锂离子蓄电池大规模检测分选化成系统

锂离子蓄电池大规模检测分选及化成系统采用模块化结构，由三级计算机系统构成：上位监控计算机、中间管理计算机及下位控制计算机，整个系统由１台上位监控计算机、１０台中间管理计算机及８０台下位控制计算机组成。系统具有恒流恒压充电、分段放电、自动报警、自动保护、数据分析、按容量及特性曲线分选电池等功能，是锂离子蓄电池专用的检测分选及化成设备。经实际应用证明，本系统性能稳定、安全可靠、实用性强，满足了锂离子蓄电池生产厂家及科研单位的要求。尤其是其按特性曲线分选锂离子蓄电池的功能，能够使分选出来的电池不经过其它检测，即可直接用于组合电池的制做。

一种大容量动力锂电池的化成系统

随着新能源技术的发展,对大容量的动力锂电池需求越来越多,尤其在电动汽车领域具有广泛的使用;为此设计了一种适用于大容量锂电池的化成系统,说明了其组成和工作原理;为了提高充放电过程中电流控制的精度,采用了可编程反馈式限压恒流斩波控制电路,同时具有限压保护功能,防止锂电池过充过放;化成系统为上下位机结构,由一台上位机(服务器)和若干台下位机(化成单元)组成,组成工业485总线网络,利用上位机对化成过程进行实时监控和数据记录;经试验测试,该系统具有充放电电流大、控制精度高、可多工步编程等特点,能够满足动力锂电池大规模化成生产的需要。

用BP神经网络提高锂离子电池化成系统采样精度

针对自行设计的YX-20A型锂离子电池化成柜采样精度不高的问题,分别采用动量梯度下降法和L-M优化法以三层BP神经网络为预测模型对采样电流数据进行校正;并用校正后的采样数据通过TL494芯片调节设定基准和充放电电流实测值的偏差。研究结果表明:L-M算法能快速收敛,效果优于动量梯度下降法,当隐含层节点数为9时,L-M算法效果最佳;校正后的电流最大相对误差由原来的5%降到1.1%左右,平均误差小于0.5%;校正后基准电流和实测值间的相对误差波动较平缓,其最大相对误差比校正前有明显下降。

CAN总线在锂电池化成系统中的应用

介绍了一种基于数字信号处理器TMS32 0F2 4 3和CAN总线技术的锂电池化成系统。该系统由化成通道 (下位机 )和上位机组成。化成通道和上位机之间的通讯利用控制局域网 (CAN)完成。本文介绍了这个系统的网络拓扑结构、化成通道的通讯软件设计等。

锂电池化成与分选系统设计

介绍了锂电池化成与分选系统,包括针床式化成分容设备BK-8768LH及其配套设备BK-700-192内阻仪、BK-9192分选机及配套开发的一套软件,它除了控制各设备正常运行外及实现多参数综合分选外,重点实现了对数据的有效管理和数据的追溯、统计等功能。

Integration system research and development for three-dimensional laser scanning information visualization in goaf

An integration processing system of three-dimensional laser scanning information visualization in goaf was developed. It is provided with multiple functions, such as laser scanning information management for goaf, cloud data de-noising optimization, construction, display and operation of three-dimensional model, model editing, profile generation, calculation of goaf volume and roof area, Boolean calculation among models and interaction with the third party soft ware. Concerning this system with a concise interface, plentiful data input/output interfaces, it is featured with high integration, simple and convenient operations of applications. According to practice, in addition to being well-adapted, this system is favorably reliable and stable.

Dynamic Changes of Land Ecological Carrying Capacity Based on the Ecological Footprint——By the Case Study of Chengdu City

Chengdu City is in the period of rapid urbanization and industrialization, and the disturbance derived from human activities on environment is increasing remarkablely in recent 20 years. The pressure on environment, economy and population is also increasing and land use in Chengdu has changed enormously. As struc- ture and function of land ecological system change obviously, sustainable development of land productivity has been an important goal and strategic task from now on, and it is necessary to systematically research land ecological carrying capacity based on ecological footprint. The ecological footprint of Chengdu City in the past ten years was calculated and analyzed from the spatial and temporal aspects according to statistical data from 1998 to 2008, as per ecological footprint method, ecological carrying capacity and the GIS spatial analysis method, and regression analysis method. The ecological footprint and ecological carrying capacity values from 2009 to 2019 in Chengdu City were predicted through calculation results in the past ten years. The results show that the ecological footprint and ecological deficit of land use from 1998 to 2008 increased in Chengdu City. The ecological deficit of land use within the city center was in high levels in the past ten years, and the ecological footprint kept raising, especially in areas, such as Shuangliu, Chongzhou, Qingyang among 9 city areas, 4 counties and 6 districts in Chengdu City. There is fanlike distribution of ecological deficit of land use. Analysis shows that the social and natural ecological system is uneven distribution, which is not in sustainable de- velopment situation. The results of the study show that the economic, social and natural ecological system in Chengdu City is not sustainable, and the ecological foot- print is uneven distribution. The analysis of the dynamic change of land ecological carrying capacity in Chengdu City is very important for city government in the pro- cess of the vigorous development in new Tianfu Xinqu, and redevelopment in the northern part of this city.

Fumagillin treatment of hepatocellular carcinoma in rats: An in vivo study of antiangiogenesis

AIM: To investigate the effect and possible mechanisms of antiangiogenesis therapy for HCC in rats.METHODS: Adult male LEW/SsN rats were divided into 3groups, 25 animals each. Group A was the control group.Groups B and C were given diethylnitrosamine, 5 mg/kg/d.In addition, group C rats received an intraperitoneal injection of fumagillin, 30 mg/(kg.d). Five animals in each group were killed at 6th, 12th, 18th, 20th and 24th wk to evaluate the development of HCC and metastasis. Weight of the rats, liver tumors, and number of organs involved by HCC were measured at each stage. We compared methionine aminopeptidase-2 (MetAP-2) mRNA, Bcl-2mRNA, telomerase mRNA, and telomerase activity at 24th wk in the liver tissue of group A rats and tumor tissue of HCC from group B and C rats.RESULTS: No HCC developed in group A, but tumors were present in group B and C rats by the 18th wk. At wk 20 and 24, the median liver weight in group B was 0.64 g (range:0.58-0.70 g) and 0.79 g (range: 0.70-0.90 g) (P = 0.04),and that in group C was 0.37 g (range: 0.35-0.42 g) and 0.39 g (range: 0.35-0.47 g) (P = 0.67). The liver weight in group C rats was significantly lower than that in group B rats (P = 0.009). At the same time, the median metastasis score (number of organ systems involved) was 3 (range2-3)in group B, and 1 (range 1-2) in group C, a significant difference between the groups (P = 0.007, 0.004). The levels of MetAP-2 mRNA were significantly higher in groups B and C than in group A (P = 0.025), and significantly higher in group C than in group B (P = 0.047). The level of Bcl-2 mRNA was significantly higher in group B than in group A (P = 0.024), but lower in group C than in group B, although not significantly (P = 0.072). Telomerase mRNA was significantly higher in group B than in group A (P = 0.025), but significantly lower in group C than in group B (P = 0.016). The same inter-group relationship was also true for telomerase activity (P = 0.025 and 0.046).CONCLUSION: Fumagillin effectively inhibits both liver tumor growth and metastasis in rats in vivo. A possible mechanism is fumagillin-induced inhibition of MetAP-2,which plays an essential role in endothelial cell proliferation.Inhibition of MetAP-2 also results in inhibition of Bcl-2and telomerase activity.

Layout problem of multi-component systems arising for improving maintainability

To improve the mainlainability design efficiency and quality, a layout optimization method for maintainability of multi-component systems was proposed. The impact of the component layout design on system maintainability was analyzed, and the layout problem for maintainability was presented. It was formulated as an optimization problem, where maintainability, layout space and distance requirement were formulated as objective functions. A multi-objective particle swarm optimization algorithm, in which the constrained-domination relationship and the update strategy of the global best were simply modified, was then used to obtain Pareto optimal solutions for the maintainability layout design problem. Finally, application in oxygen generation system of a spacecraft was studied in detail to illustrate the effectiveness and usefulness of the proposed method. The results show that the concurrent maintainability design can be carried out during the layout design process by solving the layout optimization problem for maintainability.

Synthesis of Some More New Sulfur Compounds Bearing Heterocyclic Systems as Biocidal Agents - Part I ： Synthetic of 2-Thioxo Thiadiazinone Derivatives

Some more new sulfur compounds bearing heterocyclic systems mainly 2-thioxo-1,3,4-thiadiazinone derivatives 2-7 and 3-thioxo-1,2,4-triazole derivatives 9 have been synthetic via alkylation, acylation and condensation of dithioic formic acid hydrazide 1 through ring closure reactions with α,β-bi functional groups compounds. Most of the obtained target showed a highly activity towards some microbial in compare with two references antibiotics, Pipercillin and Mycostatine. The structures of the products have been established from their elemental and spectral analysis.

A Hierarchical Model Architecture for Enterprise Integration in Chemical Industries

Towards integration of supply chain, manufacturing/production and investment decision making, this paper presents a hierarchical model architecture which contains six sub-models covering the areas of manufacturing control, production operation, design and revamp, production management, supply chain and investment decision making. Six types of flow, material, energy, information, humanware, partsware and capital are clasified. These flows connect enterprise components/subsystems to formulate system topology and logical structure. Enterprise components/subsystems are abstracted to generic elementary and composite classes. Finally, the model architecture is applied to a management system of an integrated suply chain, and suggestion are made on the usage of the model architecture and further development of the model as well as implementation issues.

Attribute-Based Access Control for Multi-Authority Systems with Constant Size Ciphertext in Cloud Computing

In most existing CP-ABE schemes, there is only one authority in the system and all the public keys and private keys are issued by this authority, which incurs ciphertext size and computation costs in the encryption and decryption operations that depend at least linearly on the number of attributes involved in the access policy. We propose an efficient multi-authority CP-ABE scheme in which the authorities need not interact to generate public information during the system initialization phase. Our scheme has constant ciphertext length and a constant number of pairing computations. Our scheme can be proven CPA-secure in random oracle model under the decision q-BDHE assumption. When user's attributes revocation occurs, the scheme transfers most re-encryption work to the cloud service provider, reducing the data owner's computational cost on the premise of security. Finally the analysis and simulation result show that the schemes proposed in this thesis ensure the privacy and secure access of sensitive data stored in the cloud server, and be able to cope with the dynamic changes of users' access privileges in large-scale systems. Besides, the multi-authority ABE eliminates the key escrow problem, achieves the length of ciphertext optimization and enhances the effi ciency of the encryption and decryption operations.

VPLS Based Quality and Cost Control for Tennessee Eastman Process

Product quality and operation cost control obtain increasing emphases in modern chemical system engineering. To improve the fault detection power of the partial least square (PLS) method for quality control, a new QRPV statistic is proposed in terms of the VP (variable importance in projection) indices of monitored process variables, which is significantly advanced over and different from the conventional Q statistic. QRPV is calculated only by the residuals of the remarkable process variables (RPVs). Therefore, it is the dominant relation between quality and RPV not all process variables (as in the case of the conventional PLS) that is monitored by this new VP-PLS (VPLS) method. The combination of QRPV and T2 statistics is applied to the quality and cost control of the Tennessee Eastman (TE) process, and weak faults can be detected as quickly as possible. Consequently, the product quality of TE process is guaranteed and operation costs are reduced.

Use of agents stimulating erythropoiesis in digestive diseases

Anemia is the most common complication of inflammatory bowel disease (IBD). Control and inadequate treatment leads to a worse quality of life and increased morbidity and hospitalization. Blood loss, and to a lesser extent, malabsorption of iron are the main causes of iron def iciency in IBD. There is also a variable component of anemia related to chronic inflammation. The anemia of chronic renal failure has been treated for many years with recombinant human erythropoietin (rHuEPO), which significantly improves quality of life and survival. Subsequently, rHuEPO has been used progressively in other conditions that occur with anemia of chronic processes such as cancer, rheumatoid arthritis or IBD, and anemia associated with the treatment of hepatitis C virus. Erythropoietic agents complete the range of available therapeutic options for treatment of anemia associated with IBD, which begins by treating the basis of the inflammatory disease, along with intravenous iron therapy as f irst choice. In cases of resistance to treatment with iron, combined therapy with erythropoietic agents aims to achieve near-normal levels of hemoglobin/hematocrit (11-12 g/dL). New formulations of intravenous iron (iron carboxymaltose) and the new generation of erythropoietic agents (darbepoetin and continuous erythropoietin receptor activator) will allow better dosing with the same eff icacy and safety.

A method of dealing polygon’s self-intersection contour in SLA

The contour of the slices of SLA parts is composed of a great deal of small lines. When offsetting the contour to compensate for the radius of laser spot, many self-intersection contours come into being, which decrease the precision of formed parts. A new lemma to judge the local self-intersection contour and the global self-intersection contour separately is put forward, according to which self-intersection contour can be removed reliably. Meanwhile, a new beam offsetting algorithm for SLA parts is described, which brings about good resuits in the practical manufacturing process.

Iron-Oxide Cu-Au Mineralizing Systems： Eastern Yakutia Perspective

The GIS （geographic information system） used for predicting the associated with upper-intrusive zone of hydrothermal alteration IOCG （iron-oxide copper gold） mineralizing systems is shown by example of the northeast of Russian. IOCG ore deposits can have enormous geological resources with significant reserves of base, precious and strategic metals, are economically attractive targets for mineral exploration worldwide, but are still unknown in the northeast Russian. It was localized in Tarinskiy ore node （eastern Yakutia） field of brecciated altered rocks with sulfide and iron-oxide cement is a first in eastern Yakutia nature anomaly of IOCG-type with iron-oxide Cu-Au ± U specialization, that was formed close to the surface of Rep-Yuruinskiy pluton. It should be of interest as a new precious metals world class deposit type in northeast of Russia.

Modeling and Optimization for Heat Exchanger Networks Synthesis Based on Expert System and Genetic Algorithm

A new superstructure form of heat exchanger networks (HEN) isproposed based on expert system system (ES). The new superstructureform is combined with the practical engineering. The differentinvestment cost formula for Different heat exchanger is alsopresented based on ES. The mathematical model for the simultaneousoptimization Of network configuration is established and solved by agenetic algorithm. This method can deal with larger scale HENsynthesis and the optimal HEN configuration is obtainedautomatically. Finally, a case study is presented to Demonstrate theeffectiveness of the method.

Integral Optimization of Systematic Parameters of Flip-Flow Screens

The synthetic index K s for evaluating flip-flow screens is proposed and systematically optimized in view of the whole system. A series of optimized values of relevant parameters are found and then compared with those of the current industrial specifications. The results show that the optimized value K s approaches the one of those famous flip-flow screens in the world. Some new findings on geometric and kinematics parameters are useful for improving the flip-flow screens with a low K s value, which is helpful in developing clean coal technology.

Integration optimization of novel electric power steering system based on quality engineering theory

The dynamic model of a novel electric power steering （EPS） system integrated with active front steering function （the novel EPS system） is built. The concepts and quantitative expressions of the steering road feel, steering sensibility, and steering operation stability are introduced. Based on quality engineering theory, the optimization algorithm is proposed by integrating the Monte Carlo descriptive sampling, elitist non-dominated sorting genetic algorithm （NSGA-II） and 6-sigma design method. With the steering road feel and the steering portability as optimization targets, the system parameters are optimized by the proposed optimization algorithm. The simulation results show that the system optimized based on quality engineering theory can improve the steering road feel, guarantee steering stability and steering portability and thus provide a theoretical basis for the design and optimization of the novel electric power steering system.

Importance measure based optimal maintenance policy for deteriorating components

An optimal maintenance policy tor deteriorating components based on quasi renew-process model is presented. In this policy, the first N - 1 failures of a component are maintained by repairs and the N＇h failure is maintained by replacement. The policy takes replacement actions at component lev- el by considering the fact that more and more components are designed to be field replaceable and maintenance activities are setting free from system halt. Concerning system structure impact, impor- tance measure is employed in the optimization procedure which aims at maximizing the long-rnn prof- it per unit time. Two example series parallel systems are taken to illustrate the policy and it is proved to work well. According to importance analysis, components are classified into important ones and unimportant ones based on the system behavior under their failures. Simulation results show that the presented policy makes a clear distinction between them and takes effective mainte- nance actions to compensate the deteriorating of components.