Electroless Deposition of Nickel Nanowire and Nanotube Arrays as Supports for Pt-Pd Catalyst for Ethanol Electrooxidation

Nickel nanowire and nanotube arrays as supports for Pt-Pd catalyst were prepared by elec- troless deposition with anodic aluminum oxide template. Pt-Pd composite catalyst was de- posited on the arrays by displacement reaction. SEM images show that the nickel nanowires have an average diameter of I00 nm and the nickel nanotubes have an average inner diameter of 200 nm. EDS scanning reveals that elemental Pt and Pd disperse uniformly on the arrays. Cyclic voltammetry study indicates that the nickel nanotube array loaded with Pt-Pd pos- sesses a higher electrochemical activity for ethanol oxidation than the nickel nanowire array with Pt-Pd.

地球能养活多少人口

地球能养活多少人口赵志刚根据联合国人口活动基金组织发表的公报，本世纪之末，世界人口将达到６０亿，２０２０年为８０亿，到２１世纪末会突破１００亿，如此众多的人口，将会给地球带来沉重的负担。从生物量的观点来分析，地球究竟能够养活多少人口？地球上所有生态系...

汽车火灾的预防

在日趋繁忙的社会，汽车火灾也成为人们关注的焦点，稍有不慎将会给生命财产带来损失，我根据驾驶经历中就汽车防火方面，愿和广大驾驶员朋友们交流，以促进预防和自救汽车火灾。引起汽车火灾的因素很多，现在介绍以下几点：

Supported dual-atom catalysts: Preparation, characterization, and potential applications

Developing sustainable and clean electrochemical energy conversion technologies is a crucial step in addressing the challenges of energy shortage and environmental pollution. Exploring and developing new electrocatalysts with excellent performance and low cost will facilitate the commercial use of these energy conversion technologies. Recently, dual-atom catalysts(DACs) have attracted considerable research interest since they exhibit higher metal atom loading and more flexible active sites compared to single-atom catalysts(SACs). In this paper, the latest preparation methods and characterization techniques of DACs are systematically reviewed. The advantages of homonuclear and heteronuclear DACs and the catalytic mechanism and identification technologies between the two DACs are highlighted. The current applications of DACs in the field of electrocatalysis are summarized. The development opportunities and challenges of DACs in the future are prospected. The ultimate goal is to provide new ideas for the preparation of new catalysts with excellent properties by customizing diatomic catalysts for electrochemical applications.

Washing effect on properties of Li Ni_(0.8)Co_(0.15)Al_(0.05)O_2 cathode material by ethanol solvent

Different LiNi0.8Co0.15Al0.05O2 cathode materials were washed by ethanol solvent. Inductively coupled plasma atomic emission spectroscopy（ICP-AES）, Fourier transformed infrared（FTIR） spectrum, X-ray diffraction（XRD）, scanning electron microscopy（SEM）, charge-discharge test and electrochemical impedance spectroscopy（EIS） were used to evaluate the elemental contents, structures, morphologies and electrochemical properties of samples. The results show that ethanol washing can remove effectively the synthetic residues LiOH/Li2 O on the freshly-prepared LiNi0.8Co0.15Al0.05O2 and make the sample much more resistant to H2O and CO2, without destroying its bulk structure, surface morphology and electrochemical performances. Moreover, the discharge specific capacity and cycle performance of LiNi0.8Co0.15Al0.05O2 after storage in air with a relative humidity of 80% for three months are improved by immediate ethanol washing.

Long-Term Frozen Storage Impact on the Antioxidant Capacity and Chemical Composition of Sardinian Myrtle （Myrtus communis L,） Berries

The effects of frozen storage at -18 ℃ up to 6 months, on the antioxidant properties, chemical composition and other physicochemical properties of myrtle berries （Myrtus comrnunis L.） has been evaluated. Berries showed a good resistance to storage decay, and weight loss remained after six months in the 15% range. Results showed that frozen storage up to 6 months affect individual antocyanins content in different ways. Nevertheless the total anthocyanins content was at the end of storage higher than in fresh fruits. The antioxidant capacity calculated with 2,2-diphenyl-l-picrylhidrazyl （DPPH） and 2,2＇-Azino-bis （3-ethylbenzothiazoline-6-sulfonic acid） （ABTS） increased during storage and the calculated r2 showed a positive correlation with the total anthocyanins content. Gluconic and fumaric acid did not changed, quinic acid decreased while malic and shikimic acid increased. The total organic acid content during storage was higher than in fresh fruits causing a slight decrease in pH. Fructose and glucose increased with the same rate and the ratio fructose/glucose remained unchanged （1.06 ± 0.01）, CIE L^＊a^＊b^＊ coordinates showed a shift of the colour to tawny brown after six months storage.

漫谈生物的能源物质

高中《生物》课本中，在讲细胞的化学成分，以及新陈代谢等章节时都提到能源物质，在学习过程中有许多学生对能源物质的认识比较混乱，故将生物的能源物质做一总结，供大家参考。首先，要明白地球上一切生物体进行生命活动所需的能量，几乎全部来自太阳，因此要清楚·根·...

浅谈高中生物的复习方法

高中生物课复习时，教师除了让学生准确地理解和掌握基本概念，切实掌握实验的基本技能外，还要使学生完整地掌握知识的结构体系和知识的内在联系，培养学生灵活应用知识的能力。笔者在复习时，利用图表、投影片，结合例题讲解或进行习题训练，取得了良好效果。现简述如下...

Advances of graphene application in electrode materials for lithium ion batteries

The demands for better energy storage devices due to fast development of electric vehicles(EVs) have raised increasing attention on lithium ion batteries(LIBs) with high power and energy densities. In this paper, we provide an overview of recent progress in graphene-based electrode materials. Graphene with its great electrical conductivity and mechanical properties have apparently improved the performance of traditional electrode materials. The methods and electrochemical properties of advanced graphene composite as cathode and anode for LIBs are reviewed. Two novel kinds of graphene hybrid materials are specially highlighted: three-dimensional porous and flexible binder-free graphene-based materials. Challenges for LIBs and future research trend in the development of high-performance electrode materials are further discussed.

The strategies of advanced cathode composites for lithium-sulfur batteries

Lithium-sulfur batteries have been widely nominated as one of the most promising next-generation electrochemical storage systems due to its low cost, high capacity and energy density. However, its practical application is still hindered by poor cycling lifetime, low Coulombic efficiency, instability and small scales. In the last decade, the electrochemical performances of the lithium-sulfur batteries have been improved by developing various novel nanoarchitectures as qualified hosts, and enhancing the sulfur loading with effective encapsulating strategies. The review summarizes the major sulfur cooperating strategies of cathodes based on background and latest progress of the lithium-sulfur batteries. The novel cooperating strategies of physical techniques and chemical synthesis techniques are discussed in detail. Based on the rich chemistry of sulfur, we paid more attention to the highlights of sulfur encapsulating strategies. Furthermore, the critical research directions in the coming future are proposed in the conclusion and outlook section.

Electrochemical energy storage applications of “pristine” graphene produced by non-oxidative routes

Graphene is a promising material as both active components and additives in electrochemical energy storage devices. The properties of graphene strongly depend on the fabrication methods. The applications of reduced graphene oxide as electrode materials have been well studied and reviewed, but the using of "pristine" graphene as electrode material for energy storage is still a new topic. In this paper, we review state-of-the-art progress in the fabrication of "pristine" graphene by different methods and the electrochemical performance of graphene-based electrodes. The achievements in this area will be summarized and compared with the graphene oxide route in terms of cost, scalability, material properties and performances, and the challenges in these methods will be discussed as well.

Engineering two-dimensional metal oxides and chalcogenides for enhanced electro-and photocatalysis

Two-dimensional(2D)metal oxides and chalcogenides(MOs&MCs)have been regarded as a new class of promising electro-and photocatalysts for many important chemical reactions such as hydrogen evolution reaction,CO_(2) reduction reaction and N2 reduction reaction in virtue of their outstanding physicochemical properties.However,pristine 2D MOs&MCs generally show the relatively poor catalytic performances due to the low electrical conductivity,few active sites and fast charge recombination.Therefore,considerable efforts have been devoted to engineering 2D MOs&MCs by rational structural design and chemical modification to further improve the catalytic activities.Herein,we comprehensively review the recent advances for engineering technologies of 2D MOs&MCs,which are mainly focused on the intercalation,doping,defects creation,facet design and compositing with functional materials.Meanwhile,the relationship between morphological,physicochemical,electronic,and optical properties of 2D MOs&MCs and their electro-and photocatalytic performances is also systematically discussed.Finally,we further give the prospect and challenge of the field and possible future research directions,aiming to inspire more research for achieving high-performance 2D MOs&MCs catalysts in energy storage and conversion fields.

Two-dimensional Ni（OH）2 nanoplates for flexible on-chip m icrosu pe rcapac itors

On-chip microsupercapacitors （MSCs） compatible with on-chip geometries of integrated circuits can be used either as a separate power supply in microelectronic devices or as an energy storage or energy receptor accessory unit. In this work, we report the fabrication of flexible two-dimensional Ni（OH）2 nanoplates-based MSCs, which achieved a specific capacitance of 8.80 F/cm^3 at the scan rates of 100 mV/s, losing only 0.20% of its original value after 10,000 charge/discharge cycles. Besides, the MSCs reached an energy density of 0.59 mWh/cm^3 and a power density up to 1.80 W/cm^3, which is comparable to traditional carbon-based devices. The flexible MSCs exhibited good electrochemical stability when subjected to bending at various conditions, illustrating the promising application as electrodes for wearable energy storage.

Robust metal–organic framework with multiple traps for trace Xe/Kr separation

Direct separation of Xe and Kr from air or used nuclear fuel(UNF)off-gas by means of porous adsorbents is of industrial importance but is a very challenging task.In this work,we show a robust metal-organic framework(MOF),namely ECUT-60,which renders not only high chemical stability,but also unique structure with multiple traps.This leads to the ultrahigh Xe adsorption capacity,exceeding most reported porous materials.Impressively,this MOF also enables high selectivity of Xe over Kr,CO2,O2,and N2,leading to the high-performance separation for trace quantitites of Xe/Kr from a simulated UNF reprocessing off-gas.The separation capability has been demonstrated by using dynamic breakthrough experiments,giving the record Xe uptake up to 70.4 mmol/kg and the production of 19.7 mmol/kg pure Xe.Consequently,ECUT-60 has promising potential in direct production of Xe from UNF off-gas or air.The separation mechanism,as unveiled by theoretical calculation,is attributed to the multiple traps in ECUT-60 that affords rigid restrict for Xe atom via van der Waals force.

The role of soluble sugars during drought in tropical tree seedlings with contrasting tolerances

Aims Non-structural carbohydrates(NSCs)are plant storage compounds used for metabolism,transport,osmoregulation and regrowth following the loss of plant tissue.Even in conditions suitable for optimal growth,plants continue to store NSCs.This storage may be due to passive accumulation from sink-inhibited growth or active reserves that come at the expense of growth.The former pathway implies that NSCs may be a by-product of sink limitation,while the latter suggests a functional role of NSCs for use during poor conditions.Methods Using 13C pulse labelling,we traced the source of soluble sugars in stem and root organs during drought and everwet conditions for seedlings of two tropical tree species that differ in drought tolerance to estimate the relative allocation of NSCs stored prior to drought versus NSCs assimilated during drought.We monitored growth,stomatal conductance,stem water potential and NSC storage to assess a broad carbon response to drought.Important Findings We found that the drought-sensitive species had reduced growth,conserved NSC concentrations in leaf,stem and root organs and had a larger proportion of soluble sugars in stem and root organs that originated from pre-drought storage relative to seedlings in control conditions.In contrast,the drought-tolerant species maintained growth and stem and root NSC concentrations but had reduced leaf NSCs concentrations with a larger proportion of stem and root soluble sugars originated from freshly assimilated photosynthates relative to control seedlings.These results suggest the drought-sensitive species passively accumulated NSCs during water deficit due to growth inhibition,while the drought-tolerant species actively responded to water deficit by allocating NSCs to stem and root organs.These strategies seem correlated with baseline maximum growth rates,which supports previous research suggesting a trade-off between growth and drought tolerance while providing new evidence for the importance of plasticity in NSC allocation during drought.