAF（Ⅱ） is the best one. Studies also reveal that oxide processes of bare silver and a series of modified silver electrodes in a 10% NaOH aqueous solution are of more than two relaxation time constants.

Enhanced Photoelectrochemical Property of Zn Loaded TiO2 Nanotube Arrays Electrode

TiO2 nanotube arrays （TNTs） electrode loaded with Zn nanoparticles was prepared by anodization and the size of Zn nanoparticle loaded on TNTs electrode was controlled by chronoamperometry deposition time. Results of SEM and XRD analysis show that Zn nanoparticles had a diameter of about 15-25 nm when the deposition time was 3-5 s. The UV-Vis diffuse reflectance spectra show the Zn loaded harvest light with 480-780 nm more effectively than the unloaded sample. The photocurrent response of Zn loaded TNTs electrodes were studied, the results showed that TNTs electrodes loaded with Zn nanoparti-cles has 50% increased photocurrent response under high-pressure mercury lamp irradiation compared with unloaded TNTs electrode.

Fabrication and Growth Mechanism of Bamboo-structured Boron Nitride Nanotubes with Thorn-Like Morphology

Bamboo-structured boron nitride （BN） nanotubes with thorn-like morphology were synthe-sized by thermal chemical reaction using amorphous boron powders and NiO nanoparticles as precursors under the flow of NH3 at 1100 oC. The structural and morphological charac-teristics of BN nanotubes were investigated by X-ray diraction and transmission electron microscopy. The results showed that the thorn-like nanostructures attaching to the stems of bamboo-structured BN nanotubes were the hexagonal BN nano akes. Based on the diffu-sion of solid B and vapor B2O2, a possible growth mechanism of these novel thorn-like BN nanotubes was primarily proposed.

Elemental Composition of the Shell of the Testate Amoeba Difflugia tuberspinifera (Sarcodina:Rhizopoda)

X-ray microanalysis was used to study the elemental composition of the shell of the freshwater testate amoeba Difflugia tuberspinifera Hu et al.,1997 collected from Mulan Lake,Hubei province,China in July 2003.The results show that the shell is composed of ten elements:Si in greater quantity;then Ca and Al;and traces of K,Na,Cl,Fe,Mg,S and P.The analysis of results suggests that D.tuberspinifera in elemental composition appears to occupy a middle position between marine and soil testate amoebae.

INTERFACIAL BONDING IN AS DEPOSITED AND ANNEALED Co/C SOFT X RAY MULTILAYER MIRRORS

Interfacial bonding in as deposited and annealed Co/C soft X ray multilayer structures is investigated by X ray photo electron spectroscopy (XPS).It is found that there is interdiffusion between cobalt and carbon in the as deposited Co/C multilayers,and this is confirmed by structure characterization using low angle X ray diffraction (LAXD).The calculation of the chemical shifts in Co C system based on Miedemas macroscopic atom model suggests that it is impossible to detect the chemical shift experimentally in the Co C compound,which is consistent with the XPS results.The presence of metallic carbide bonding is evidenced through the nature of the carbon bonding in survey taken at Co C and C Co interfaces of annealed samples.Our results also indicate that XPS is a direct method to probe the chemical bonding at the interfaces.

Metalorganic Chemical Vapor Deposition of GaNAs Alloy Using Dimethylhydrazine as Nitrogen Precursor

GaNAs alloy is grown by metalorganic chemical vapor deposition (MOCVD) using dimethylhydrazine (DMHy) as the nitrogen precursor.High resolution X ray diffraction (HRXRD) and secondary ion mass spectro metry (SIMS) are combined in determining the nitrogen contents in the samples.Room temperature photoluminescence (RTPL) measurement is also used in characterizing.The influence of different Ga precursors on GaNAs quality is investigated.Samples grown with triethylgallium (TEGa) have better qualities and less impurity contamination than those with trimethylgallium (TMGa).Nitrogen content of 5 688% is achieved with TEGa.The peak wavelength in RTPL measurement is measured to be 1278 5nm.

Effects of Thickness on Properties of ZnO Films Grown on Si by MOCVD

High quality ZnO films are successfully grown on Si（100） substrates by metal-organic chemical vapor deposition at 300℃. The effects of the thickness of the ZnO films on crystal structure, surface morphology,and optical properties are investigated using X-ray diffraction, scanning probe microscopy,and photoluminescence spectra, respectively. It is shown that the ZnO films grown on Si substrates have a highly-preferential C-axis orientation,but it is difficult to obtain the better structural and optical properties of the ZnO films with the increasing of thickness. It is maybe due to that the grain size and the growth model are changed in the growth process.

Electrochemical performance of Ti^(4+)-doped LiFePO_4 synthesized by co-precipitation and post-sintering method

Ti4+-mixed FePO4·xH2O precursor was prepared by co-precipitation method,with which Ti4+ cations were added in the process of preparing FePO4·xH2O to pursue an effective and homogenous doping way.Ti4+-doped LiFePO4 was prepared by an ambient-reduction and post-sintering method using the as-prepared precursor,Li2CO3 and oxalic acid as raw materials.The samples were characterized by scanning electron microscopy (SEM),X-ray diffractometry (XRD),electrochemical impedance spectroscopy (EIS),and electrochemical charge/discharge test.Effects of Ti4+-doping and sintering temperature on the physical and electrochemical performance of LiFePO4 powders were investigated.It is noted that Ti4+-doping can improve the electrochemical performance of LiFePO4 remarkably.The Ti4+-doped sample sintered at 600 ℃ delivers an initial discharge capacity of 150,130 and 125 mA·h/g with 0.1C,1C and 2C rates,respectively,without fading after 40 cycles.

Synthesis of ZSM-5/MOR Co-crystalline Zeolite without Template and the Catalytic Application Thereof

A ZSM-5/MOR co-crystalline zeolite was synthesized without using the template. The physico-chemical properties of the zeolite were characterized by XRD, FT-IR, SEM and TPD and then compared with the co-crystalline zeolite synthesized with a template. Analytical results indicated that they were similar in structure and composition. The influences ofpH value and Si/Al ratio on synthesis were studied. It was found that a high pH value or a low Si/AI ratio could provide better environment for mordenite （MOR） crystallization. The zeolites applied as catalysts in naphtha catalytic cracking for producing ethylene and propylene showed outstanding catalytic performance with the total yield of ethylene and propylene reaching 55 m%. The process could achieve most favorable efficiency when the catalyst contained 5 m% of MOR.

Separation of chalcopyrite and pyrite from a copper tailing by ammonium humate

Copper tailings constitute a large proportion of mine wastes. Some of the copper tailings can be recycled to recover valuable minerals. In this paper, a copper tailing was studied through the chemical analysis method, Xray diffraction and scanning electron microscope-energy dispersive spectrum. It turned out that chalcopyrite(Cu) and pyrite(S) were the main recoverable minerals in the tailing. In order to separate chalcopyrite from pyrite in low pulp pH, ammonium humate(AH) was singled out as the effective regulator. The depression mechanism of AH on the flotation of pyrite was proved by FTIR spectrum and XPS spectrum, demonstrating that there was a chemical adsorption between AH and pyrite. By Response Surface Methodology(RSM), the interaction between AH, pulp pH and iso-butyl ethionine(Z200) was discussed. It was illustrated that the optimal dosage of AH was 1678 g·t^(-1) involving both the recovery of Cu and S. The point prediction by RSM and the closed-circuit flotation displayed that the qualified Cu concentrate and S concentrate could be obtained from the copper tailing.The study indicated that AH was a promising pyrite depressor in the low pulp pH from copper tailings.

Study of Synthesis of Copoly (lactic acid/glycolic acid) by Direct Melt Polycondensation

A two steps direct copolymerisation process was developed. The first step is to produce oligomer and then the oligomer of lactic acid/glycolic acid (90/10) is polymerized with binary catalyst tin chloride dihydrate/p-toluenesulfonic acid. In this way, the direct synthesis of copoly (lactic acid/glycolic acid) without any organic solvent was investigated. The properties and structures of products were characterized by nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), X-ray diffraction and so on. The results show that comparatively high molecular weight copolymer of lactic acid and glycolic acid can be prepared by direct processing under appropriate technological conditions.

Synthesis and thermoelectric properties of Mg_2Si_(1-x)Sn_x solid solutions by microwave irradiation

In order to reduce the oxidizing and volatilizing caused by Mg element in the traditional methods for synthesizing Mg2Sil-xSnx （x=0.2, 0.4, 0.6, 0.8） solid solutions, microwave irradiation techniques were used in preparing them as thermoelectric materials. Structure and phase composition of the obtained materials were investigated by X-ray diffraction （XRD）. The electrical conductivity, Seebeck coefficient and thermal conductivity were measured as a function of temperature from 300 to 750 K. It is found that Mg2Si1-xSnx solid solutions are well formed with excessive content of 5% （molar fraction） Mg from the stoichiometric MgESil.xSnx under microwave irradiation. A maximum dimensionless figure of merit, ZT, of about 0.26 is obtained for Mg2Si1-xSnx solid solutions at about 500 K for x=0.6.

Geochemical analysis of marine sediments using fused glass disc by X-ray fluorescence spectrometry

A method was developed for content determination of Na, Mg, A1, Si, P,S, C1, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Ga, Nb, Zr, Y, Sr, Rb, Ba, La and Ce etc. covering 26 major, minor, and trace elements in marine sediment samples using fused glass disc by X-ray Fluorescence spectrometry. Calibration was made using marine sediment certified reference materials and the synthetic standard samples prepared by mixing several marine sediments with stream sediment and carbonate standard samples in different proportions. The matrix effect was corrected using theoretical alpha coefficients, experience coefficients and the scattered radiation as the internal standard （for the trace elements）. The accuracy of the method was evaluated by analysis of certified reference materials GBW07314, GBW07334 and GSMS6. The results are in good agreement with the certified values of the standards with RSD less than 2.60%, except for Y, Cr, Ga, Ce, La, Nb, Rb, and V with RSD less than 9.0% （n=12）.

Combinatorial Optimization of Ba/Fe-cordierite Solid Solution （Ba0.05Fe0.1Mg）2Al4Si5O18 for High Infrared Radiance Materials

A combinatorial chemistry method was employed to screen the Ba2＋ and Fe3＋ incorporated into cordierite structure （Ba0.05Fe0.1Mg）2A14Si5018 for exploring of high infrared radiance materials. A series of square-type sample array that consists of 7×7 compositions was syn- thesized by ink-jetting nitrate solutions into micro-reactor wells in a ceramic plate and then heat-treated at high temperatures. X-ray diffraction and infrared thermograph were used to analyze the effects of Ba2＋/Fe3＋ incorporating on the lattice distortion of cordierite and resultant changes in infrared radiance properties. Based on the results of X-ray phase analy- sis and radiance measurement of the scale-up prepared samples, the optimal Ba2＋ and Fe3＋ co-adding amount was determined to be 5%Ba2＋ plus 10%Fe3＋. Moreover, the infrared emissivity of the optimal composition at 100 ℃ was found to be higher than 0.8 in a wide wavelength range of 5-24μm. The research work demonstrates a promising application of Ba2＋/Fe3＋ cordierite solid solution as a kind of infrared heating materials for energy saving.

Effects of sodium substitution on properties of LiMn_2O_4 cathode for lithium ion batteries

Na-doped Li1.05Mn2O4 cathodes were synthesized using a sol-gel process.The samples were characterized by X-ray diffractometry(XRD),cyclic voltammetry(CV),electrochemical impedance spectroscopy(EIS)and charge-discharge measurements. The results show that all the samples exhibit the same cubic spinel phase structure without impurity.The lattice constant and unit cell volume decrease with increasing the sodium dopant amount.As the molar ratio of sodium to manganese(x=n(Na)/n(Mn))increases from 0 to 0.03,the initial discharge capacity of the Li1.05Mn2O4 cathodes decreases from 119.2 to 107.9 mA·h/g,and the discharge capability at large current rate and the storage performance decline dramatically,while cycling performance at room temperature and 55℃are improved.The CV and EIS studies indicate that reversibility of Li1.05Mn2O4 cathodes decreases and the electrochemical impedance increases with increasing the sodium dopant amount.

Real-solution stability diagrams for copper-ammonia-chloride-water system

A comprehensive thermodynamic model, which combined the Helgeson Kirkham-Flowers （HKF） equation of state for standard-state thermodynamic properties of all species with realistic activity coefficient model developed by BROMLEY, was used to calculate the thermodynamic equilibrium, and a graphical method was developed to construct predominance existence diagrams （PED） for copper-ammonia-chloride in the presence of realistically modeled aqueous solutions. The existence of the different predominant chemical species for Cu（lI） predicted by the diagrams was corroborated by spectrophotometrical studies and X-ray diffractometry. The simulated and experimental results indicate that the predominance of a given species in solution strongly depends on the pH value in this system. More quantitative information on real copper hydrometallurgy in the presence of ammonia and chloride can be obtained from these diagrams compared with the conventional predominance existence diagrams.