以十六烷基三甲基溴化铵(CTAB)表面活性剂和钛酸四丁酯分别为造孔模板和钛源,通过超声辅助溶剂挥发自组装技术制备有序介孔氧化钛(ordered mesoporous Ti O2,OMPT)及其活性炭负载体(ordered mesoporous Ti O2/AC,OMPTA).为探讨OMPTA结...以十六烷基三甲基溴化铵(CTAB)表面活性剂和钛酸四丁酯分别为造孔模板和钛源,通过超声辅助溶剂挥发自组装技术制备有序介孔氧化钛(ordered mesoporous Ti O2,OMPT)及其活性炭负载体(ordered mesoporous Ti O2/AC,OMPTA).为探讨OMPTA结构与性能之间的关系,采用超声辅助溶胶-凝胶技术合成了无孔氧化钛/活性炭(nonporous Ti O2/AC,NPTA)负载体,利用热重-差热(TG-DTA)、X射线衍射(XRD)、氮气吸附-解吸、透射电子显微镜(TEM)和紫外漫反射(DRS)等手段对制备材料结构进行表征.以酸性红B(acid red B,ARB)的光催化降解为探针实验,评价OMPTA的光催化性能和使用寿命,提出了孔-孔协同光催化扩增机制,并探讨了催化条件(染料浓度、催化剂浓度和溶液p H)对协同扩增效果的影响.结果表明:相对于纯OMPT,OMPTA具有晶粒生长的高活化能、较小的粒径尺寸和对有序介孔结构的高热稳定性,这归功于活性炭的吸附力和非晶相层对晶粒生长的阻碍作用.由于孔-孔协同光催化扩增效应,导致OMPTA在NPTA、OMPT-AC、OMPT、P25和NPT中具有更高的催化活性.热处理温度强烈影响OMPTA的光催化活性,其中OMPTA-500具有最高的光催化活性,这归功于其具备完善的结晶性、相对高浓度的羟基和Ti3+离子.同时,OMPTA-500在重复使用过程中也具有很高的光催化性能.当使用OMPTA-500为催化剂对ARB降解时,最佳的催化条件为催化剂浓度1 g/L,ARB浓度15 mg/L,p H 5.展开更多
Hydrogenation and ammoniation of SrTiOa （STO）, a normal ultraviolet photocatalyst, were performed by annealing STO（100） in Hz：N2=5%：95% and NH3, respectively, at various temperatures T. It was found that hydroge...Hydrogenation and ammoniation of SrTiOa （STO）, a normal ultraviolet photocatalyst, were performed by annealing STO（100） in Hz：N2=5%：95% and NH3, respectively, at various temperatures T. It was found that hydrogenation at T≥900℃ remarkably enhanced the UV photocatalytic ability of STO, but the visible-light photocatalysis was still unavailable, while ammoniation at T≥800℃ introduced the N doping, resulting in visible-light photocat- alytie activity. Furthermore, when a hydrogenated STO was subjected to ammoniation, the visible-light photocatalytie ability was nearly the same as that of the ammoniated one; but the hydrogenation of an ammoniated one significantly enhanced visible-light photoeatalysis, indicating a synergetic effect of hydrogenation and ammoniation. Discussions and identifications have been made to analyze these results.展开更多
N-K2Ti4O9/UiO-66-NH2 composites synthesized by a facile solvothermal method have a core-shell structure with UiO-66-NH2 forming the shell around a N-K2Ti4O9 core.Their photocatalytic activities in the degradation of d...N-K2Ti4O9/UiO-66-NH2 composites synthesized by a facile solvothermal method have a core-shell structure with UiO-66-NH2 forming the shell around a N-K2Ti4O9 core.Their photocatalytic activities in the degradation of dyes under visible light irradiation were investigated.The N-K2Ti4O9/UiO-66-NH2 composites exhibited higher photocatalytic activity than the pure components.This synergistic effect was due to the high adsorption capacity of UiO-66-NH2 and that the two components together induced an enhanced separation efficiency of photogenerated electron-hole pairs.The mass ratio of N-K2Ti4O9 to ZrCl4 of 3：7 in the composite exhibited the highest photocatalytic activity.Due to the electrostatic attraction between the negatively charged backbone of UiO-66-NH2with the positively charged groups of cationic dyes,the composites were more photocatalytically active for cationic dyes than for anionic dyes.展开更多
Single-atom Pt catalysts are designed to promote efficient atom utilization,whereas effective decrease of Pt loading and improvement of photocatalytic activity in monoatomic Pt-deposited systems is still ongoing.Atomi...Single-atom Pt catalysts are designed to promote efficient atom utilization,whereas effective decrease of Pt loading and improvement of photocatalytic activity in monoatomic Pt-deposited systems is still ongoing.Atomically dispersed metal species in crystalline carbon nitride are still challenging owing to their high crystallization and structural stability.In this study,we developed a novel single-atomic Pt-Cu catalyst for reducing noble metal loading by combining Pt with earth-abundant Cu atoms and enhancing photocatalytic CO_(2)reduction.N-vacancy-rich crystalline carbon nitride was used as a fine-tuning ligand for isolated Pt-Cu atom dispersion based on its accessible functional N vacancies as the seeded centers.The synthesized dimetal Pt-Cu atoms on crystalline carbon nitride(Pt Cu-cr CN)exhibited high selectivity and activity for CO_(2)conversion without the addition of any cocatalyst or sacrificial agent.In particular,we demonstrated that the diatomic Pt-Cu exhibited high mass activity with only 0.32 wt% Pt loading and showed excellent photocatalytic selectivity toward CH_(4)generation.The mechanism of CO_(2)photoreduction for Pt Cu-cr CN was proposed based on the observations and analysis of aberration-corrected high-angle annular dark-field scanning transmission electron microscopy images,in situ irradiated X-ray photoelectron spectroscopy,and in situ diffuse reflectance infrared Fourier transform spectroscopy.The findings of this work provide insights for abrogating specific bifunctional atomic metal sites in noble metal-based photocatalysts by reducing noble metal loading and maximizing their effective mass activity.展开更多
文摘以十六烷基三甲基溴化铵(CTAB)表面活性剂和钛酸四丁酯分别为造孔模板和钛源,通过超声辅助溶剂挥发自组装技术制备有序介孔氧化钛(ordered mesoporous Ti O2,OMPT)及其活性炭负载体(ordered mesoporous Ti O2/AC,OMPTA).为探讨OMPTA结构与性能之间的关系,采用超声辅助溶胶-凝胶技术合成了无孔氧化钛/活性炭(nonporous Ti O2/AC,NPTA)负载体,利用热重-差热(TG-DTA)、X射线衍射(XRD)、氮气吸附-解吸、透射电子显微镜(TEM)和紫外漫反射(DRS)等手段对制备材料结构进行表征.以酸性红B(acid red B,ARB)的光催化降解为探针实验,评价OMPTA的光催化性能和使用寿命,提出了孔-孔协同光催化扩增机制,并探讨了催化条件(染料浓度、催化剂浓度和溶液p H)对协同扩增效果的影响.结果表明:相对于纯OMPT,OMPTA具有晶粒生长的高活化能、较小的粒径尺寸和对有序介孔结构的高热稳定性,这归功于活性炭的吸附力和非晶相层对晶粒生长的阻碍作用.由于孔-孔协同光催化扩增效应,导致OMPTA在NPTA、OMPT-AC、OMPT、P25和NPT中具有更高的催化活性.热处理温度强烈影响OMPTA的光催化活性,其中OMPTA-500具有最高的光催化活性,这归功于其具备完善的结晶性、相对高浓度的羟基和Ti3+离子.同时,OMPTA-500在重复使用过程中也具有很高的光催化性能.当使用OMPTA-500为催化剂对ARB降解时,最佳的催化条件为催化剂浓度1 g/L,ARB浓度15 mg/L,p H 5.
文摘Hydrogenation and ammoniation of SrTiOa （STO）, a normal ultraviolet photocatalyst, were performed by annealing STO（100） in Hz：N2=5%：95% and NH3, respectively, at various temperatures T. It was found that hydrogenation at T≥900℃ remarkably enhanced the UV photocatalytic ability of STO, but the visible-light photocatalysis was still unavailable, while ammoniation at T≥800℃ introduced the N doping, resulting in visible-light photocat- alytie activity. Furthermore, when a hydrogenated STO was subjected to ammoniation, the visible-light photocatalytie ability was nearly the same as that of the ammoniated one; but the hydrogenation of an ammoniated one significantly enhanced visible-light photoeatalysis, indicating a synergetic effect of hydrogenation and ammoniation. Discussions and identifications have been made to analyze these results.
基金supported by the National Natural Science Foundation of China (51372062)the Anhui Provincial Natural Science Foundation(1508085MB28,1308085MB21)~~
文摘N-K2Ti4O9/UiO-66-NH2 composites synthesized by a facile solvothermal method have a core-shell structure with UiO-66-NH2 forming the shell around a N-K2Ti4O9 core.Their photocatalytic activities in the degradation of dyes under visible light irradiation were investigated.The N-K2Ti4O9/UiO-66-NH2 composites exhibited higher photocatalytic activity than the pure components.This synergistic effect was due to the high adsorption capacity of UiO-66-NH2 and that the two components together induced an enhanced separation efficiency of photogenerated electron-hole pairs.The mass ratio of N-K2Ti4O9 to ZrCl4 of 3：7 in the composite exhibited the highest photocatalytic activity.Due to the electrostatic attraction between the negatively charged backbone of UiO-66-NH2with the positively charged groups of cationic dyes,the composites were more photocatalytically active for cationic dyes than for anionic dyes.
文摘Single-atom Pt catalysts are designed to promote efficient atom utilization,whereas effective decrease of Pt loading and improvement of photocatalytic activity in monoatomic Pt-deposited systems is still ongoing.Atomically dispersed metal species in crystalline carbon nitride are still challenging owing to their high crystallization and structural stability.In this study,we developed a novel single-atomic Pt-Cu catalyst for reducing noble metal loading by combining Pt with earth-abundant Cu atoms and enhancing photocatalytic CO_(2)reduction.N-vacancy-rich crystalline carbon nitride was used as a fine-tuning ligand for isolated Pt-Cu atom dispersion based on its accessible functional N vacancies as the seeded centers.The synthesized dimetal Pt-Cu atoms on crystalline carbon nitride(Pt Cu-cr CN)exhibited high selectivity and activity for CO_(2)conversion without the addition of any cocatalyst or sacrificial agent.In particular,we demonstrated that the diatomic Pt-Cu exhibited high mass activity with only 0.32 wt% Pt loading and showed excellent photocatalytic selectivity toward CH_(4)generation.The mechanism of CO_(2)photoreduction for Pt Cu-cr CN was proposed based on the observations and analysis of aberration-corrected high-angle annular dark-field scanning transmission electron microscopy images,in situ irradiated X-ray photoelectron spectroscopy,and in situ diffuse reflectance infrared Fourier transform spectroscopy.The findings of this work provide insights for abrogating specific bifunctional atomic metal sites in noble metal-based photocatalysts by reducing noble metal loading and maximizing their effective mass activity.
