基于匹配滤波法的超高频局部放电信号检测

在强电磁干扰环境下准确获取局部放电信号是目前研究的难点。超高频局部放电过程的频散现象会影响波形匹配法消除干扰的效果,因此文中基于频谱最优匹配原则构造滤波器,以使超高频局部放电信号的能量得到增强,从而获得最大的信噪比。文中还采用改进的粒子群算法提高了优化计算的速度和可靠性。实验和分析结果均表明,在强干扰背景下,频谱最优匹配滤波法对白噪干扰和周期性窄带干扰均有较好的消噪效果,并可保持超高频局部放电脉冲的波形、幅值和极性信息。

L1 norm optimal solution match processing in the wavelet domain

Greater attention has been paid to vintage-merge processing of seismic data and extracting more valuable information by the geophysicist. A match filter is used within many important areas such as splicing seismic data, matching seismic data with different ages and sources, 4-D seismic monitoring, and so on. The traditional match filtering method is subject to many restrictions and is usually difficult to overcome the impact of noise. Based on the traditional match filter, we propose the wavelet domain L1 norm optimal matching filter. In this paper, two different types of seismic data are decomposed to the wavelet domain, different detailed effective information is extracted for Ll-norm optimal matching, and ideal results are achieved. Based on the model test, we find that the L1 norm optimal matching filter attenuates the noise and the waveform, amplitude, and phase coherence of result signals are better than the conventional method. The field data test shows that, with our method, the seismic events in the filter results have better continuity which achieves the high precision seismic match requirements.

Interpolation of near offset using surface-related multiples

In this research, we present a seismic trace interpolation method which uses seismic data with surface-related multiples. It is different from conventional seismic data interpolation using information transformation or extrapolation of adjacent channels for reconstruction of missing seismic data. In this method there are two steps, first, we construct pseudo-primaries by cross-correlation of surface multiple data to extract the missing near- offset information in multiples, which are not displayed in the acquired seismic record. Second, we correct the pseudo-primaries by applying a Least-squares Matching Filter （LMF） and RMS amplitude correction method in time and space sliding windows. Then the corrected pseudo-primaries can be used to fill the data gaps. The method is easy to implement, without the need to separate multiples and primaries. It extracts the seismic information contained by multiples for filling missing traces. The method is suitable for seismic data with surfacerelated multiples.

A Novel Matched Filter Structure with Neuron MOS Devices

Based on the principle of the neuron MOS device,a novel matched filter structure which is easily realized by neuron MOS is presented and the details of circuit performance is analyzed.Compared to the conventional structure,the number of circuit elements is decreased greatly for the same function.The test chip is fabricated in 0.35μm process,and the measured result shows that the system structure is feasible and effective.

Multiple subtraction method based on a non-causal matching filter

The filter operator used in normal multichannel matching filter is physically realizable. This filter operator only delays seismic data in the filtering process. A non- causal multichannel matching filter based on a least squares criterion is proposed to resolve the problem in which predicted multiple model data is later than real data. The differences between causal and non-causal multichannel matching filters are compared using a synthetic shot gather, which demonstrates the validity of the non-causal matching filter. In addition, a variable length sliding window which changes with offset and layer velocity is proposed to solve the count of events increasing with increasing offset in a fixed length sliding window. This variable length sliding window is also introduced into the modified and expanded multichannel matching filter. This method is applied to the Pluto1.5 synthetic data set. The benefits of the non-causal filter operator and variable length sliding window are demonstrated by the good multiple attenuation result.

Matched Filter Based Spectrum Sensing When Primary User Has Multiple Power Levels

In this paper,we investigate the matched filter based spectrum sensing in a more reasonable cognitive radio(CR) scenario when the primary user(PU) has more than one transmit power levels,as regulated in most standards,i.e.,IEEE 802.11 Series,GSM,LTE,LTE-A,etc.This new multiple primary transmit power(MPTP) scenario is specialized by two different targets:detecting the presence of PU and identifying the power level.Compared to the traditional binary sensing where only the presence of PU is checked,SU may attain more information about the primary network(making CR more "intelligent") and design the subsequent optimization strategy.The key technology is the multiple hypothesis testing as opposed to the traditional binary hypothesis testing.We discuss two situations under whether the channel phase is known or not,and we derive the closed form solutions for decision regions and several performance metrics,from which some interesting phenomenons are observed and the related discussions are presented.Numerical examples are provided to corroborate the proposed studies.

A Novel Electromagnetic Bandgap Structure for Filter

Electromagnetic bandgap （EBG） materials are periodic structures capable of prohibiting the propagation of electromagnetic waves within a certain band of frequencies. This characteristic of EBG has wide application. The structures to be studied here are mainly planar EBG materials of two dimensions, which are periodic arrays of holes etched in the ground plane of a conventional microstrip line. EBG structures are calculated with finite-difference time-domain （FDTD） method in this paper. Technique of the perfectly matched layer is used for the absorption of electromagnetic waves in FDTD. The FDTD method is programmed with the blend of C++ and Matlab languages, which makes the program both simple and fast computing. A kind of new EBG structure is brought out through a lot of experiments and analyses. A filter with wide stop-band and another filter with two stop-bands are designed.

A new method to estimate DOA in CDMA system in multi-path environment

An algorithm for direction angle of arrival(DOA) estimation and array calibration of signals from multiple mobile users in the CDMA systems and multi-path environment was presented . The main idea is that the algorithm employs code-matched filter and model of the inter-symbol interference and multiple-access interference exactly. The correlation matrices of the received signals before and after code-matched filtering were employed to eliminate the effect of the additive white Gaussian noise, and a new mathematical problem was created, a new maximum likelihood method based on the strong law of large number was derived for DOA estimation and array calibration. Computer simulation results prove that the algorithm is effective.

Design of New SAWDQPSK Matched Filter

A new surface acoustic Wave differential quadraphase shift key（SAW DQPSK） spread spectrum （SS） signal matched filter based on the fusion of SS and differential modulation is reported. The design of multi-phase coded SAW matched filter is proposed rather than another design of SAW DQPSK filter, which can cut in a half of the delay time of SAW DQPSK matched filter and SAW fixed delay line（FDL） used for differential demodulation. This breakthrough is made the system largely reduce a size and process much easily. This method can also be feasible in other SAW MPSK matched filter design especially when the modulation phase number is larger than 4. The design example and its experimental results are given.

A MATCHED FILTER BANK BASED DOA ESTIMATION FOR ASYNCHRONOUS MULTIPATH CDMA CHANNELS

In this paper, a Direction Of Arrival (DOA) estimation algorithm is proposed for multiuser signals through uplink asynchronous multipath Code Division Multiple Access (CDMA) channels. The algorithm is based directly on the correlation matrices of matched filter bank outputs of desired user’s multipath signals and it does not require that the elements of base station antenna array outnumber the multipath signals, which is necessary for the conventional sub-space based direction-finding algorithm. Simulation results show that the proposed algorithm estimates the DOA of multipath signals effectively and acceptably. The proposed algorithm has the prominent advantages of low complexity, simpleness and practicality, which make it much more suitable for practical application.

Probability density analysis of SINR in massive MIMO systems with matched filter beamformer

This paper derives an approximate formula for probability density function(PDF) of received signal-to-interference-and-noise ratio(SINR) at user terminal when matched filter(MF) is adopted at a base station(BS).This distribution of SINR can be used to make an analysis of average sum-rate,outage probability,and symbol error rate of massive MIMO downlink with MF at BS.From simulation,it is found that the derived approximate analytical expression for PDF of SINR is consistent with the simulated exact PDF from the definition of SINR in medium-scale and large-scale MIMO systems.

Improving the precision of the keyword-matching pornographic text filtering method using a hybrid model

With the flooding of pornographic information on the Internet, how to keep people away from that offensive information is becoming one of the most important research areas in network information security. Some applications which can block or filter such information are used. Approaches in those systems can be roughly classified into two kinds: metadata based and content based. With the development of distributed technologies, content based filtering technologies will play a more and more important role in filtering systems. Keyword matching is a content based method used widely in harmful text filtering. Experiments to evaluate the recall and precision of the method showed that the precision of the method is not satisfactory, though the recall of the method is rather high. According to the results, a new pornographic text filtering model based on reconfirming is put forward. Experiments showed that the model is practical, has less loss of recall than the single keyword matching method, and has higher precision.

Development of an Accurate Low-cost Ultrasonic Localization System for Autonomous Mobile Robots in Indoor Environments

An accurate low-cost ultrasonic localization system is de- veloped for automated mobile robots in indoor environments, which is essential for automatic navigation of mobile robots with various tasks. Although ultrasenic sensors are more cost-effective than other sensors such as Laser Range Finder （LRF） and vision, but they are inaccurate and directionally ambiguons. First, the matched filter is used to measure the distance accurately. For resolving the computational complexity of the matched filter, a new matched filter algorithm with simple compution is proposed. Then, an ultrasonic localization system is proposed which consists of three ultrasonic receivers and two or mote transmitters for improving position and orientation accuracy was developed. Finally, an extended Kalman filter is designed to estimate both the static and dynamic positions and orientations. Various simu lations and experimental results show that the proposed system is effective.

Science Letters:A new coding scheme in coded ultrasound using staggering repetition interval

The increase of frame rate,though with the potential in a coded ultrasound system,is generally concomitant with the simultaneous transmission of a number of apertures,and in consequence leads to increased cross-talks between different apertures.In view of this,a new coding scheme using staggering repetition interval was proposed.The transmitting signals were constructed by repeating the two(or more) modulated codes using staggering repetition interval,and then allocated to and transmitted simultaneously among different apertures.The decoding process was based on the subsection-matched filter under the assistance of different matched filters for different apertures.At last the outputs of subsection-matched filtering were added together.Staggering changed the positions of cross-correlation(CC) peaks from coinciding,which resulted in an effective reduction of CC.Our theoretical analysis and simulations showed that,the coding scheme can be used to reduce cross-talk,and a good cross-talk reduction will be achieved if the staggering delay is kept in an appropriate range.

Ultra-wideband FMCW ISAR imaging with a large rotation angle based on block-sparse recovery

Ultra-wideband frequency modulated continuous wave （FMCW） radar has the ability to achieve high-range resolution. Combined with the inverse synthetic aperture technique, high azimuth resolution can be realized under a large rotation angle. However, the range-azimuth coupling problem seriously restricts the inverse synthetic aperture radar （ISAR） imaging performance. Based on the turntable model, traditional match-filter-based, range Doppler algorithms （RDAs） and the back projection algorithm （BPA） are investigated. To eliminate the sidelobe effects of traditional algorithms, compressed sensing （CS） is preferred. Considering the block structure of a signal at high resolution, a block-sparsity adaptive matching pursuit algorithm （BSAMP） is proposed. By matching pursuit and backtracking, a signal with unknown sparsity can be recovered accurately by updating the support set iteratively. Finally, several experiments are conducted. In comparison with other algorithms, the results from processing the simulation data, some simple targets, and a complex target indicate the effectiveness and superiority of the proposed algorithm.

Walsh Threshold Matched-Filtering Based Anti-collision for Surface Acoustic Wave Tags

Surface acoustic wave(SAW) tags are truly passive devices and do not contain any intelligence,so the question of multiple read in the reading range comes up.The paper suggests a Walsh matched-filtering method in Walsh field to distinguish the collision tags with a threshold.In advance,the code states with special sequency are selected from large possible states and the sequency variables of these tags are saved in a database.When a few tags are read simultaneously in read range,the received signal is filtered by the known sequency of single tag in database,and then these tags can be distinguished by the filtered result.Proper threshold selection improves operation speed.Experiment proves that this method is useful and reliable.