A multi-tube air-lift loop reactor (MT-ALR) is presented in this paper. Based on the energy conservation, a mathematical model describing the liquid circulation flow rate was developed, which was determined by gas vel...A multi-tube air-lift loop reactor (MT-ALR) is presented in this paper. Based on the energy conservation, a mathematical model describing the liquid circulation flow rate was developed, which was determined by gas velocity, the cross areas of riser and downcomer, gas hold-up and the local frictional loss coefficient. The experimental data indicate that either increase of gas flow rate or reduction of the downcomer diameter contributes to higher liquid circulation rate. The correlation between total and the local frictional loss coefficients was also established.Effects of gas flowrate in two risers and diameter of downcomer on the liquid circulation rate were examined. The value of total frictional loss coefficient was measured as a function of the cross area of downcomer and independent of the gas flow rate. The calculated results of liquid circulation rates agreed well with the experimental data with an average relative error of 9.6%.展开更多
The plastic deformation simulation of AZ31 magnesium alloy at different elevated temperatures （from 473 to 723 K） was performed on Gleeble-1500 thermal mechanical simulator at the strain rates of 0.01, 0.1, 1, 5 and...The plastic deformation simulation of AZ31 magnesium alloy at different elevated temperatures （from 473 to 723 K） was performed on Gleeble-1500 thermal mechanical simulator at the strain rates of 0.01, 0.1, 1, 5 and 10 s-t and the maximum deformation degree of 80%. The relationship between the flow stress and deformation temperature as well as strain rate was analyzed. The materials parameters and the apparent activation energy were calculated. The constitutive relationship was established with a Zener-Hollomon （Z） parameter. The results show that the flow stress increases with the increase of strain rate at a constant temperature, but it decreases with the increase of deformation temperature at a constant strain rate. The apparent activation energy is estimated to be 129-153 kJ/mol, which is close to that for self-diffusion of magnesium. The established constitutive relationship can reflect the change of flow stress during hot deformation.展开更多
The fluvial process of the Yalu Tsangpo River occurs concurrently with the uplift of the Qinghai-Tibet Plateau.Therefore,the river exhibits unique features in morphology and sediment deposition.Field investigations we...The fluvial process of the Yalu Tsangpo River occurs concurrently with the uplift of the Qinghai-Tibet Plateau.Therefore,the river exhibits unique features in morphology and sediment deposition.Field investigations were performed from 2009–2011and the depth of the interface between the sediment deposits and bed rock was detected with an electromagnetic imaging system(EH4)at 29 cross sections.Sediment deposits were sampled along the Yalu Tsangpo valley from Xietongmen to the Yalu Tsangpo Canyon.The results show that a huge amount of sediment has been deposited in four wide valley sections because the uplift rate in these sections was lower than that in the downstream gorge sections over the past million years.About 518 billion m3of gravel and sand have been stored in the high mountain river valleys,which has changed the V-shaped mountain river valley into a U-shaped wide river valley in the four sections.In the sections with high uplift rates the river bed is incised and has formed gorges and the Yalu Tsangpo Canyon.展开更多
基金Supported by Liaoning Provincial Natural Science Foundation(No.972050).
文摘A multi-tube air-lift loop reactor (MT-ALR) is presented in this paper. Based on the energy conservation, a mathematical model describing the liquid circulation flow rate was developed, which was determined by gas velocity, the cross areas of riser and downcomer, gas hold-up and the local frictional loss coefficient. The experimental data indicate that either increase of gas flow rate or reduction of the downcomer diameter contributes to higher liquid circulation rate. The correlation between total and the local frictional loss coefficients was also established.Effects of gas flowrate in two risers and diameter of downcomer on the liquid circulation rate were examined. The value of total frictional loss coefficient was measured as a function of the cross area of downcomer and independent of the gas flow rate. The calculated results of liquid circulation rates agreed well with the experimental data with an average relative error of 9.6%.
基金Project supported by China-Canada-USA Collaborative Research and Development Project (Magnesium Front End Research and Development (MFERD))
文摘The plastic deformation simulation of AZ31 magnesium alloy at different elevated temperatures （from 473 to 723 K） was performed on Gleeble-1500 thermal mechanical simulator at the strain rates of 0.01, 0.1, 1, 5 and 10 s-t and the maximum deformation degree of 80%. The relationship between the flow stress and deformation temperature as well as strain rate was analyzed. The materials parameters and the apparent activation energy were calculated. The constitutive relationship was established with a Zener-Hollomon （Z） parameter. The results show that the flow stress increases with the increase of strain rate at a constant temperature, but it decreases with the increase of deformation temperature at a constant strain rate. The apparent activation energy is estimated to be 129-153 kJ/mol, which is close to that for self-diffusion of magnesium. The established constitutive relationship can reflect the change of flow stress during hot deformation.
基金supported by the National Natural Science Foundation of China(Grant Nos.41071001,41001008)the Ministry of Science and Technology of China(Grant No.2011DFA20820)
文摘The fluvial process of the Yalu Tsangpo River occurs concurrently with the uplift of the Qinghai-Tibet Plateau.Therefore,the river exhibits unique features in morphology and sediment deposition.Field investigations were performed from 2009–2011and the depth of the interface between the sediment deposits and bed rock was detected with an electromagnetic imaging system(EH4)at 29 cross sections.Sediment deposits were sampled along the Yalu Tsangpo valley from Xietongmen to the Yalu Tsangpo Canyon.The results show that a huge amount of sediment has been deposited in four wide valley sections because the uplift rate in these sections was lower than that in the downstream gorge sections over the past million years.About 518 billion m3of gravel and sand have been stored in the high mountain river valleys,which has changed the V-shaped mountain river valley into a U-shaped wide river valley in the four sections.In the sections with high uplift rates the river bed is incised and has formed gorges and the Yalu Tsangpo Canyon.
