北斗系统时BDT解析

通过解析术语—北斗系统时BDT,讨论与北斗授时应用相关的时间尺度、系统时间、定时误差等问题,有利于北斗PNT组合应用与标准化。

The method and experiment analysis of two-way common-view satellite time transfer for compass system

Time synchronization between ground and satellites is a key technology for satellite navigation system. With dual-channel satellite, a method called Two-Way Common-View(TWCV) satellite time transfer for Compass system is proposed, which combines both characteristics of satellite common-view and two-way satellite-ground time transfer. By satellite-ground two-way pseudo-range differencing and two stations common-view differencing, this TWCV method can completely eliminate the influence of common errors, such as satellite clock offset, ephemeris errors, troposphere delay and station coordinates errors. At the same time, ionosphere delay related to signal frequency is also weakened significantly. So the precision of time transfer is improved much more greatly than before. In this paper, the basic principle is introduced in detail, the effect of major errors is analyzed and the practical calculation model in the Earth-fixed coordinate system for this new method is provided. Finally, experiment analysis is conducted with actual Compass observing data. The results show that the deviation and the stability of the satellite dual channel can be better than 0.1 ns, and the accuracy of the two-way common-view satellite time transfer can achieve 0.4 ns. All these results have verified the correctness of this TWCV method and model. In addition, we compare this TWCV satellite time transfer with the independent C-band TWSTFT(Two-Way Satellite Time and Frequency Transfer). It shows that the result of the TWCV satellite time transfer is in accordance with the C-band TWSTFT result, which further suggests that the TWCV method is a remote high precision time transfer technique. The research results in this paper are very important references for the development and application of Compass satellite navigation system.

COMPASS time synchronization and dissemination—Toward centimetre positioning accuracy

In this paper we investigate methods to achieve highly accurate time synchronization among the satellites of the COMPASS global navigation satellite system(GNSS).Owing to the special design of COMPASS which implements several geo-stationary satellites(GEO),time synchronization can be highly accurate via microwave links between ground stations to the GEO satellites.Serving as space-borne relay stations,the GEO satellites can further disseminate time and frequency signals to other satellites such as the inclined geo-synchronous(IGSO)and mid-earth orbit(MEO)satellites within the system.It is shown that,because of the accuracy in clock synchronization,the theoretical accuracy of COMPASS positioning and navigation will surpass that of the GPS.In addition,the COMPASS system can function with its entire positioning,navigation,and time-dissemination services even without the ground link,thus making it much more robust and secure.We further show that time dissemination using the COMPASS-GEO satellites to earth-fixed stations can achieve very high accuracy,to reach 100 ps in time dissemination and 3 cm in positioning accuracy,respectively.In this paper,we also analyze two feasible synchronization plans.All special and general relativistic effects related to COMPASS clocks frequency and time shifts are given.We conclude that COMPASS can reach centimeter-level positioning accuracy and discuss potential applications.

Time synchronization in communication networks based on the Beidou foundation enhancement system

Communication networks rely on time synchronization information generated by base station equipment(either the Global Navigation Satellite System receiver or rubidium atomic clock) to enable wireless networking and communications. Meanwhile, the time synchronization among base stations depends on the Network Time Protocol. With the development of mobile communication systems, the corresponding time synchronization accuracy has increased as well. In this case, the use of sparsely distributed-high-precision synchronization points to synchronize time for an entire network with high precision is a key problem and is the foundation of the enhanced network communication. The current receiver equipment for China's digital synchronous network typically includes dedicated multi-channel GPS receivers for communication; however, with the development of GPS by the USA, network security has been destabilized and reliability is low. Nonetheless, network time synchronization based on Beidou satellite navigation system timing devices is an inevitable development trend for China's digital communications network with the establishment of the independently developed BDS, especially the implementation and improvement of the Beidou foundation enhancement system.

Applications of two-way satellite time and frequency transfer in the BeiDou navigation satellite system

A two-way satellite time and frequency transfer(TWSTFT) device equipped in the BeiDou navigation satellite system(BDS)can calculate clock error between satellite and ground master clock. TWSTFT is a real-time method with high accuracy because most system errors such as orbital error, station position error, and tropospheric and ionospheric delay error can be eliminated by calculating the two-way pseudorange difference. Another method, the multi-satellite precision orbit determination(MPOD)method, can be applied to estimate satellite clock errors. By comparison with MPOD clock estimations, this paper discusses the applications of the BDS TWSTFT clock observations in satellite clock measurement, satellite clock prediction, navigation system time monitor, and satellite clock performance assessment in orbit. The results show that with TWSTFT clock observations, the accuracy of satellite clock prediction is higher than MPOD. Five continuous weeks of comparisons with three international GNSS Service(IGS) analysis centers(ACs) show that the reference time difference between BeiDou time(BDT) and golbal positoning system(GPS) time(GPST) realized IGS ACs is in the tens of nanoseconds. Applying the TWSTFT clock error observations may obtain more accurate satellite clock performance evaluation in the 104 s interval because the accuracy of the MPOD clock estimation is not sufficiently high. By comparing the BDS and GPS satellite clock performance, we found that the BDS clock stability at the 103 s interval is approximately 10.12, which is similar to the GPS IIR.

Satellite-station time synchronization information based real-time orbit error monitoring and correction of navigation satellite in Beidou System

Satellite-station two-way time comparison is a typical design in Beidou System(BDS)which is significantly different from other satellite navigation systems.As a type of two-way time comparison method,BDS time synchronization is hardly influenced by satellite orbit error,atmosphere delay,tracking station coordinate error and measurement model error.Meanwhile,single-way time comparison can be realized through the method of Multi-satellite Precision Orbit Determination(MPOD)with pseudo-range and carrier phase of monitor receiver.It is proved in the constellation of 3GEO/2IGSO that the radial orbit error can be reflected in the difference between two-way time comparison and single-way time comparison,and that may lead to a substitute for orbit evaluation by SLR.In this article,the relation between orbit error and difference of two-way and single-way time comparison is illustrated based on the whole constellation of BDS.Considering the all-weather and real-time operation mode of two-way time comparison,the orbit error could be quantifiably monitored in a real-time mode through comparing two-way and single-way time synchronization.In addition,the orbit error can be predicted and corrected in a short time based on its periodic characteristic.It is described in the experiments of GEO and IGSO that the prediction accuracy of space signal can be obviously improved when the prediction orbit error is sent to the users through navigation message,and then the UERE including terminal error can be reduced from 0.1 m to 0.4 m while the average accuracy can be improved more than 27%.Though it is still hard to make accuracy improvement for Precision Orbit Determination(POD)and orbit prediction because of the confined tracking net and the difficulties in dynamic model optimization,in this paper,a practical method for orbit accuracy improvement is proposed based on two-way time comparison which can result in the reflection of orbit error.

Orbit determination and prediction for Beidou GEO satellites at the time of the spring/autumn equinox

Geostationary(GEO) satellites form an indispensable component of the constellation of Beidou navigation system(BDS). The ephemerides, or predicted orbits of these GEO satellites(GEOs), are broadcast to positioning, navigation, and timing users. User equivalent ranging error(UERE) based on broadcast message is better than 1.5 m(root formal errors: RMS) for GEO satellites. However, monitoring of UERE indicates that the orbital prediction precision is significantly degraded when the Sun is close to the Earth's equatorial plane(or near spring or autumn Equinox). Error source analysis shows that the complicated solar radiation pressure on satellite buses and the simple box-wing model maybe the major contributor to the deterioration of orbital precision. With the aid of BDS' two-way frequency and time transfer between the GEOs and Beidou time(BDT, that is maintained at the master control station), we propose a new orbit determination strategy, namely three-step approach of the multi-satellite precise orbit determination(MPOD). Pseudo-range(carrier phase) data are transformed to geometric range(biased geometric range) data without clock offsets; and reasonable empirical acceleration parameters are estimated along with orbital elements to account for the error in solar radiation pressure modeling. Experiments with Beidou data show that using the proposed approach, the GEOs' UERE when near the autumn Equinox of 2012 can be improved to 1.3 m from 2.5 m(RMS), and the probability of user equivalent range error(UERE)<2.0 m can be improved from 50% to above 85%.