Chemical-looping gasification （CLG） is a novel process for syngas generation from solid fuels, sharing the same basic principles as chemical-looping combustion （CLC）. It also uses oxygen carriers （mainly metal ox...Chemical-looping gasification （CLG） is a novel process for syngas generation from solid fuels, sharing the same basic principles as chemical-looping combustion （CLC）. It also uses oxygen carriers （mainly metal oxide and calcium sulfate） to transfer heat and oxygen to the fuel. In this paper, the primary investigation into the CLG process with CaSO4 as oxygen carrier was carried out by thermodynamic analysis and experiments in the tube reactor. Sulfur-contained gas emission was mainly H2S rather than SO2 in the CLG process, showing some different features from the CLC. The mass and heat balance of CLG processes were calculated thermodynamically to determinate the auto-thermal operating conditions with different CaSO4/C and steam/C molar ratios. It was found that the CaSO4/C molar ratio should be higher than 0.2 to reach auto-thermal balance. The effect of temperature on the reactions between oxygen carrier and coal was investigated based on Gibbs free energy minimum method and ex- perimental results. It indicated that high temperature favored the CLG process in the fuel reactor and part of syngas was consumed to compensate for auto-thermal system.展开更多
In this study, a coal gasification model is developed based on nine simultaneous reactions. For given gasification temperature and pressure, the air/fuel and water vapor/fuel ratio are optimized for maximum H2/CO rati...In this study, a coal gasification model is developed based on nine simultaneous reactions. For given gasification temperature and pressure, the air/fuel and water vapor/fuel ratio are optimized for maximum H2/CO ratio by parametric study. Furthermore, the cold gas efficiency and higher heating value of the synthesis gas produced are computed for each case. Optimum locations of investigated parameters are also searched for maximizing cold gas efficiency and higher heating value of the synthesis gas.展开更多
基金Supported by the National~ Natural Science Foundation of China （20876079）, the Natural Science Funds for Distinguished Young Scholar in Shandong Province （JQ200904）, and Shandong Province Key Technologies Research and Development Program of China （2008GG 10006010, 2009GG 10007001）.
文摘Chemical-looping gasification （CLG） is a novel process for syngas generation from solid fuels, sharing the same basic principles as chemical-looping combustion （CLC）. It also uses oxygen carriers （mainly metal oxide and calcium sulfate） to transfer heat and oxygen to the fuel. In this paper, the primary investigation into the CLG process with CaSO4 as oxygen carrier was carried out by thermodynamic analysis and experiments in the tube reactor. Sulfur-contained gas emission was mainly H2S rather than SO2 in the CLG process, showing some different features from the CLC. The mass and heat balance of CLG processes were calculated thermodynamically to determinate the auto-thermal operating conditions with different CaSO4/C and steam/C molar ratios. It was found that the CaSO4/C molar ratio should be higher than 0.2 to reach auto-thermal balance. The effect of temperature on the reactions between oxygen carrier and coal was investigated based on Gibbs free energy minimum method and ex- perimental results. It indicated that high temperature favored the CLG process in the fuel reactor and part of syngas was consumed to compensate for auto-thermal system.
文摘In this study, a coal gasification model is developed based on nine simultaneous reactions. For given gasification temperature and pressure, the air/fuel and water vapor/fuel ratio are optimized for maximum H2/CO ratio by parametric study. Furthermore, the cold gas efficiency and higher heating value of the synthesis gas produced are computed for each case. Optimum locations of investigated parameters are also searched for maximizing cold gas efficiency and higher heating value of the synthesis gas.
