Bacillus mucilaginosus was used in pretreatment ofpyrolusite to facilitate the flotation removal of quartz from pyrolusite minerals. Quartz was activated by B. mucilaginosus, whereas pyrolusite was unaffected at pH 7 ...Bacillus mucilaginosus was used in pretreatment ofpyrolusite to facilitate the flotation removal of quartz from pyrolusite minerals. Quartz was activated by B. mucilaginosus, whereas pyrolusite was unaffected at pH 7 with laurylamine as collector. Flotation recovery of pyrolusite with B. mucilaginosus pretreatment is 73.62%, slightly lower than that of the process without biopretreament, namely 74.70%. The grade of concentrate of recovered pyrolusite is 19.44%, 2.18% higher than that of the recovered pyrolusite without B. mucilaginosus pretreatment （17.26%）. The results of FTIR and SEM showed that no bacteria were adsorbed on the surface of quartz or pyrolusite, indicating that the better selectivity and collectability of flotation resulted from bacterial byproducts. And interaction of bacterial byproducts such as extracellular bacterial polysaccharide, extracellular bacterial protein and acetic acid, on minerals were studied by FTIR and adsorption.展开更多
Carboxymethyl cellulose(CMC)was introduced as a depressant in reverse flotation separation of quartz from magnesite.The flotation behavior and surface properties of magnesite and quartz exposed to CMC were studied by ...Carboxymethyl cellulose(CMC)was introduced as a depressant in reverse flotation separation of quartz from magnesite.The flotation behavior and surface properties of magnesite and quartz exposed to CMC were studied by zeta potential tests,atomic force microscopy imaging and contact angle measurements.The addition of CMC as the depressant in reverse flotation using dodecylamine(DDA)as the collector exhibited a selectively depressive performance towards magnesite and achieved an improved recovery of magnesite.The study of surface properties demonstrated that CMC and DDA exhibited different adsorption strengths on the surface of magnesite and quartz.It was found that the adsorption of CMC on magnesite surface was stronger than that of DDA,which hindered the subsequent adsorption of DDA on magnesite surface.On the contrary,the quartz surface was strongly adsorbed by DDA instead of CMC,which proved that the addition of CMC did not influence the flotation of quartz.展开更多
Chemical conditioning was used to modify the triboelectrification of coal and mineral particles.The chemicals tested included starch,lignin,kerosene,ethanol,acetic acid,salicylic acid,sodium oleate,Sodium Hexametaphos...Chemical conditioning was used to modify the triboelectrification of coal and mineral particles.The chemicals tested included starch,lignin,kerosene,ethanol,acetic acid,salicylic acid,sodium oleate,Sodium Hexametaphosphate(SH),sodium silicate, Sodium Dodecylbenzenesulfonate(SDBS),Sodium Bicarbonate(SB) and ammonia.A high-speed,dry mixing method was employed.The charge-to-mass ratio of the coal and mineral samples,both untreated and treated,was tested using a Faraday cup. Dielectric constants were determined by measuring capacitance.It is found that the selectivity of the additives toward coal or minerals is not consistent.Salicylic acid is the optimal additive to enhance the triboelectrification performance of coal samples.Starch, lignin and sodium oleate are suitable for removal of pyrite.SH,sodium silicate,SDBS,SB and ammonia are suitable additives for the removal of ash-forming minerals.展开更多
The flotation separation of scheelite from fluorite and calcite using dodecyltrimethylammonium chloride （DTAC）, dodecyldimethylbenzylammonium chloride （DDBAC）, or didodecyldimethylammonium chloride （DDDAC） as th...The flotation separation of scheelite from fluorite and calcite using dodecyltrimethylammonium chloride （DTAC）, dodecyldimethylbenzylammonium chloride （DDBAC）, or didodecyldimethylammonium chloride （DDDAC） as the collector has been investigated. The results show that the selectivity of these collectors for these three calcareous minerals falls in the order： DDDAC 〉 DDBAC 〉 DTAC. A significantly different flotation response of scheelite compared to the other two calcareous minerals was observed over the pH range from 7 to 8 for DDDAC as the collector. A concentrate containing 41.40% W03 could be produced from a feed mixture containing 23.22% WO3 at the DDDAC concentration of 4.0× 10^-4 mol/L. The WO3 recovery was 92.92% under these conditions. The results of zeta potential measurements suggest that electrostatic interactions are the main forces between DDDAC and the minerals. When the concentration of DDDAC is from 2× 10^-4 to 4×10-3 mol/L large differences in adsorption density, and adsorption kinetics, of DDDAC onto scheelite, calcite, and fluorite provide desirable conditions for achieving high selectivity.展开更多
In order to investigate the effect of butanol on quartz flotation when N-dodecyl ethylenediamine(ND)was used as collector, single mineral flotation and artificial mixed mineral(hematite and quartz were mixed at a mass...In order to investigate the effect of butanol on quartz flotation when N-dodecyl ethylenediamine(ND)was used as collector, single mineral flotation and artificial mixed mineral(hematite and quartz were mixed at a mass ratio of 3:2) separation were conducted in the laboratory. Experimental results indicated that addition of butanol could improve the collecting performance of ND on quartz and enhance the floatability of quartz. Best flotation recovery of quartz was obtained when butanol was mixed with ND at a mass ratio of 1:1. Moreover, the molecular structure of alcohols had a significant effect on mineral recovery. Best separation efficiency could be obtained when tert-butanol was added as it had the largest cross-sectional area. Zeta potential measurements indicated that alcohols could strengthen electrostatic adsorption between quartz and collector. Molecular dynamic simulations revealed that co-adsorption of alcohols along with ND had taken place on the quartz surface, and ND/tert-butyl combinations were more easily absorbed on the quartz surface.展开更多
基金Projects(21176026,21176242)supported by the National Natural Science Foundation of ChinaProject(2012AA062401)supported bythe Hi-tech Research and Development Program of China
文摘Bacillus mucilaginosus was used in pretreatment ofpyrolusite to facilitate the flotation removal of quartz from pyrolusite minerals. Quartz was activated by B. mucilaginosus, whereas pyrolusite was unaffected at pH 7 with laurylamine as collector. Flotation recovery of pyrolusite with B. mucilaginosus pretreatment is 73.62%, slightly lower than that of the process without biopretreament, namely 74.70%. The grade of concentrate of recovered pyrolusite is 19.44%, 2.18% higher than that of the recovered pyrolusite without B. mucilaginosus pretreatment （17.26%）. The results of FTIR and SEM showed that no bacteria were adsorbed on the surface of quartz or pyrolusite, indicating that the better selectivity and collectability of flotation resulted from bacterial byproducts. And interaction of bacterial byproducts such as extracellular bacterial polysaccharide, extracellular bacterial protein and acetic acid, on minerals were studied by FTIR and adsorption.
基金the financial support from the National Natural Science Foundation of China(No.51774041)。
文摘Carboxymethyl cellulose(CMC)was introduced as a depressant in reverse flotation separation of quartz from magnesite.The flotation behavior and surface properties of magnesite and quartz exposed to CMC were studied by zeta potential tests,atomic force microscopy imaging and contact angle measurements.The addition of CMC as the depressant in reverse flotation using dodecylamine(DDA)as the collector exhibited a selectively depressive performance towards magnesite and achieved an improved recovery of magnesite.The study of surface properties demonstrated that CMC and DDA exhibited different adsorption strengths on the surface of magnesite and quartz.It was found that the adsorption of CMC on magnesite surface was stronger than that of DDA,which hindered the subsequent adsorption of DDA on magnesite surface.On the contrary,the quartz surface was strongly adsorbed by DDA instead of CMC,which proved that the addition of CMC did not influence the flotation of quartz.
基金supported by the National Natural Science Foundation of China(No. 50921002)the Key Laboratory of Coal Processing and Efficient Utilization,the Ministry of Education of China(No.CPEUKF08-05).
文摘Chemical conditioning was used to modify the triboelectrification of coal and mineral particles.The chemicals tested included starch,lignin,kerosene,ethanol,acetic acid,salicylic acid,sodium oleate,Sodium Hexametaphosphate(SH),sodium silicate, Sodium Dodecylbenzenesulfonate(SDBS),Sodium Bicarbonate(SB) and ammonia.A high-speed,dry mixing method was employed.The charge-to-mass ratio of the coal and mineral samples,both untreated and treated,was tested using a Faraday cup. Dielectric constants were determined by measuring capacitance.It is found that the selectivity of the additives toward coal or minerals is not consistent.Salicylic acid is the optimal additive to enhance the triboelectrification performance of coal samples.Starch, lignin and sodium oleate are suitable for removal of pyrite.SH,sodium silicate,SDBS,SB and ammonia are suitable additives for the removal of ash-forming minerals.
基金supported by the State Key Program of National Natural Science Foundation of China (No. 50834006)
文摘The flotation separation of scheelite from fluorite and calcite using dodecyltrimethylammonium chloride （DTAC）, dodecyldimethylbenzylammonium chloride （DDBAC）, or didodecyldimethylammonium chloride （DDDAC） as the collector has been investigated. The results show that the selectivity of these collectors for these three calcareous minerals falls in the order： DDDAC 〉 DDBAC 〉 DTAC. A significantly different flotation response of scheelite compared to the other two calcareous minerals was observed over the pH range from 7 to 8 for DDDAC as the collector. A concentrate containing 41.40% W03 could be produced from a feed mixture containing 23.22% WO3 at the DDDAC concentration of 4.0× 10^-4 mol/L. The WO3 recovery was 92.92% under these conditions. The results of zeta potential measurements suggest that electrostatic interactions are the main forces between DDDAC and the minerals. When the concentration of DDDAC is from 2× 10^-4 to 4×10-3 mol/L large differences in adsorption density, and adsorption kinetics, of DDDAC onto scheelite, calcite, and fluorite provide desirable conditions for achieving high selectivity.
基金financial support of the National Natural Science Foundation of China (No.51374051)the Fundamental Research Fund for the Central Universities (No.N130401008)
文摘In order to investigate the effect of butanol on quartz flotation when N-dodecyl ethylenediamine(ND)was used as collector, single mineral flotation and artificial mixed mineral(hematite and quartz were mixed at a mass ratio of 3:2) separation were conducted in the laboratory. Experimental results indicated that addition of butanol could improve the collecting performance of ND on quartz and enhance the floatability of quartz. Best flotation recovery of quartz was obtained when butanol was mixed with ND at a mass ratio of 1:1. Moreover, the molecular structure of alcohols had a significant effect on mineral recovery. Best separation efficiency could be obtained when tert-butanol was added as it had the largest cross-sectional area. Zeta potential measurements indicated that alcohols could strengthen electrostatic adsorption between quartz and collector. Molecular dynamic simulations revealed that co-adsorption of alcohols along with ND had taken place on the quartz surface, and ND/tert-butyl combinations were more easily absorbed on the quartz surface.
