Under the high-intensity ultrasonic field,AZ80 magnesium alloy was semi-continuously cast.The effects of ultrasonic intensity on the as-cast microstructures and mechanical properties were investigated.The results show...Under the high-intensity ultrasonic field,AZ80 magnesium alloy was semi-continuously cast.The effects of ultrasonic intensity on the as-cast microstructures and mechanical properties were investigated.The results show that the microstructures of the alloy cast under high-intensity ultrasonic field are fine and uniform,and the grains are equiaxed,rose-shaped or globular with an average size of 257μm.High-intensity field significantly decreases the grain size,changes the morphologies of theβ-Mg17Al12 phases and reduces their area fraction.It is also shown that a proper increase in ultrasonic intensity is helpful to obtain fine,uniform and equiaxed as-cast microstructures.The optimum ultrasonic parameters are that frequency is 20 kHz and ultrasonic intensity is 1 368 W.The mechanical tests show that the mechanical properties of the as-cast AZ80 magnesium alloy billets cast under ultrasonic field are greatly improved,and with increasing the ultrasonic intensity,the mechanical properties of the entire alloy billets are much higher and more uniform than those of the alloy without ultrasonic field.展开更多
Let X and Y be metrizable topological linear spaces. In this paper, the following results are proved. (1) If X and Y are complete, g: X→Y is a point closed u. s. c.,and symmetric process with F(X)=Y,then either F(X) ...Let X and Y be metrizable topological linear spaces. In this paper, the following results are proved. (1) If X and Y are complete, g: X→Y is a point closed u. s. c.,and symmetric process with F(X)=Y,then either F(X) is meager in Y,or else F is an open muRifunction with F(X)=Y. (2) If X is complete, and F: X→Y is a process with a subclosed graph, then F is I s. c.. We also discuss topological multi-homomorphisms between topological linear spaces.展开更多
Let L be a L′evy process with characteristic measureν,which has an absolutely continuous lower bound w.r.t.the Lebesgue measure on Rn.By using Malliavin calculus for jump processes,we investigate Bismut formula,grad...Let L be a L′evy process with characteristic measureν,which has an absolutely continuous lower bound w.r.t.the Lebesgue measure on Rn.By using Malliavin calculus for jump processes,we investigate Bismut formula,gradient estimates and coupling property for the semigroups associated to semilinear SDEs forced by L′evy process L.展开更多
基金Projects(2007CB613701,2007CB613702)supported by the National Basic Research Program of ChinaProjects(50974037,50904018)supported by the National Natural Science Foundation of China+1 种基金Project(NCET-08-0098)supported by New Century Excellent Talents in University of ChinaProjects(N09040902,N090209002)supported by the Special Foundation for Basic Scientific Research of Central Colleges
文摘Under the high-intensity ultrasonic field,AZ80 magnesium alloy was semi-continuously cast.The effects of ultrasonic intensity on the as-cast microstructures and mechanical properties were investigated.The results show that the microstructures of the alloy cast under high-intensity ultrasonic field are fine and uniform,and the grains are equiaxed,rose-shaped or globular with an average size of 257μm.High-intensity field significantly decreases the grain size,changes the morphologies of theβ-Mg17Al12 phases and reduces their area fraction.It is also shown that a proper increase in ultrasonic intensity is helpful to obtain fine,uniform and equiaxed as-cast microstructures.The optimum ultrasonic parameters are that frequency is 20 kHz and ultrasonic intensity is 1 368 W.The mechanical tests show that the mechanical properties of the as-cast AZ80 magnesium alloy billets cast under ultrasonic field are greatly improved,and with increasing the ultrasonic intensity,the mechanical properties of the entire alloy billets are much higher and more uniform than those of the alloy without ultrasonic field.
基金This paper was reported at the 5th National Functional Analysis Conference held at Nanjing in Nov.,1990.
文摘Let X and Y be metrizable topological linear spaces. In this paper, the following results are proved. (1) If X and Y are complete, g: X→Y is a point closed u. s. c.,and symmetric process with F(X)=Y,then either F(X) is meager in Y,or else F is an open muRifunction with F(X)=Y. (2) If X is complete, and F: X→Y is a process with a subclosed graph, then F is I s. c.. We also discuss topological multi-homomorphisms between topological linear spaces.
文摘Let L be a L′evy process with characteristic measureν,which has an absolutely continuous lower bound w.r.t.the Lebesgue measure on Rn.By using Malliavin calculus for jump processes,we investigate Bismut formula,gradient estimates and coupling property for the semigroups associated to semilinear SDEs forced by L′evy process L.
