期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Influence of surface etching pretreatment on PEO process of eutectic Al–Si alloy 被引量:1
1
作者 李康 李文芳 +2 位作者 张果戈 王敏 唐鹏 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2015年第9期1572-1578,共7页
To solve the problems generally encountered during the plasma electrolytic oxidation(PEO) of Al alloys with high Si content, a pretreatment of chemical etching was applied before the process. The influence of such pre... To solve the problems generally encountered during the plasma electrolytic oxidation(PEO) of Al alloys with high Si content, a pretreatment of chemical etching was applied before the process. The influence of such pretreatment was studied by SEM, EDS and XRD. The pretreatment presents a significant effect on positive voltage at the beginning stage of PEO, leading to higher voltage over the whole process. The difference between the positive voltages of non-etched and etched specimens decreases gradually with the increase of processing time. The pretreatment exhibits much less influence on the negative voltage. For the sample with surface pretreatment, the average growth rate of PEO coating is increased from 0.50 to 0.84 μm·min-1and the energy consumption is decreased from 6.30 to 4.36 k W·h·μm-1·m-2. At the same time, both mullite and amorphous Si O2 contents are decreased in the coating. 展开更多
关键词 Plasma electrolytic oxidation Eutectic Al–Si alloy Pretreatment Etching
下载PDF
Determination of Effective Degree-Day for Supporting Chemical Control Against Cutworms (Lep. Noctuinae) in the Sugar Beet
2
作者 Magdalena Jakubowska Felicyta Walczak JerzyJ6zefatLipa 《Journal of Agricultural Science and Technology(A)》 2012年第3期314-326,共13页
The aim of the research was to connect two methods of the chemical control. The first chemical treatments were applied according to the signalling method. The second method was applied according to the phonological cr... The aim of the research was to connect two methods of the chemical control. The first chemical treatments were applied according to the signalling method. The second method was applied according to the phonological criterion i.e., on the basis of the values of effective temperatures sums or heat sums for cutworms. The studies on cutworms infesting sugar beet crops were carried out in the years 2005-2008. The observation performed during the moth flights from May to September included two species, turnip moth (Agrotis segetum Den. & Schiff.) and heart-and-dart moth (A. exclamationis L.). The dynamics of moth flights was recorded in reference to readings of climatic conditions registered with the field meteorological stations set up near the light traps. Observations on cutworm occurrence during the vegetation season were done every 5-7 days. Moreover, additional studies were conducted under control conditions in the growth chambers at three programmed temperatures (17°C, 20 °C, 24 °C) and relative humidity (50%-70%). Based on the results the values for the heat sum of 501.1 °C and effective temperatures sum of 230.0 °C were determined for the developmental stages of cutworm. On the base of the results obtained it can be stated that the improved method of short-term forecasting can be an alternative solution in the integrated protection management against pest. 展开更多
关键词 Cutworms monitoring DEGREE-DAY sums of effective temperatures light trap sugar beet (Beta vulgaris L.).
下载PDF
龙须草纳米微晶的制备与表征 被引量:4
3
作者 杨成秀 梁美蓉 +5 位作者 林远雄 林镕纯 陈玉娜 陈永金 王宝玉 李荣 《纸和造纸》 2018年第5期23-28,共6页
用亚氯酸钠和17.5%氢氧化钠对龙须草进行预处理,再以硫酸水解法制备龙须草纳米微晶,采用正交试验优化酸水解条件,并利用场发射扫描电镜、动态光散射、红外光谱、X射线衍射和热重分析对纳米微晶进行表征。研究表明,酸水解条件为硫酸浓度5... 用亚氯酸钠和17.5%氢氧化钠对龙须草进行预处理,再以硫酸水解法制备龙须草纳米微晶,采用正交试验优化酸水解条件,并利用场发射扫描电镜、动态光散射、红外光谱、X射线衍射和热重分析对纳米微晶进行表征。研究表明,酸水解条件为硫酸浓度59%,温度45℃,时间2 h,纳米微晶长度、粒径和长径比分别为171.1 nm,17.2 nm和10.3;纳米微晶的纤维素存在纤维素Ⅰ和纤维素Ⅱ两种晶型,其结晶指数为78%;纳米微晶的热裂解起始温度和最大热重损失温度分别为178℃和224.4℃,700℃热降解的残余率为30.6%。 展开更多
关键词 龙须草 纳米微晶 酸水解 化学法预处理
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部