Microstructure evolution of Ti14 （α＋Ti2Cu） alloy during semi-solid isothermal process at different temperatures was investigated. The results reveal that both the temperature and holding time have effect on the gr...Microstructure evolution of Ti14 （α＋Ti2Cu） alloy during semi-solid isothermal process at different temperatures was investigated. The results reveal that both the temperature and holding time have effect on the grain growth behavior. The grains grow obviously and the degree of globularity increases with the increase of holding time. According to the statistic analysis of experimental data, the grain growth indices are 0.88 and 0.97 at 1 000 ℃ and 1 050 ℃, respectively, which indicates that increasing isothermal temperature would accelerate microstructural evolution.展开更多
A preparation technology of semi-solid metal slurry introducing grain process （IGP） was developed. The effects of processing parameters on the microstructures of the semi-solid A356 Al-alloy slurries were investigat...A preparation technology of semi-solid metal slurry introducing grain process （IGP） was developed. The effects of processing parameters on the microstructures of the semi-solid A356 Al-alloy slurries were investigated, and the formation mechanism and morphology controlling of the spherical primary a（A1） grains were discussed. The results show that when the preparing slurry is 4 kg, IG size is 10 mm, dosage is 3.5% and dumping temperature （DT） is 611-617 ℃, the mean diameter of the primary a（A1） grains in the semi-solid slurries can reach 40-75 μm and the shape factor can reach 0.82-0.89. When the IG size is 10 mm, DT is 613℃and dosage is 2%-4%, the mean diameter can reach 45-82 μm and the shape factors can reach 0.78-0.88. With decreasing DT or increasing dosage properly, the primary α（A1） grain morphology is better. When QR=QA and Rh=Rc, as long as the DT is suitable, excellent semi-solid slurry can be produced. As a result of the IG melting, a large amount of dendritic fragments can become the direct source of the primary a（A1） grains. Meanwhile, many undercooled areas are formed, where abundant primary α（A1） grains are multiplied by heterogeneous nucleation.展开更多
The rate of microstructural coarsening of recrystallisation and partial melting (RAP) and cooling slope (CS) processed materials in the semi-solid state is compared with rates found in the literature.The rate of coars...The rate of microstructural coarsening of recrystallisation and partial melting (RAP) and cooling slope (CS) processed materials in the semi-solid state is compared with rates found in the literature.The rate of coarsening depended on the liquid fraction but RAP route 2014 alloy with 37% liquid coarsened slightly more slowly than the CS route 2014 alloy with a lower liquid fraction of 17%, contrary to expectations.For the CS route, an increase in liquid fraction resulted in faster coarsening.A modified 2014 alloy with Fe, Mn and Zn stripped out of the composition gave a relatively high coarsening rate.The coarsening rate was also relatively high for CS 201 alloy in comparison with either RAP 2014 or CS 2014.Low coarsening rates are thought to be associated with the presence of particles which inhibit the migration of liquid film grain boundaries.This could be the result of pinning or of the liquid film impeding diffusion at the boundary.展开更多
AM60B magnesium alloy was refined by MgCO3 and its microstmcturat evolution was investigated during partial remelting. The results indicate that MgCO3 is an effective grain refiner for AM60B alloy and can decrease the...AM60B magnesium alloy was refined by MgCO3 and its microstmcturat evolution was investigated during partial remelting. The results indicate that MgCO3 is an effective grain refiner for AM60B alloy and can decrease the grain size from 329 pm of the unrefined alloy to 69 μm. A semisolid microstructure with small and spheroidal primary particles can be obtained after being partially remelted. The microstructure evolution can be divided into four steps： the initial rapid coarsening, structure separation, spheroidization and final coarsening. Correspondingly, these four steps result from the phase transformations of β→α, α＋β→L and α→L, α→L and two reverse reactions of α→L and L→α, respectively. One spheroidal primary particle in the semisolid microstmcture usually originates one dendrite in the as-cast microstructure. The variation of primary particle size with holding time does not obey the LSW law, Dt^3-Do^3=Kt, after the semisolid system is in its solid-liquid equilibrium state. Longer heating duration makes the primary particles more globular, but it makes their size larger at the same time.展开更多
The combined effects of equal channel angular pressing (ECAP) and subsequent heating to a semi-solid temperature on the microstructural characteristics of the 7075 aluminum alloy were investigated. The microstructure ...The combined effects of equal channel angular pressing (ECAP) and subsequent heating to a semi-solid temperature on the microstructural characteristics of the 7075 aluminum alloy were investigated. The microstructure is influenced by several parameters including the number of ECAP passes, ECAP route, consequent heating temperature, and holding time. The effects of these parameters on the microstructural characteristics including grain size and shape factor of the 7075 aluminum alloy were studied using experimental tests and Taguchi method. The results indicate that five-pass ECAP in route BA and subsequent isothermal holding at 630 °C for 15 min are more appropriate for achieving a semi-solid microstructure. The processing route and holding time have the highest impact on the grain size while the number of ECAP passes and heating temperature have the least impact on the grain size. Meanwhile, the shape factor is significantly influenced by the processing route, holding time and heating temperature while it is less influenced by the number of ECAP passes.展开更多
Cylindrical samples of Ni-based GH4037 alloy were compressed at solid temperatures(1200,1250 and 1300℃) and semi-solid temperatures(1340,1350,1360,1370 and 1380℃) with different strain rates of 0.01,0.1 and 1 s-1.Hi...Cylindrical samples of Ni-based GH4037 alloy were compressed at solid temperatures(1200,1250 and 1300℃) and semi-solid temperatures(1340,1350,1360,1370 and 1380℃) with different strain rates of 0.01,0.1 and 1 s-1.High temperature deformation behavior and microstructure evolution of GH4037 alloy were investigated.The results indicated that flow stress decreased rapidly at semi-solid temperatures compared to that at solid temperatures.Besides,the flow stress continued to increase after reaching the initial peak stress at semi-solid temperatures when the strain rate was 1 s-1.With increasing the deformation temperature,the size of initial solid grains and recrystallized grains increased.At semi-solid temperatures,the grains were equiaxed,and liquid phase existed at the grain boundaries and inside the grains.Discontinuous dynamic recrystallization(DDRX) characterized by grain boundary bulging was the main nucleation mechanism for GH4037 alloy.展开更多
基金Projects (2005CCA06400, 2007CB613807) supported by the National Basic Research Program of China Project (CHD2010JC115) supported by the Special Fund for Basic Scientific Research of Central Colleges,China
文摘Microstructure evolution of Ti14 （α＋Ti2Cu） alloy during semi-solid isothermal process at different temperatures was investigated. The results reveal that both the temperature and holding time have effect on the grain growth behavior. The grains grow obviously and the degree of globularity increases with the increase of holding time. According to the statistic analysis of experimental data, the grain growth indices are 0.88 and 0.97 at 1 000 ℃ and 1 050 ℃, respectively, which indicates that increasing isothermal temperature would accelerate microstructural evolution.
文摘A preparation technology of semi-solid metal slurry introducing grain process （IGP） was developed. The effects of processing parameters on the microstructures of the semi-solid A356 Al-alloy slurries were investigated, and the formation mechanism and morphology controlling of the spherical primary a（A1） grains were discussed. The results show that when the preparing slurry is 4 kg, IG size is 10 mm, dosage is 3.5% and dumping temperature （DT） is 611-617 ℃, the mean diameter of the primary a（A1） grains in the semi-solid slurries can reach 40-75 μm and the shape factor can reach 0.82-0.89. When the IG size is 10 mm, DT is 613℃and dosage is 2%-4%, the mean diameter can reach 45-82 μm and the shape factors can reach 0.78-0.88. With decreasing DT or increasing dosage properly, the primary α（A1） grain morphology is better. When QR=QA and Rh=Rc, as long as the DT is suitable, excellent semi-solid slurry can be produced. As a result of the IG melting, a large amount of dendritic fragments can become the direct source of the primary a（A1） grains. Meanwhile, many undercooled areas are formed, where abundant primary α（A1） grains are multiplied by heterogeneous nucleation.
基金the UK Engineering and Physical Sciences Research Council (EPSRC Grant GR/M89096) and the University of Leicester for financial support
文摘The rate of microstructural coarsening of recrystallisation and partial melting (RAP) and cooling slope (CS) processed materials in the semi-solid state is compared with rates found in the literature.The rate of coarsening depended on the liquid fraction but RAP route 2014 alloy with 37% liquid coarsened slightly more slowly than the CS route 2014 alloy with a lower liquid fraction of 17%, contrary to expectations.For the CS route, an increase in liquid fraction resulted in faster coarsening.A modified 2014 alloy with Fe, Mn and Zn stripped out of the composition gave a relatively high coarsening rate.The coarsening rate was also relatively high for CS 201 alloy in comparison with either RAP 2014 or CS 2014.Low coarsening rates are thought to be associated with the presence of particles which inhibit the migration of liquid film grain boundaries.This could be the result of pinning or of the liquid film impeding diffusion at the boundary.
基金Project(G2007CB613706) supported by the National Basic Research Program of China
文摘AM60B magnesium alloy was refined by MgCO3 and its microstmcturat evolution was investigated during partial remelting. The results indicate that MgCO3 is an effective grain refiner for AM60B alloy and can decrease the grain size from 329 pm of the unrefined alloy to 69 μm. A semisolid microstructure with small and spheroidal primary particles can be obtained after being partially remelted. The microstructure evolution can be divided into four steps： the initial rapid coarsening, structure separation, spheroidization and final coarsening. Correspondingly, these four steps result from the phase transformations of β→α, α＋β→L and α→L, α→L and two reverse reactions of α→L and L→α, respectively. One spheroidal primary particle in the semisolid microstmcture usually originates one dendrite in the as-cast microstructure. The variation of primary particle size with holding time does not obey the LSW law, Dt^3-Do^3=Kt, after the semisolid system is in its solid-liquid equilibrium state. Longer heating duration makes the primary particles more globular, but it makes their size larger at the same time.
文摘The combined effects of equal channel angular pressing (ECAP) and subsequent heating to a semi-solid temperature on the microstructural characteristics of the 7075 aluminum alloy were investigated. The microstructure is influenced by several parameters including the number of ECAP passes, ECAP route, consequent heating temperature, and holding time. The effects of these parameters on the microstructural characteristics including grain size and shape factor of the 7075 aluminum alloy were studied using experimental tests and Taguchi method. The results indicate that five-pass ECAP in route BA and subsequent isothermal holding at 630 °C for 15 min are more appropriate for achieving a semi-solid microstructure. The processing route and holding time have the highest impact on the grain size while the number of ECAP passes and heating temperature have the least impact on the grain size. Meanwhile, the shape factor is significantly influenced by the processing route, holding time and heating temperature while it is less influenced by the number of ECAP passes.
基金Project(51575127)supported by the National Natural Science Foundation of China
文摘Cylindrical samples of Ni-based GH4037 alloy were compressed at solid temperatures(1200,1250 and 1300℃) and semi-solid temperatures(1340,1350,1360,1370 and 1380℃) with different strain rates of 0.01,0.1 and 1 s-1.High temperature deformation behavior and microstructure evolution of GH4037 alloy were investigated.The results indicated that flow stress decreased rapidly at semi-solid temperatures compared to that at solid temperatures.Besides,the flow stress continued to increase after reaching the initial peak stress at semi-solid temperatures when the strain rate was 1 s-1.With increasing the deformation temperature,the size of initial solid grains and recrystallized grains increased.At semi-solid temperatures,the grains were equiaxed,and liquid phase existed at the grain boundaries and inside the grains.Discontinuous dynamic recrystallization(DDRX) characterized by grain boundary bulging was the main nucleation mechanism for GH4037 alloy.
