前寒武纪条带状铁建造(banded iron formation,简称BIF)是指全铁含量大于15%,具有硅质条带与铁质条带互层的化学沉积岩(James,1954)。BIF可分为Algoma型及Superior型:前者多产于太古代绿岩带,与海底火山活动密切相关;后者多产于早元古...前寒武纪条带状铁建造(banded iron formation,简称BIF)是指全铁含量大于15%,具有硅质条带与铁质条带互层的化学沉积岩(James,1954)。BIF可分为Algoma型及Superior型:前者多产于太古代绿岩带,与海底火山活动密切相关;后者多产于早元古代克拉通盆地,与沉积作用联系紧密(Gross,1980)。展开更多
Based on the element geochemistry and biomarkers of the oil shale from the Chang 7 sub-unit in the southern Ordos Basin,the depositional conditions and organic source of the oil shale are discussed.Biomarkers analyses...Based on the element geochemistry and biomarkers of the oil shale from the Chang 7 sub-unit in the southern Ordos Basin,the depositional conditions and organic source of the oil shale are discussed.Biomarkers analyses show that the oil shale has a homologous organic matter source,with a mix of plankton and advanced plants.U/Th and V/Ni ratios suggest that the redox condition is dominated by a reducing condition,and the degree of anoxia in the Tongchuan area is higher than that of the Xunyi area.Sr/Ba ratios illustrate that the oil shale is deposited in fresh water and the paleosalinity in the Tongchuan area is slightly higher.Fe/Ti ratios imply that the Tongchuan area underwent obvious hydrothermal fluid activities.Sr/Cu ratios show warm and humid paleoclimate in both areas.As assessed by(La/Yb)NASC,the deposition rate in the Tongchuan area is relatively lower.Fe/Co and Th/U ratios suggest that the paleo-water-depth in the Tongchuan area is deeper.The source rock could have the advance plants source,which must have close relationship with the Qinling orogeny.Comparing the paleoenvironment,the Tongchuan area has better depositional conditions,and is the key oil shale exploration area in the southern Ordos Basin.展开更多
Geochemical, mineralogical, and micromorphologieal characteristics of soils and their relevant parent rocks including loess, ignimbrite, sandstone and limestone were investigated to identify the soil-parent material u...Geochemical, mineralogical, and micromorphologieal characteristics of soils and their relevant parent rocks including loess, ignimbrite, sandstone and limestone were investigated to identify the soil-parent material uniformity and the weathering degree of soils in Golestan Province, northern Iran. Highly developed Caleixerolls and moderately developed Haploxerepts were formed on loess and limestone, respectively. In contrast, the soils formed on ignimbrite and sandstone were non- developed Entisols. Illite was the dominant clay mineral found in ignimbrite and sandstone in both the A horizon and parent material. In loess derived soils however, smectite was dominant especially in the Bt horizon compared to its parent material indicating partly to its pedogenic formation. In limestone, illite and vermiculite were dominant both in the A and C horizons. Ti/Zr ratio proved that the studied soils were closely related to their underlying parent materials geochemically. Chemical index of alteration （CIA）, micromorphological index of soil development （MISECA）, smectite/illite＋chlorite ratio and magnetic susceptibility were applied to investigate the degree of soil development. Results showed that the most and the least developed soils were those formed on loess deposits and limestone,respectively. Application of the different geochemical and pedogenetic approaches was proved to be useful in identifying the relevance of soils to their underlying parent materials and also their degree of development.展开更多
The geochemical characteristics of two sections—the Permian–Triassic boundary(PTB) Guryul Ravine section, Kashmir Valley, Jammu and Kashmir,India; and the Attargoo section, Spiti Valley, Himachal Pradesh, India—hav...The geochemical characteristics of two sections—the Permian–Triassic boundary(PTB) Guryul Ravine section, Kashmir Valley, Jammu and Kashmir,India; and the Attargoo section, Spiti Valley, Himachal Pradesh, India—have been studied in the context of provenance, paleo-weathering, and plate tectonic setting.These sections represent the siliciclastic sedimentary sequence from the Tethys Himalaya. The PTB siliciclastic sedimentary sequence in these regions primarily consists of sandstones and shales with variable thickness. Present studied sandstones and shales of both sections had chemical index of alteration values between 65 and 74; such values reveal low-to-moderate degree of chemical weathering. The chemical index of weathering in studied samples ranged from 71 to 94, suggesting a minor K-metasomatism effect on these samples. Plagioclase index of alteration in studied sections ranged from 68 to 92, indicating a moderate degree of weathering of plagioclase feldspars. The provenance discriminant function diagram suggests that the detritus involved in the formation of present studied siliciclastic sedimentary rocks fall in quartzose sedimentary and felsic igneous provenances. These sediments were deposited in a passive continental margin plate tectonic setting according to their location on a Si_2 O versus K_2O/Na_2 O tectonic setting diagram.展开更多
We studied the geochemical characteristics of illite clay rocks and their importance from the 5hihezi Formation of Late Permian in the Hanxing mining area by means of ICP-M5 and sequential X-ray fluorescence spectrome...We studied the geochemical characteristics of illite clay rocks and their importance from the 5hihezi Formation of Late Permian in the Hanxing mining area by means of ICP-M5 and sequential X-ray fluorescence spectrometry. The results show that the amount of SiO2 is between 53.37% and 61.58% （by weight） and that of Al2O3 22.40% and 31.31% （by weight）. The ratio of SiO2/Al2O3 lies between 1.71 and 2.75. The amount of K2O ranges from 1.11% to 2.56% （by weight）. The amounts of Fe and Ti are higher than the theoretical values in illite clay rock would indicate. The amounts of some trace elements, such as Ga, As, Ba, Cu, Th and U are higher than their Clark values, while that of another 23 trace elements are found to be dose to their Clark values. The amounts of REE range from 22.59 to 570.54 μg/g, with an average of 163.23μg/g. The ratios of LREE/HREE range from 5.41 to 21.82, with an average of 8.87. These characteristics show that LREE are much richer in content than HREE. The REE distribution patterns of our samples were characterized by clearly negative Ce and Eu anomalies. We analyzed the sedimentary environment of the Hanxing mining area in Late Permian by the characteristic element ratio method. The ratios of Mn/Fe range from 0 to 0.0168, which are lower than those in a marine sedimentary environment. The ratios of Sr/Ba （0.20-0.41） are less than 1. These are all indications that the sediments of the Hanxing mining area in Late Permian form largely a continental sedimentary environment. The sedimentary water is freshwater, a conclusion reached on the basis of the ratios of Th/U （2.66-6.62） and of Ca/（Ca ＋ Fe） （0.01-0.059）; the average ratio of Fe2＋/Fe3＋ is 4.8. The sedimentary water condition is weakly acidic and weakly oxidative-weakly reductive, a conclusion reached on the basis of ratios of Fe2＋/Fe3＋ （4.8） and of Ceanom （-0.08）.展开更多
The shape,texture,content and REE characteristics of zircons from the O2tnd-1,O3tnd-2,O3tnd-3pyroclastic rock of Tanjianshan Group on the north margin of Qaidam Basin indicate that the O2-3tndis the product of volcani...The shape,texture,content and REE characteristics of zircons from the O2tnd-1,O3tnd-2,O3tnd-3pyroclastic rock of Tanjianshan Group on the north margin of Qaidam Basin indicate that the O2-3tndis the product of volcanism during the transitional period from ocean-land interim crust to oceanic crust.The U-Pb surface ages obtained from O3tnd-2and O3tnd-3can be divided into 9 groups,every age group coincides with the period when significant tectonic-heat event took place at Oulongbuluke micro-continental base of northern Qaidam,suggesting that the base rocks have provided materials for the formation of sedimentary and volcanic rock in O2-3tnd.The volcanic rocks of O3tnd-3formed at 440 Ma,with time gap 46 Ma to those of O1tna-1and O3tnd-3may represent the minor period that Xitieshan back-arc extension have lasted,the scale of back-arc basin that formed in Xitieshan extension may approach to 1 400 km.Based on the test of ithochemistry data for major elements and analysis of Sr isotope geochemistry for the clastic sedimentary rock in O1tna-2and O3tnd-2,the authors get the conclusion that the O1tna-2and O3tnd-2of Tanjianshan Group may form in back-arc basin environment,while the lithology difference between these two formations may reflect the changes of geodynamic processes as the diagenesis tectonic environment transformed from continental margin depression to adjacent sea basin.展开更多
To determine geochemical indicators for depositional environment favored by terrestrial petroleum source rocks, we selected 40 source rock samples from the Late Cretaceous Qingshankou Formation （Kzqn） and the first ...To determine geochemical indicators for depositional environment favored by terrestrial petroleum source rocks, we selected 40 source rock samples from the Late Cretaceous Qingshankou Formation （Kzqn） and the first member of Nenjiang Formation （K2n1） in the Songliao Basin to qualify saturate fraction and aromatic fraction using GC-HRT （gas chromatography high resolution time-of-flight mass spectrometry） and quantify important biomarkers using GC-MS. The results reveal that source rocks from the 1st member of Qingshankou Formation （K2qn1） are characterized by not only high contents of terpanes, regular steranes and 4-methylsteranes but also high contents of dinosteranes, C31 steranes and aryl isoprenoids. Presence of specific biomarkers like elementary sulfur and lanostanes indicates a depositional environment of lagoon characterized by water stratification and high salinity. In the 2nd-3rd members of Qingshankou Formation （K2qn2＋3）, source rocks contain lower contents of biomarkers, indicating a depositional environment of shallow fresh-water lake delta. Source rocks in the K2n1 contain high contents of terpanes, regular steranes and 4-methylsteranes but lower contents of dinosteranes, C31 steranes and aryl isoprenoids, indicating a depositional environment of fresh-brackish open lake characterized by low salinity and poor water stratification, where organic matter is seriously altered by bacteria. Overall analysis shows that primary geochemical indicators for terrestrial petroleum source rocks are as follows： 1） C30 hopanes 〉 1500 ppm; 2） gammacerane 〉190 ppm; 3） C27 steranes 〉200 ppm; 4） 4-methylsteranes 〉 100 ppm; 5） aryl isoprenoids 〉 3 ppm; 6） dehydroxyl-vitamin E 〉 10 ppm.展开更多
文摘前寒武纪条带状铁建造(banded iron formation,简称BIF)是指全铁含量大于15%,具有硅质条带与铁质条带互层的化学沉积岩(James,1954)。BIF可分为Algoma型及Superior型:前者多产于太古代绿岩带,与海底火山活动密切相关;后者多产于早元古代克拉通盆地,与沉积作用联系紧密(Gross,1980)。
基金Projects(41173055,41772118)supported by the National Natural Science Foundation of China
文摘Based on the element geochemistry and biomarkers of the oil shale from the Chang 7 sub-unit in the southern Ordos Basin,the depositional conditions and organic source of the oil shale are discussed.Biomarkers analyses show that the oil shale has a homologous organic matter source,with a mix of plankton and advanced plants.U/Th and V/Ni ratios suggest that the redox condition is dominated by a reducing condition,and the degree of anoxia in the Tongchuan area is higher than that of the Xunyi area.Sr/Ba ratios illustrate that the oil shale is deposited in fresh water and the paleosalinity in the Tongchuan area is slightly higher.Fe/Ti ratios imply that the Tongchuan area underwent obvious hydrothermal fluid activities.Sr/Cu ratios show warm and humid paleoclimate in both areas.As assessed by(La/Yb)NASC,the deposition rate in the Tongchuan area is relatively lower.Fe/Co and Th/U ratios suggest that the paleo-water-depth in the Tongchuan area is deeper.The source rock could have the advance plants source,which must have close relationship with the Qinling orogeny.Comparing the paleoenvironment,the Tongchuan area has better depositional conditions,and is the key oil shale exploration area in the southern Ordos Basin.
基金Gorgan University of Agricultural Sciences and Natural Resources for the support of this study
文摘Geochemical, mineralogical, and micromorphologieal characteristics of soils and their relevant parent rocks including loess, ignimbrite, sandstone and limestone were investigated to identify the soil-parent material uniformity and the weathering degree of soils in Golestan Province, northern Iran. Highly developed Caleixerolls and moderately developed Haploxerepts were formed on loess and limestone, respectively. In contrast, the soils formed on ignimbrite and sandstone were non- developed Entisols. Illite was the dominant clay mineral found in ignimbrite and sandstone in both the A horizon and parent material. In loess derived soils however, smectite was dominant especially in the Bt horizon compared to its parent material indicating partly to its pedogenic formation. In limestone, illite and vermiculite were dominant both in the A and C horizons. Ti/Zr ratio proved that the studied soils were closely related to their underlying parent materials geochemically. Chemical index of alteration （CIA）, micromorphological index of soil development （MISECA）, smectite/illite＋chlorite ratio and magnetic susceptibility were applied to investigate the degree of soil development. Results showed that the most and the least developed soils were those formed on loess deposits and limestone,respectively. Application of the different geochemical and pedogenetic approaches was proved to be useful in identifying the relevance of soils to their underlying parent materials and also their degree of development.
文摘The geochemical characteristics of two sections—the Permian–Triassic boundary(PTB) Guryul Ravine section, Kashmir Valley, Jammu and Kashmir,India; and the Attargoo section, Spiti Valley, Himachal Pradesh, India—have been studied in the context of provenance, paleo-weathering, and plate tectonic setting.These sections represent the siliciclastic sedimentary sequence from the Tethys Himalaya. The PTB siliciclastic sedimentary sequence in these regions primarily consists of sandstones and shales with variable thickness. Present studied sandstones and shales of both sections had chemical index of alteration values between 65 and 74; such values reveal low-to-moderate degree of chemical weathering. The chemical index of weathering in studied samples ranged from 71 to 94, suggesting a minor K-metasomatism effect on these samples. Plagioclase index of alteration in studied sections ranged from 68 to 92, indicating a moderate degree of weathering of plagioclase feldspars. The provenance discriminant function diagram suggests that the detritus involved in the formation of present studied siliciclastic sedimentary rocks fall in quartzose sedimentary and felsic igneous provenances. These sediments were deposited in a passive continental margin plate tectonic setting according to their location on a Si_2 O versus K_2O/Na_2 O tectonic setting diagram.
基金supported by the National Nature Science Foundation of China (Nos. 41072031 and 40172119)the Natural Science Foundation of Hebei Province,China (No.D2009000833)
文摘We studied the geochemical characteristics of illite clay rocks and their importance from the 5hihezi Formation of Late Permian in the Hanxing mining area by means of ICP-M5 and sequential X-ray fluorescence spectrometry. The results show that the amount of SiO2 is between 53.37% and 61.58% （by weight） and that of Al2O3 22.40% and 31.31% （by weight）. The ratio of SiO2/Al2O3 lies between 1.71 and 2.75. The amount of K2O ranges from 1.11% to 2.56% （by weight）. The amounts of Fe and Ti are higher than the theoretical values in illite clay rock would indicate. The amounts of some trace elements, such as Ga, As, Ba, Cu, Th and U are higher than their Clark values, while that of another 23 trace elements are found to be dose to their Clark values. The amounts of REE range from 22.59 to 570.54 μg/g, with an average of 163.23μg/g. The ratios of LREE/HREE range from 5.41 to 21.82, with an average of 8.87. These characteristics show that LREE are much richer in content than HREE. The REE distribution patterns of our samples were characterized by clearly negative Ce and Eu anomalies. We analyzed the sedimentary environment of the Hanxing mining area in Late Permian by the characteristic element ratio method. The ratios of Mn/Fe range from 0 to 0.0168, which are lower than those in a marine sedimentary environment. The ratios of Sr/Ba （0.20-0.41） are less than 1. These are all indications that the sediments of the Hanxing mining area in Late Permian form largely a continental sedimentary environment. The sedimentary water is freshwater, a conclusion reached on the basis of the ratios of Th/U （2.66-6.62） and of Ca/（Ca ＋ Fe） （0.01-0.059）; the average ratio of Fe2＋/Fe3＋ is 4.8. The sedimentary water condition is weakly acidic and weakly oxidative-weakly reductive, a conclusion reached on the basis of ratios of Fe2＋/Fe3＋ （4.8） and of Ceanom （-0.08）.
基金Supported by the National Natural Science Foundation of China(No.41172087)the Fundamental Research Funds for the Central Universities(No.CUG090102)
文摘The shape,texture,content and REE characteristics of zircons from the O2tnd-1,O3tnd-2,O3tnd-3pyroclastic rock of Tanjianshan Group on the north margin of Qaidam Basin indicate that the O2-3tndis the product of volcanism during the transitional period from ocean-land interim crust to oceanic crust.The U-Pb surface ages obtained from O3tnd-2and O3tnd-3can be divided into 9 groups,every age group coincides with the period when significant tectonic-heat event took place at Oulongbuluke micro-continental base of northern Qaidam,suggesting that the base rocks have provided materials for the formation of sedimentary and volcanic rock in O2-3tnd.The volcanic rocks of O3tnd-3formed at 440 Ma,with time gap 46 Ma to those of O1tna-1and O3tnd-3may represent the minor period that Xitieshan back-arc extension have lasted,the scale of back-arc basin that formed in Xitieshan extension may approach to 1 400 km.Based on the test of ithochemistry data for major elements and analysis of Sr isotope geochemistry for the clastic sedimentary rock in O1tna-2and O3tnd-2,the authors get the conclusion that the O1tna-2and O3tnd-2of Tanjianshan Group may form in back-arc basin environment,while the lithology difference between these two formations may reflect the changes of geodynamic processes as the diagenesis tectonic environment transformed from continental margin depression to adjacent sea basin.
基金supported by Major State Basic Research Development Program of China (Grant No. 2009CB219308) and Petro China Daqing Oilfield Company Ltd.
文摘To determine geochemical indicators for depositional environment favored by terrestrial petroleum source rocks, we selected 40 source rock samples from the Late Cretaceous Qingshankou Formation （Kzqn） and the first member of Nenjiang Formation （K2n1） in the Songliao Basin to qualify saturate fraction and aromatic fraction using GC-HRT （gas chromatography high resolution time-of-flight mass spectrometry） and quantify important biomarkers using GC-MS. The results reveal that source rocks from the 1st member of Qingshankou Formation （K2qn1） are characterized by not only high contents of terpanes, regular steranes and 4-methylsteranes but also high contents of dinosteranes, C31 steranes and aryl isoprenoids. Presence of specific biomarkers like elementary sulfur and lanostanes indicates a depositional environment of lagoon characterized by water stratification and high salinity. In the 2nd-3rd members of Qingshankou Formation （K2qn2＋3）, source rocks contain lower contents of biomarkers, indicating a depositional environment of shallow fresh-water lake delta. Source rocks in the K2n1 contain high contents of terpanes, regular steranes and 4-methylsteranes but lower contents of dinosteranes, C31 steranes and aryl isoprenoids, indicating a depositional environment of fresh-brackish open lake characterized by low salinity and poor water stratification, where organic matter is seriously altered by bacteria. Overall analysis shows that primary geochemical indicators for terrestrial petroleum source rocks are as follows： 1） C30 hopanes 〉 1500 ppm; 2） gammacerane 〉190 ppm; 3） C27 steranes 〉200 ppm; 4） 4-methylsteranes 〉 100 ppm; 5） aryl isoprenoids 〉 3 ppm; 6） dehydroxyl-vitamin E 〉 10 ppm.
