期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
系留气球的升空模拟 被引量:13
1
作者 卢新来 罗明强 +1 位作者 孙聪 武哲 《航空学报》 EI CAS CSCD 北大核心 2006年第5期768-772,共5页
建立了系留气球升空的数学模型,介绍了1个系留气球升空模拟系统的实现方法,提出了单个气球、串式球和混合式3种系留气球设计方案。利用该系统设计了系留气球模型并对其升空过程进行了模拟,和已有相似方案的对比结果,表明了该系统对实际... 建立了系留气球升空的数学模型,介绍了1个系留气球升空模拟系统的实现方法,提出了单个气球、串式球和混合式3种系留气球设计方案。利用该系统设计了系留气球模型并对其升空过程进行了模拟,和已有相似方案的对比结果,表明了该系统对实际系留气球设计有指导作用。 展开更多
关键词 系留气球 升空模拟 系留绳张力 气球设计方案
下载PDF
基于褶皱的平流层浮空器升空结构形变模拟 被引量:4
2
作者 马云鹏 吕明云 +1 位作者 武哲 刘东旭 《北京航空航天大学学报》 EI CAS CSCD 北大核心 2009年第11期1298-1301,共4页
平流层浮空器囊体材料具有非线性、黏弹性、各向异性和不能抗压等特点,起皱现象是在升空膨胀过程中必然会出现的形变状态,褶皱的扩展会影响整个囊体结构的受力状态,改变囊体变形和应力分布.同时,褶皱的存在还会影响囊体结构的动力学行... 平流层浮空器囊体材料具有非线性、黏弹性、各向异性和不能抗压等特点,起皱现象是在升空膨胀过程中必然会出现的形变状态,褶皱的扩展会影响整个囊体结构的受力状态,改变囊体变形和应力分布.同时,褶皱的存在还会影响囊体结构的动力学行为和空间环境下的热力学分布.通过主应力-主应变相结合准则对褶皱区域进行判别,采用修正褶皱单元的本构矩阵方程的方法对褶皱区域进行处理,地面充氦气试验证明了新方法的模拟结果更加接近测试值.从而为平流层浮空器设计提供了一种有效的分析方法. 展开更多
关键词 浮空器 升空模拟 应力分析 应变 结构分析
下载PDF
Vibration test condition for spacecraft lift-off environment 被引量:3
3
作者 ZHU SiYan ZHU LiWen 《Science China(Technological Sciences)》 SCIE EI CAS 2012年第7期1954-1959,共6页
The purpose of the vibration test of spacecrafts is to assess their adaptability to low-frequency vibration environment during lift-off.This paper gives the simulation of the satellite ground vibration test(GVT) and t... The purpose of the vibration test of spacecrafts is to assess their adaptability to low-frequency vibration environment during lift-off.This paper gives the simulation of the satellite ground vibration test(GVT) and the state of the satellite along with rocket during lift-off.The simulation results of these two states are compared on condition that the lateral vibration of satellite/launching vehicle(S/LV) interface is the same.It is shown that the dynamic responses of satellite vertex are totally different.This is because there is angular motion of S/LV interface during lift-off,but in the GVT,the angular motion is restrained.By means of numerical simulation of the lift-off state,the angular motion related to the translation motion of S/LV interface can be determined.Then,using this angular motion as supplementary condition to simulate the vibration test,the calculated dynamic responses of satellite vertex are identical with the lift-off state.It demonstrates that supplementing angular motion condition is an effective method to improve spacecraft ground vibration test more identically with the real lift-off environment.Furthermore,it is useful for the application of the multi-degree-of-freedom shaking table,and provides the basis for test condition requirement. 展开更多
关键词 environment vibration test multi-axis vibration base excitation load identification
原文传递
Numerical simulation of aerodynamic interactions among helicopter rotor,fuselage,engine and body of revolution 被引量:3
4
作者 CAO YiHua WU ZhenLong HUANG JunSen 《Science China(Technological Sciences)》 SCIE EI CAS 2014年第6期1206-1218,共13页
Numerical simulations of helicopter aerodynamic interactions among the main rotor,fuselage,engine inlets/outlets and slung loads of specific geometries have been conducted by very few researchers.In this work,the stea... Numerical simulations of helicopter aerodynamic interactions among the main rotor,fuselage,engine inlets/outlets and slung loads of specific geometries have been conducted by very few researchers.In this work,the steady-state compressible Reynolds-averaged navier-stokes equations are solved to study the aerodynamic interactions among helicopter rotor,fuselage,engine and body of revolution in three cases,namely MI-171V5,ROBIN and UH-60A.In the first case,the downwash flow provided by the rotor of the uniform actuator disc model induces a significant deflection of the airflow velocity.The vortex-shaped distribution and evolution are discussed in detail.The engine can effectively change the overall flow field.The asymmetry of the flow field is observed by using the non-uniform actuator disc model.Qualitative analysis of ROBIN and quantitative computation of UH-60A show a consistent accuracy of the rotating reference frame model for rotor.The blade tip vortex motion of UH-60A is simulated and its radial position prediction is compared to empirical formulas.While performing flow of UH-60A in hover,both the fuselage normal force and rotor lift decrease because of the impact of the body of revolution. 展开更多
关键词 numerical simulation aerodynamic interaction HELICOPTER actuator disc model rotating reference frame model
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部