The most energy-inefficient step in the oxygen evolution reaction(OER), which involves a complicated four-electron transfer process, limits the efficiency of the electrochemical water splitting. Here, well-defined Ni/...The most energy-inefficient step in the oxygen evolution reaction(OER), which involves a complicated four-electron transfer process, limits the efficiency of the electrochemical water splitting. Here, well-defined Ni/Co3O4 nanoparticles coupled with N-doped carbon hybrids(Ni/Co3O4@NC) were synthesized via a facile impregnation-calcination method as efficient electrocatalysts for OER in alkaline media. Notably, the impregnation of the polymer with Ni and Co ions in the first step ensured the homogeneous distribution of metals, thus guaranteeing the subsequent in situ calcination reaction, which produced well-dispersed Ni and Co3O4 nanoparticles. Moreover, the N-doped carbon matrix formed at high temperatures could effectively prevent the aggregation and coalescence, and regulate the electronic configuration of active species. Benefiting from the synergistic effect between the Ni, Co3O4, and NC species, the obtained Ni/Co3O4@NC hybrids exhibited enhanced OER activities and remarkable stability in an alkaline solution with a smaller overpotential of 350 m V to afford 10 m A cm-2, lower Tafel slope of 52.27 m V dec-1, smaller charge-transfer resistance, and higher double-layer capacitance of 25.53 m F cm-2 compared to those of unary Co3O4@NC or Ni@NC metal hybrids. Therefore, this paper presents a facile strategy for designing other heteroatom-doped oxides coupled with ideal carbon materials as electrocatalysts for the OER.展开更多
The development of high efficiency and stable electrocatalysts for oxygen evolution is critical for energy storage and conversion systems. Herein, a series of Co/Fe bimetal-organic frameworks (MOFs) were fabricated us...The development of high efficiency and stable electrocatalysts for oxygen evolution is critical for energy storage and conversion systems. Herein, a series of Co/Fe bimetal-organic frameworks (MOFs) were fabricated using a facile ultrasonic method at room temperature, as electrocatalysts for the oxygen evolution reaction (OER) in alkaline solution. The Co2Fe-MOF exhibited an overpotential of 280 mV at a current density of 10 mA cm^-2, a low Tafel slope of 44.7 mV dec^-1, and long-term stability over 12000 s in 1 mol L^-1 KOH. This impressive performance was attributed to the high charge transfer rate, large specific surface area, and synergistic effects of the cobalt and iron centers.展开更多
There are two theories regarding the origin of the remarkable synergistic effect observed in Au‐Ag bimetallic catalysts when applied to various oxidative reactions. One is based on the importance of the contact inter...There are two theories regarding the origin of the remarkable synergistic effect observed in Au‐Ag bimetallic catalysts when applied to various oxidative reactions. One is based on the importance of the contact interfaces between AgOx regions and the surface of the bulk Au as active working sites, while the other holds that charge transfer from Ag to Au in a surface Au‐Ag alloy causes the catalytic activity. One key point in examining these theories and determining the origin of the synergy in‐volves determining whether or not Ag exists as an oxide or as a metallic alloy on the Au surface. To confirm that enhanced activity results from contact between Ag2O and Au nanoparticles （NPs）, a comparative study of catalytic CO oxidation over Au/Ag2O and Ag2O was performed in the present work, using a closed recirculation reaction system. A reaction mixture consisting of a stoichiometric composition of CO and O2 （CO/O2=2/1） was supplied to both catalysts and the resulting pressure decrease rates were tracked, from which the amounts of gas consumed as well as the quantity of CO2 produced were determined. The steady state reactions of both Au/Ag2O and Ag2O did not lead to any meaningful difference in the rate of pressure decrease during the oxidation. The pressure decrease over both catalysts was attributed to the reduction of surface lattice O on Ag2O by CO. The results obtained for Au/Ag2O are in good agreement with previous data resulting from the use of Ag‐contaminated Au powder （Ag/Au‐b） having an oxidized surfaces. This finding suggests that the perimeters between AgOx zones and the bulk Au surface may not function as active sites during CO oxidation. A review of previous results obtained with Ag/Au‐b specimens having so‐called steady state surfaces indicates that AgOx species in such materials are reduced to the 0 state to form a Ag‐Au alloy that provides the active sites.展开更多
文摘The most energy-inefficient step in the oxygen evolution reaction(OER), which involves a complicated four-electron transfer process, limits the efficiency of the electrochemical water splitting. Here, well-defined Ni/Co3O4 nanoparticles coupled with N-doped carbon hybrids(Ni/Co3O4@NC) were synthesized via a facile impregnation-calcination method as efficient electrocatalysts for OER in alkaline media. Notably, the impregnation of the polymer with Ni and Co ions in the first step ensured the homogeneous distribution of metals, thus guaranteeing the subsequent in situ calcination reaction, which produced well-dispersed Ni and Co3O4 nanoparticles. Moreover, the N-doped carbon matrix formed at high temperatures could effectively prevent the aggregation and coalescence, and regulate the electronic configuration of active species. Benefiting from the synergistic effect between the Ni, Co3O4, and NC species, the obtained Ni/Co3O4@NC hybrids exhibited enhanced OER activities and remarkable stability in an alkaline solution with a smaller overpotential of 350 m V to afford 10 m A cm-2, lower Tafel slope of 52.27 m V dec-1, smaller charge-transfer resistance, and higher double-layer capacitance of 25.53 m F cm-2 compared to those of unary Co3O4@NC or Ni@NC metal hybrids. Therefore, this paper presents a facile strategy for designing other heteroatom-doped oxides coupled with ideal carbon materials as electrocatalysts for the OER.
基金supported by the National Natural Science Foundation of China(21872016)the Fundamental Research Funds for the Central Universities(DUT17ZD204)~~
文摘The development of high efficiency and stable electrocatalysts for oxygen evolution is critical for energy storage and conversion systems. Herein, a series of Co/Fe bimetal-organic frameworks (MOFs) were fabricated using a facile ultrasonic method at room temperature, as electrocatalysts for the oxygen evolution reaction (OER) in alkaline solution. The Co2Fe-MOF exhibited an overpotential of 280 mV at a current density of 10 mA cm^-2, a low Tafel slope of 44.7 mV dec^-1, and long-term stability over 12000 s in 1 mol L^-1 KOH. This impressive performance was attributed to the high charge transfer rate, large specific surface area, and synergistic effects of the cobalt and iron centers.
基金supported by CREST project(Catalyst Design of Gold Clusters through Junction Effect with Metal oxides,Carbons,and Polymers)sponsored by Japan Science and Technology Agency(JST)~~
文摘There are two theories regarding the origin of the remarkable synergistic effect observed in Au‐Ag bimetallic catalysts when applied to various oxidative reactions. One is based on the importance of the contact interfaces between AgOx regions and the surface of the bulk Au as active working sites, while the other holds that charge transfer from Ag to Au in a surface Au‐Ag alloy causes the catalytic activity. One key point in examining these theories and determining the origin of the synergy in‐volves determining whether or not Ag exists as an oxide or as a metallic alloy on the Au surface. To confirm that enhanced activity results from contact between Ag2O and Au nanoparticles （NPs）, a comparative study of catalytic CO oxidation over Au/Ag2O and Ag2O was performed in the present work, using a closed recirculation reaction system. A reaction mixture consisting of a stoichiometric composition of CO and O2 （CO/O2=2/1） was supplied to both catalysts and the resulting pressure decrease rates were tracked, from which the amounts of gas consumed as well as the quantity of CO2 produced were determined. The steady state reactions of both Au/Ag2O and Ag2O did not lead to any meaningful difference in the rate of pressure decrease during the oxidation. The pressure decrease over both catalysts was attributed to the reduction of surface lattice O on Ag2O by CO. The results obtained for Au/Ag2O are in good agreement with previous data resulting from the use of Ag‐contaminated Au powder （Ag/Au‐b） having an oxidized surfaces. This finding suggests that the perimeters between AgOx zones and the bulk Au surface may not function as active sites during CO oxidation. A review of previous results obtained with Ag/Au‐b specimens having so‐called steady state surfaces indicates that AgOx species in such materials are reduced to the 0 state to form a Ag‐Au alloy that provides the active sites.
