The development of new catalytic techniques for wastewater treatment has long attracted much attention from industrial and academic communities.However,because of catalyst leaching during degradation,catalysts can be ...The development of new catalytic techniques for wastewater treatment has long attracted much attention from industrial and academic communities.However,because of catalyst leaching during degradation,catalysts can be short lived,and therefore expensive,and unsuitable for use in wastewater treatment.In this work,we developed a bimetallic CuO-Co3O4@γ-Al2O3 catalyst for phenol degradation with bicarbonate-activated H2O2.The weakly basic environment provided by the bicarbonate buffer greatly suppresses leaching of active Cu and Co metal ions from the catalyst.X-ray diffraction and X-ray photoelectron spectroscopy results showed interactions between Cu and Co ions in the CuO-Co3O4@γ-Al2O3 catalyst,and these improve the catalytic activity in phenol degradation.Mechanistic studies using different radical scavengers showed that superoxide and hydroxyl radicals both played significant roles in phenol degradation,whereas singlet oxygen was less important.展开更多
With the development and decreasing cost of sequencing techniques, it is possible for scientists to conduct deeper research in phylogenomics. During the procedure of phylogenomic analysis, the mostimportant and vitale...With the development and decreasing cost of sequencing techniques, it is possible for scientists to conduct deeper research in phylogenomics. During the procedure of phylogenomic analysis, the mostimportant and vitalest step is orthology prediction, for that the prerequisite to phylogenetic reconstruction is that the genes being compared are orthologous. Here we briefly review the related concept of orthology anddifferent methods for orthology prediction. We also provide recommendations to give some advice for better selection of orthology prediction methods.展开更多
The cracking of polyolefins, especially polyethylene in the molten state was effectively catalyzed by the powdery spent FCC （Fluid Catalytic Cracking） catalyst which was dispersed in it. The activation energy of the...The cracking of polyolefins, especially polyethylene in the molten state was effectively catalyzed by the powdery spent FCC （Fluid Catalytic Cracking） catalyst which was dispersed in it. The activation energy of the catalytic cracking of polyethylene was about 74 kJ/mol. The cracked product was naphtha and middle distillate as the major product and gaseous hydrocarbon （C1-C4） as the minor product while little heavy oil was produced. The chemical compositions of the product were： aromatic hydrocarbons, isoparaffins and branched olefins, whereas that of the non-catalyzed products were： n-olefins and n-paraffins with minor amount of dienes with increasing the process time. Additionally, the product pattern shifted from naphtha rich product to kerosene and gas-oil rich product. However, any catalytic product showed low fluid point （〈 -10 ℃）, while that of the non-catalyzed product was as high as 40 ℃. Catalyst could process, more than 100 times by weight of polyethylene with fairly small amount （- 30 wt%） of coke deposition. Spent catalyst gave higher hydrocarbons while fresh catalyst gave gaseous product as the major product. Other polyolefins such as polypropylene and polystyrene were tested on same catalyst to show that their reactivity is higher than that of polyethylene and gave the aliphatic products, alkyl benzenes and C6-C9 iso-paraffins as the major product. Product pattern of the cracked product suggested that the reaction proceeded via the primary reactions making paraffins and olefins which were followed by the isomerization, secondary cracking, aromatization and hydrogen transfer which based on the carbenium ion mechanism.展开更多
基金supported by the National Natural Science Foundation of China(21273086)Chutian Scholar Foundation from Hubei Province,China~~
文摘The development of new catalytic techniques for wastewater treatment has long attracted much attention from industrial and academic communities.However,because of catalyst leaching during degradation,catalysts can be short lived,and therefore expensive,and unsuitable for use in wastewater treatment.In this work,we developed a bimetallic CuO-Co3O4@γ-Al2O3 catalyst for phenol degradation with bicarbonate-activated H2O2.The weakly basic environment provided by the bicarbonate buffer greatly suppresses leaching of active Cu and Co metal ions from the catalyst.X-ray diffraction and X-ray photoelectron spectroscopy results showed interactions between Cu and Co ions in the CuO-Co3O4@γ-Al2O3 catalyst,and these improve the catalytic activity in phenol degradation.Mechanistic studies using different radical scavengers showed that superoxide and hydroxyl radicals both played significant roles in phenol degradation,whereas singlet oxygen was less important.
基金supported by the National Natural Science Foundation of China (J0930005,30970350,31071959)
文摘With the development and decreasing cost of sequencing techniques, it is possible for scientists to conduct deeper research in phylogenomics. During the procedure of phylogenomic analysis, the mostimportant and vitalest step is orthology prediction, for that the prerequisite to phylogenetic reconstruction is that the genes being compared are orthologous. Here we briefly review the related concept of orthology anddifferent methods for orthology prediction. We also provide recommendations to give some advice for better selection of orthology prediction methods.
文摘The cracking of polyolefins, especially polyethylene in the molten state was effectively catalyzed by the powdery spent FCC （Fluid Catalytic Cracking） catalyst which was dispersed in it. The activation energy of the catalytic cracking of polyethylene was about 74 kJ/mol. The cracked product was naphtha and middle distillate as the major product and gaseous hydrocarbon （C1-C4） as the minor product while little heavy oil was produced. The chemical compositions of the product were： aromatic hydrocarbons, isoparaffins and branched olefins, whereas that of the non-catalyzed products were： n-olefins and n-paraffins with minor amount of dienes with increasing the process time. Additionally, the product pattern shifted from naphtha rich product to kerosene and gas-oil rich product. However, any catalytic product showed low fluid point （〈 -10 ℃）, while that of the non-catalyzed product was as high as 40 ℃. Catalyst could process, more than 100 times by weight of polyethylene with fairly small amount （- 30 wt%） of coke deposition. Spent catalyst gave higher hydrocarbons while fresh catalyst gave gaseous product as the major product. Other polyolefins such as polypropylene and polystyrene were tested on same catalyst to show that their reactivity is higher than that of polyethylene and gave the aliphatic products, alkyl benzenes and C6-C9 iso-paraffins as the major product. Product pattern of the cracked product suggested that the reaction proceeded via the primary reactions making paraffins and olefins which were followed by the isomerization, secondary cracking, aromatization and hydrogen transfer which based on the carbenium ion mechanism.
