A plastic plate with surface micro features was injection molded to investigate the effect of pressure rise of melt on the replication of the micro structures. Prism pattern, which is used in many optical applications...A plastic plate with surface micro features was injection molded to investigate the effect of pressure rise of melt on the replication of the micro structures. Prism pattern, which is used in many optical applications, was selected as a model pattern. The prism pattern is 50 μm in pitch and 108° in the vertical angle. The overall size of the plate was 335 minx213 mm and the thickness of the plate varied linearly from 2.6 mm to 0.7 ram. The prism pattern was firstly machined on the nickel plated core block using micro diamond tool and this machined pattern core was installed in a mold for injection molding of prism patterned plate. Polymethyl methacrylate （PMMA） was used as a molding material. The pressure and temperature of the melt in the cavity were measured at different positions in the cavity and the replication of the pattern was also measured at the same positions. The results show that the pressure or temperature profile through the process depends on the shape and the size of the plate. The replication is affected by the temperature and pressure profiles at the early stage of filling, which is right after the melt reaches the position to be measured.展开更多
An analytic closed-form based loop compensator for direct current-direct current （DC-DC） buckboost converter in discontinuous conduction with peak current-mode control is proposed to increase efficiency of the desir...An analytic closed-form based loop compensator for direct current-direct current （DC-DC） buckboost converter in discontinuous conduction with peak current-mode control is proposed to increase efficiency of the desired process through systemization. As a result, the process saves a lot of computation time that can be translated into design cost savings. Finally, the output voltage regulation in the presence of audio susceptibility and output impedance is shown for verifying.展开更多
This paper presents a new ZVT （zero-voltage transition） single-stage ac-to-dc converter using PWM （pulse width modulation） and HF （high frequency） transformer isolation with capacitive output filter. In this con...This paper presents a new ZVT （zero-voltage transition） single-stage ac-to-dc converter using PWM （pulse width modulation） and HF （high frequency） transformer isolation with capacitive output filter. In this converter a front-end power factor corrected boost stage integrates with a cascaded dc-to-dc bridge HF converter. The front-end boost converter operates in discontinuous current mode and ensures natural power factor correction with very simple control. The auxiliary circuit of this topology deals with very small power and is placed out of the main power path. As a result, the auxiliary circuit components have smaller power rating as opposed to main converter components. Also, output rectifier voltage is clamped to output voltage due to capacitive output filter. Identification and analyses of different operating modes of this converter are presented. Based on these analyses design example of a 50 kHz, 48 V, 1 kW ac-to-dc converter is presented. PSPICE simulation results of the designed converter are presented and explained to verify the performance of this converter.展开更多
基金Project supported by Development of Large Surface Micro-Machining System Technology of Ministry of Knowledge Economy, Korea
文摘A plastic plate with surface micro features was injection molded to investigate the effect of pressure rise of melt on the replication of the micro structures. Prism pattern, which is used in many optical applications, was selected as a model pattern. The prism pattern is 50 μm in pitch and 108° in the vertical angle. The overall size of the plate was 335 minx213 mm and the thickness of the plate varied linearly from 2.6 mm to 0.7 ram. The prism pattern was firstly machined on the nickel plated core block using micro diamond tool and this machined pattern core was installed in a mold for injection molding of prism patterned plate. Polymethyl methacrylate （PMMA） was used as a molding material. The pressure and temperature of the melt in the cavity were measured at different positions in the cavity and the replication of the pattern was also measured at the same positions. The results show that the pressure or temperature profile through the process depends on the shape and the size of the plate. The replication is affected by the temperature and pressure profiles at the early stage of filling, which is right after the melt reaches the position to be measured.
文摘An analytic closed-form based loop compensator for direct current-direct current （DC-DC） buckboost converter in discontinuous conduction with peak current-mode control is proposed to increase efficiency of the desired process through systemization. As a result, the process saves a lot of computation time that can be translated into design cost savings. Finally, the output voltage regulation in the presence of audio susceptibility and output impedance is shown for verifying.
文摘This paper presents a new ZVT （zero-voltage transition） single-stage ac-to-dc converter using PWM （pulse width modulation） and HF （high frequency） transformer isolation with capacitive output filter. In this converter a front-end power factor corrected boost stage integrates with a cascaded dc-to-dc bridge HF converter. The front-end boost converter operates in discontinuous current mode and ensures natural power factor correction with very simple control. The auxiliary circuit of this topology deals with very small power and is placed out of the main power path. As a result, the auxiliary circuit components have smaller power rating as opposed to main converter components. Also, output rectifier voltage is clamped to output voltage due to capacitive output filter. Identification and analyses of different operating modes of this converter are presented. Based on these analyses design example of a 50 kHz, 48 V, 1 kW ac-to-dc converter is presented. PSPICE simulation results of the designed converter are presented and explained to verify the performance of this converter.
