The aim of this study is to determine the effect of the main chemical components ofbiomass： cellulose, hemicel- lulose and lignin, on chemical kinetics ofbiomass pyrolysis. The experiments were designed based on a si...The aim of this study is to determine the effect of the main chemical components ofbiomass： cellulose, hemicel- lulose and lignin, on chemical kinetics ofbiomass pyrolysis. The experiments were designed based on a simplex- lattice mixture design. The pyrolysis was observed by using a thermogravimetric analyzer. The curves obtained from the employed analytical method fit the experimental data （R2 〉 0.9）. This indicated that this method has the potential to determine the kinetic parameters such as the activation energy （E~）, frequency factor （A） and re- action order （n） for each point of the experimental design. The results obtained from the simplex-lattice mixture design indicated that cellulose had a significant effect on Ea and A, and the interaction between cellulose and lignin had an important effect on the reaction order, n. The proposed models were then proved to be useful for predicting pyrolysis behavior in real biomass and so could be used as a simple approximation for predicting the overall trend of chemical reaction kinetics.展开更多
In this study, a novel bio-based thermosetting system has been developed from epoxy resin （EP）, with rosin-sourced anhydrides （maleopimaric acid, RAM） as curing agent and imidazole type latent catalyst （two amino...In this study, a novel bio-based thermosetting system has been developed from epoxy resin （EP）, with rosin-sourced anhydrides （maleopimaric acid, RAM） as curing agent and imidazole type latent catalyst （two amino imidazole salt complex, IMA）, to be used as matrix for hot-melt prepreg curing at mid-temperature. For comparison, the epoxy resin system with petroleum sourced hardener methylhexahydrophthalicanhydride （MHHPA） was also examined. The curing behaviour and mechanism were investigated by non-isothermal differential scanning calorimeter （DSC） analysis and Fourier transform infrared （FTIR） spectra. The results showed that the curing course of bio-based epoxy resin system containing RAM included two stages, which were the reaction between the free carboxyl group of RAM and oxirane ring under the acceleration of IMA, and the main reaction attributed to the reaction between anhydride and oxirane. According to Kissinger method, the reaction activation energy （E,） of two stages were 68.9 and 86.5kJmo1-1, respectively. The Eo of EP/MHHPA and EP/IMA resin system were 81.04 and 77.9kJmol-I. The processing property of EP/RAM/IMA system, i.e. the relationship between viscosity-temperature-time, was characterized by cone-plate viscometer aim to decide the processing parameter ofprepreg preparation. The effect of RAM content on mechanical performance and dynamic mechanical property was investigated. Noteworthily, compared with the laminates with EP/MHHPA as matrix, the laminates with RAM as hardeners achieved a 44%, 73% and 70℃ increase in bending strength, bending modulus and the glass transition temperature, respectively, due to the bulky hydrogenated phenanthrene ring structure incorporated into the cross-linking networks. When the fiber volume fraction reached 47%, the mechanical property of the laminates prepared with hot melt prepreg was superior or comparable to that of composites with pure petroleum sourced matrix. RAM as cross-linking agent of epoxy resin holds a great potential to satisfy the requirement of composites such as structure and secondary structure parts preparation.展开更多
基金Supported by the Grants from the Thailand Research Fund for fiscal year 2014–2016(TRG5780205)the Grant for Development of New Faculty Staff(Ratchadaphisek Somphot Endowment Fund)of Chulalongkorn Universitythe Center of Excellence on Petrochemical and Materials Technology,Chulalongkorn University
文摘The aim of this study is to determine the effect of the main chemical components ofbiomass： cellulose, hemicel- lulose and lignin, on chemical kinetics ofbiomass pyrolysis. The experiments were designed based on a simplex- lattice mixture design. The pyrolysis was observed by using a thermogravimetric analyzer. The curves obtained from the employed analytical method fit the experimental data （R2 〉 0.9）. This indicated that this method has the potential to determine the kinetic parameters such as the activation energy （E~）, frequency factor （A） and re- action order （n） for each point of the experimental design. The results obtained from the simplex-lattice mixture design indicated that cellulose had a significant effect on Ea and A, and the interaction between cellulose and lignin had an important effect on the reaction order, n. The proposed models were then proved to be useful for predicting pyrolysis behavior in real biomass and so could be used as a simple approximation for predicting the overall trend of chemical reaction kinetics.
基金supported by the China-EU co-funded project ECO-COMPASS(Grant No.MJ2015-HG-103)
文摘In this study, a novel bio-based thermosetting system has been developed from epoxy resin （EP）, with rosin-sourced anhydrides （maleopimaric acid, RAM） as curing agent and imidazole type latent catalyst （two amino imidazole salt complex, IMA）, to be used as matrix for hot-melt prepreg curing at mid-temperature. For comparison, the epoxy resin system with petroleum sourced hardener methylhexahydrophthalicanhydride （MHHPA） was also examined. The curing behaviour and mechanism were investigated by non-isothermal differential scanning calorimeter （DSC） analysis and Fourier transform infrared （FTIR） spectra. The results showed that the curing course of bio-based epoxy resin system containing RAM included two stages, which were the reaction between the free carboxyl group of RAM and oxirane ring under the acceleration of IMA, and the main reaction attributed to the reaction between anhydride and oxirane. According to Kissinger method, the reaction activation energy （E,） of two stages were 68.9 and 86.5kJmo1-1, respectively. The Eo of EP/MHHPA and EP/IMA resin system were 81.04 and 77.9kJmol-I. The processing property of EP/RAM/IMA system, i.e. the relationship between viscosity-temperature-time, was characterized by cone-plate viscometer aim to decide the processing parameter ofprepreg preparation. The effect of RAM content on mechanical performance and dynamic mechanical property was investigated. Noteworthily, compared with the laminates with EP/MHHPA as matrix, the laminates with RAM as hardeners achieved a 44%, 73% and 70℃ increase in bending strength, bending modulus and the glass transition temperature, respectively, due to the bulky hydrogenated phenanthrene ring structure incorporated into the cross-linking networks. When the fiber volume fraction reached 47%, the mechanical property of the laminates prepared with hot melt prepreg was superior or comparable to that of composites with pure petroleum sourced matrix. RAM as cross-linking agent of epoxy resin holds a great potential to satisfy the requirement of composites such as structure and secondary structure parts preparation.
