新一代北斗时统终端分类及测试技术分析

本文在对新一代北斗时统终端功能深入分析和分类的基础上,对关键的性能技术指标进行深化论证,并提出相应的测试方法,这些方法有利于对新一代北斗时统终端的重要性能进行准确的考核;并且,通过实验验证的手段对时间保持性能指标测试方法进行论证,提出合理可行的测试方案。这将利于对新一代北斗时统终端性能进行全面准确的测试评估。

基于北斗SoC的雷达数据采集系统设计

介绍一种雷达数据采集系统设计方法,采用北斗SoC芯片开发了一套时统电路,通过FPGA生成与雷达交互的时序信号,并将采集到的雷达数据加上北斗时间信息。为了达到数据采集系统所需的时间精度,通过北斗芯片输出的1PPS信号对所有时序信号进行同步,确保雷达测距系统和角编码系统有序将数据放置在总线上。该设计实现了数据采集、航迹模拟、数据转发、卡尔曼滤波等功能,减少了系统接口电路板,集成度和稳定性大大提高,对雷达数据采集系统的小型化起到了重要作用。

The method and experiment analysis of two-way common-view satellite time transfer for compass system

Time synchronization between ground and satellites is a key technology for satellite navigation system. With dual-channel satellite, a method called Two-Way Common-View(TWCV) satellite time transfer for Compass system is proposed, which combines both characteristics of satellite common-view and two-way satellite-ground time transfer. By satellite-ground two-way pseudo-range differencing and two stations common-view differencing, this TWCV method can completely eliminate the influence of common errors, such as satellite clock offset, ephemeris errors, troposphere delay and station coordinates errors. At the same time, ionosphere delay related to signal frequency is also weakened significantly. So the precision of time transfer is improved much more greatly than before. In this paper, the basic principle is introduced in detail, the effect of major errors is analyzed and the practical calculation model in the Earth-fixed coordinate system for this new method is provided. Finally, experiment analysis is conducted with actual Compass observing data. The results show that the deviation and the stability of the satellite dual channel can be better than 0.1 ns, and the accuracy of the two-way common-view satellite time transfer can achieve 0.4 ns. All these results have verified the correctness of this TWCV method and model. In addition, we compare this TWCV satellite time transfer with the independent C-band TWSTFT(Two-Way Satellite Time and Frequency Transfer). It shows that the result of the TWCV satellite time transfer is in accordance with the C-band TWSTFT result, which further suggests that the TWCV method is a remote high precision time transfer technique. The research results in this paper are very important references for the development and application of Compass satellite navigation system.

Satellite-station time synchronization information based real-time orbit error monitoring and correction of navigation satellite in Beidou System

Satellite-station two-way time comparison is a typical design in Beidou System(BDS)which is significantly different from other satellite navigation systems.As a type of two-way time comparison method,BDS time synchronization is hardly influenced by satellite orbit error,atmosphere delay,tracking station coordinate error and measurement model error.Meanwhile,single-way time comparison can be realized through the method of Multi-satellite Precision Orbit Determination(MPOD)with pseudo-range and carrier phase of monitor receiver.It is proved in the constellation of 3GEO/2IGSO that the radial orbit error can be reflected in the difference between two-way time comparison and single-way time comparison,and that may lead to a substitute for orbit evaluation by SLR.In this article,the relation between orbit error and difference of two-way and single-way time comparison is illustrated based on the whole constellation of BDS.Considering the all-weather and real-time operation mode of two-way time comparison,the orbit error could be quantifiably monitored in a real-time mode through comparing two-way and single-way time synchronization.In addition,the orbit error can be predicted and corrected in a short time based on its periodic characteristic.It is described in the experiments of GEO and IGSO that the prediction accuracy of space signal can be obviously improved when the prediction orbit error is sent to the users through navigation message,and then the UERE including terminal error can be reduced from 0.1 m to 0.4 m while the average accuracy can be improved more than 27%.Though it is still hard to make accuracy improvement for Precision Orbit Determination(POD)and orbit prediction because of the confined tracking net and the difficulties in dynamic model optimization,in this paper,a practical method for orbit accuracy improvement is proposed based on two-way time comparison which can result in the reflection of orbit error.

Applications of two-way satellite time and frequency transfer in the BeiDou navigation satellite system

A two-way satellite time and frequency transfer(TWSTFT) device equipped in the BeiDou navigation satellite system(BDS)can calculate clock error between satellite and ground master clock. TWSTFT is a real-time method with high accuracy because most system errors such as orbital error, station position error, and tropospheric and ionospheric delay error can be eliminated by calculating the two-way pseudorange difference. Another method, the multi-satellite precision orbit determination(MPOD)method, can be applied to estimate satellite clock errors. By comparison with MPOD clock estimations, this paper discusses the applications of the BDS TWSTFT clock observations in satellite clock measurement, satellite clock prediction, navigation system time monitor, and satellite clock performance assessment in orbit. The results show that with TWSTFT clock observations, the accuracy of satellite clock prediction is higher than MPOD. Five continuous weeks of comparisons with three international GNSS Service(IGS) analysis centers(ACs) show that the reference time difference between BeiDou time(BDT) and golbal positoning system(GPS) time(GPST) realized IGS ACs is in the tens of nanoseconds. Applying the TWSTFT clock error observations may obtain more accurate satellite clock performance evaluation in the 104 s interval because the accuracy of the MPOD clock estimation is not sufficiently high. By comparing the BDS and GPS satellite clock performance, we found that the BDS clock stability at the 103 s interval is approximately 10.12, which is similar to the GPS IIR.

COMPASS time synchronization and dissemination—Toward centimetre positioning accuracy

In this paper we investigate methods to achieve highly accurate time synchronization among the satellites of the COMPASS global navigation satellite system(GNSS).Owing to the special design of COMPASS which implements several geo-stationary satellites(GEO),time synchronization can be highly accurate via microwave links between ground stations to the GEO satellites.Serving as space-borne relay stations,the GEO satellites can further disseminate time and frequency signals to other satellites such as the inclined geo-synchronous(IGSO)and mid-earth orbit(MEO)satellites within the system.It is shown that,because of the accuracy in clock synchronization,the theoretical accuracy of COMPASS positioning and navigation will surpass that of the GPS.In addition,the COMPASS system can function with its entire positioning,navigation,and time-dissemination services even without the ground link,thus making it much more robust and secure.We further show that time dissemination using the COMPASS-GEO satellites to earth-fixed stations can achieve very high accuracy,to reach 100 ps in time dissemination and 3 cm in positioning accuracy,respectively.In this paper,we also analyze two feasible synchronization plans.All special and general relativistic effects related to COMPASS clocks frequency and time shifts are given.We conclude that COMPASS can reach centimeter-level positioning accuracy and discuss potential applications.

Time synchronization in communication networks based on the Beidou foundation enhancement system

Communication networks rely on time synchronization information generated by base station equipment(either the Global Navigation Satellite System receiver or rubidium atomic clock) to enable wireless networking and communications. Meanwhile, the time synchronization among base stations depends on the Network Time Protocol. With the development of mobile communication systems, the corresponding time synchronization accuracy has increased as well. In this case, the use of sparsely distributed-high-precision synchronization points to synchronize time for an entire network with high precision is a key problem and is the foundation of the enhanced network communication. The current receiver equipment for China's digital synchronous network typically includes dedicated multi-channel GPS receivers for communication; however, with the development of GPS by the USA, network security has been destabilized and reliability is low. Nonetheless, network time synchronization based on Beidou satellite navigation system timing devices is an inevitable development trend for China's digital communications network with the establishment of the independently developed BDS, especially the implementation and improvement of the Beidou foundation enhancement system.