浅谈煤的工业分析与化验中煤的灰分测定

随着社会的发展,煤炭行业也得到了很大程度上的提升。煤的灰分产率是煤在生产过程中被加工成合格产品的重要指标,也是衡量煤炭品质好坏标准之一,根据我国《煤矿管理技术规定》和国家有关部门出台了一系列关于矿井瓦斯抽采率、综合利用程度及抽提纯等方面相关指标要求。现阶段社会经济高速发展,能源结构调整以及环境污染问题日益严重,煤矿企业对煤的质量提出越来越高要求,而由于煤炭生产工艺条件复杂多变、设备装置先进性差,因此急需研究煤的工业分析与化验中煤的灰分测定,也能保证安全生产和提高经济效益。本文对此进行了简单介绍,以供参考。

Experiment study of optimization on prediction index gases of coal spontaneous combustion

The coal of Anyuan Mine has the characteristic of easy spontaneous combustion. Conventional method is difficult to predict it. Coal samples from this mine were tested in laboratory. The data obtained from laboratory determination were initialized for the value which was defined as "K". The ratio of each index gas and value of "K", and the ratio of combination index gases and value of "K", were analyzed simultaneously. The research results show that for this coal mine, if there is carbon monoxide in the gas sample, the phenomenon of oxidation and temperature rising for coal exists in this mine; if there is C_2H_4 in the gas sample, the temperature of coal perhaps exceeds 130 °C. If the coal temperature is between 35 °C and 130 °C, prediction and forecast for coal spontaneous combustion depend on the value of Φ(CO)/K mainly; if the temperature of coal is between 130 °C and 300 °C, prediction and forecast for coal spontaneous combustion depend on the value of Φ(C_2H_6)/Φ(C_2H_2) and Φ(C_2H_6)/K. The research results provide experimental basis for the prediction of coal spontaneous combustion in Anyuan coal mine, and have better guidance on safe production of this coal mine.

Development and Lubricating Properties of Rolling Oil for Stainless Steel Cold Rolling

Appropriate base oils and homologous additives such as extreme pressure and anti-wear agents,oiliness agents and antioxidants were selected,and experiments testing the compatibility performance between additive,base oil and other components were carried out to develop the SK and SD series of rolling oils for cold rolling of stainless steel.The developed oils were used in the stainless steel cold rolling lubrication experiments,and were successfully applied in the actual cold rolling operation of stainless steel.Compared with a foreign product,the tribological properties,the thermal oxidation stability,and the rolling lubrication performance of the developed stainless steel cold rolling oils were studied.Test results showed that the tribological properties of the thereby developed rolling oils and the reference one were almost at the same level,and to some extent the performance of rolling was even better than the foreign product,at the same time the stainless steel sheet could retain its well annealed performance.Meanwhile,within a certain range,the lubrication of the rolling oil became better as its viscosity increased at the same level of saponification value,which could provide a lower friction coefficient,so that a higher maximum reduction ratio of the rolled piece through a constant roll gap and a minimum thickness could be secured.Also,similar phenomena appeared as the saponification value increased at a same viscosity level of the rolling oils.

Use of Chromium Oxide and Alkane Indicator Methods for Determination of Feed Intake for Grazing Sheep

This experiment was carried out to determine feed intake and digestibility of grazing sheep on pasture. A total of 14 animals randomly divided into two groups with seven animals each group were used in the experiment. Digestibility of pastures was determined using two types of markers-alkane （C32-C36） and chromium oxide. Dry matter intake （DMI） was 717.22 g/d based on chromium oxide method in the experiment, while according to alkane method, DMI was 965.93 g/d and 1,051.07 g/d for C32 and C36, respectively. In conclusion, pastures met 74%-81% of crude protein （CP） and 57%-61% of energy requirements of lambs grazing on Yuzuncu Yil University pasture, who are mid-quality and 4-7 month-old with a 275 g/d expected daily gain. It was calculated that when 628-693 g/d of barley is given, both CP and metabolizable energy （ME） requirements of animals can be met.

Obtain Thematic Maps of Diyarbakir Basalt Aquifer＇s Water Quality Parameters with Using GIS Technique

In this study, groundwater quality and water features of Diyarbakir urban basalt aquifer which contains Baglar, Kayapmar, Sur and Yenisehir residential areas aimed to be determined. At this location, water wells opened for drinking water and irrigation water are used in the agricultural field. Therefore, in the study area, which opened in water samples taken from water wells were examined. It was reformed in the field, water samples were taken from the predrilled water wells. Water wells in the same coordinates are determined by Garmin etrex 30 handheld GPS system. Chemical analysis of water samples taken in the laboratory was made. The wells water＇s pH, Electrical Conductivity （EC） and Dissolved Solids （TDS） features were acquired by Portable Hanna HI 98125 pH/EC/TDS/℃ meter device at the field. At this study, basalt aquifer features are considered, and water quality and water chemical properties were determined in Diyarbakir city centre, pH, EC and TDS values of the water samples taken on site and those water chemical analyses were measured in the laboratory. Then, they were modelled by using ARC INFO 10.2.1 GIS programme and geostatistical analyst extension tool. At the end of this process, thematic map of Diyarbakir＇s basalt aquifer pH, EC and TDS were produced.

Experimentally Determining Bloch Parameters of Hamiltonian for Single-Qubit Systems

By considering the identification problem of unknown but fixed Hamiltonian H = S0σ0 ＋∑i=x,y,z Siσi where σi （i = x, y, z） are pauli matrices and σ0=I, we explore the feasibility and limitation of empirically determining the Hamiltonian parameters for quantum systems under experimental conditions imposed by projective measurements and initialization procedures. It may be unsurprising to physicists that one can not obtain the knowledge of So no matter what kind of projective measurements and initialization are permitted, but the observation draws our attention to the importance of the parameter identifiability under different experimental condition. It has also been revealed that one can obtain the knowledge of ｜Sz｜ and Sx^2＋Sy^2 at most when only the projective measurement {｜0/（0｜, ｜1/（1｜} is permitted to perform on and initialize the qubit. Further more, we demonstrated that it is feasible to distinguish ｜Sx｜, ｜Sy｜, and ｜Sz｜ even without any a priori information about Hamiltonian if at least two kinds of projective measurement or initialization procedures are permitted. It should be emphasized that both projective measurements and initialization procedures play an important role in quantum system identification.

Study on Development of Formulated Feed for Improving Growth and Pigmentation of Koi Carp （Cyprinus carpio L,, 1758） Juveniles

The aim of the present study was to develop a formulated feed for improving skin pigmentation and growth performance of koi carp juveniles. Two experiments were conducted for determination of an optimal dietary astaxanthin and FM （fish meal） ration for koi carp juveniles. In the first experiment, three isonitrogenous and isoenergetic dietary treatments were designed with three different levels of astaxanthin consisted of 60, 80 and 100 mg/kg and a commercial feed served as a control. For the second experiment, four isonitrogenous and isoenergetic dietary treatments were formulated with graded inclusions of dietary FM replaced from 0% to 60% at 20% increments by SM （soybean meal）, PBM （poultry by-product meal）, and a CD （control diet）. Obtained results demonstrated that skin pigmentation of koi carp juveniles fed the diet containing 80 mg/kg astaxanthin, 36.02% protein, 7.78% lipid, 4.20 Kcal/g GE （gross energy） were more better than those at the diet with lower estaxanthin content and commercial diet. Moreover, the highest growth and feed utilization of fish were observed at this diet with WG （weight gain）, SGR （specific growth rate） and FCR （feed conversion ratio） were 121.80%, 0.95 （%/day） and 1.6, respectively.

Effects of vacancies on interwall spacings of multi-walled carbon nanotubes

We use molecular dynamics (MD) simulations to study the effects of vacancies on tube diameters and interwall spacings of multi-walled carbon nanotubes (MWCNTs). Two types of vacancies, double vacancy and three dangling-bond (3DB) single vacancy, are identified to have opposite effects on the tube size change, which explains the inconsistency of the experimentally measured interwall spacings of MWCNTs after electron beam irradiation. A theoretical model to quantitatively predict the shrunk structures of the irradiated MWCNTs is further developed. We also discuss the fabrications of prestressed MWCNTs, in which reduced interwall spacings are desired to enhance the overall elastic modulus and strength.

Determination of the ^(25)Mg(p,γ)^(26)Al resonance strength at E_(c.m.)=58 keV via shell model calculation

The observation of 26Al is an useful tool for γ-ray astronomy and in studies of galactic chemical evolution. The most likely mechanism for 26Al nucleosynthesis is in the hydrogen burning MgAI cycle, and the 26Al production reaction 25Mg（p, γ）26Al at the important temperature range below T = 0.2 GK is still not well known. The spectroscopic factor of 58 keV resonance level in 26Al is determined with shell model calculation and then used to deduce the resonance strength of the 25Mg（p, γ）26Al reaction. The result provides a reference for the future 25Mg（p, γ）26Al direct measurement at Jinping underground laboratory.