Underground coal gasification （UCG） is one of the clean technologies to collect heat energy and gases （hydrogen, methane, etc.） in an underground coal seam. It is necessary to further developing environ- mentally ...Underground coal gasification （UCG） is one of the clean technologies to collect heat energy and gases （hydrogen, methane, etc.） in an underground coal seam. It is necessary to further developing environ- mentally friendly UCG system construction. One of the most important UCG＇s problems is underground control of combustion area for efficient gas production, estimation of subsidence and gas leakage to the surface. For this objective, laboratory experiments were conducted according to the UCG model to iden- ti[y the process of combustion cavity development by monitoring the electrical resistivity activity on the coal samples to setup fundamental data for the technology engineering to evaluate combustion area. While burning coal specimens, that had been sampled from various coal deposits, electrical resistivity was monitored. Symmetric four electrodes system （ABMN） of direct and low-frequency current electric resistance method was used for laboratory resistivity measurement of rock samples. Made research and the results suggest that front-end of electro conductivity activity during heating and combusting of coal specimen depended on heating temperature. Combusting coal electro conductivity has compli- cated multistage type of change. Electrical resistivity method is expected to be a useful geophysical tool to for evaluation of combustion volume and its migration in the coal seam.展开更多
To meet the requirement of high-quality transmission of videos captured by unmanned aerial vehicles （UAV） with low bandwidth, a novel rate control （RC） scheme based on region-of-interest （ROI） is proposed. First...To meet the requirement of high-quality transmission of videos captured by unmanned aerial vehicles （UAV） with low bandwidth, a novel rate control （RC） scheme based on region-of-interest （ROI） is proposed. First, the ROI information is sent to the encoder with the latest high efficient video coding （HEVC） standard to generate an ROI map. Then, by using the ROI map, bit allocation methods are developed at frame level and large coding unit （LCU） level, to avoid inaccurate bit allocation produced by camera movement. At last, by using a better robustness R-2 model, the quantization parameter （QP） for each LCU is calculated. The experimental results show that the proposed RC method can get a lower bitrate error and a higher quality for reconstructed video by choosing appropriate pixel weight on the HEVC platform.展开更多
基金provided by the Ministry of EducationScience of Russian Federation (No. P1679),Far Eastern Federal University
文摘Underground coal gasification （UCG） is one of the clean technologies to collect heat energy and gases （hydrogen, methane, etc.） in an underground coal seam. It is necessary to further developing environ- mentally friendly UCG system construction. One of the most important UCG＇s problems is underground control of combustion area for efficient gas production, estimation of subsidence and gas leakage to the surface. For this objective, laboratory experiments were conducted according to the UCG model to iden- ti[y the process of combustion cavity development by monitoring the electrical resistivity activity on the coal samples to setup fundamental data for the technology engineering to evaluate combustion area. While burning coal specimens, that had been sampled from various coal deposits, electrical resistivity was monitored. Symmetric four electrodes system （ABMN） of direct and low-frequency current electric resistance method was used for laboratory resistivity measurement of rock samples. Made research and the results suggest that front-end of electro conductivity activity during heating and combusting of coal specimen depended on heating temperature. Combusting coal electro conductivity has compli- cated multistage type of change. Electrical resistivity method is expected to be a useful geophysical tool to for evaluation of combustion volume and its migration in the coal seam.
文摘To meet the requirement of high-quality transmission of videos captured by unmanned aerial vehicles （UAV） with low bandwidth, a novel rate control （RC） scheme based on region-of-interest （ROI） is proposed. First, the ROI information is sent to the encoder with the latest high efficient video coding （HEVC） standard to generate an ROI map. Then, by using the ROI map, bit allocation methods are developed at frame level and large coding unit （LCU） level, to avoid inaccurate bit allocation produced by camera movement. At last, by using a better robustness R-2 model, the quantization parameter （QP） for each LCU is calculated. The experimental results show that the proposed RC method can get a lower bitrate error and a higher quality for reconstructed video by choosing appropriate pixel weight on the HEVC platform.
