This letter presents the design and performance of a multi-channel MAC protocol that supports multiple traffics for IEEE 802.11 mobile ad-hoc networks. The dynamic channel selection scheme by receiver decision is impl...This letter presents the design and performance of a multi-channel MAC protocol that supports multiple traffics for IEEE 802.11 mobile ad-hoc networks. The dynamic channel selection scheme by receiver decision is implemented and the number of the data channel is independent of the network topology. The priority for real-time traffic is assured by the proposed adaptive back off algorithm and different IFS. The protocol is evaluated by simulation and the results have shown that it can support multiple traffics and the performance is better than the performance that IEEE 802.11 standard provides.展开更多
The implementation method of the IEEE 802.11 Medium Access Control (MAC) protocol is mainly based on DSP (Digital Signal Processor)/ ARM (Advanced Reduced instruction set computer Machine) processor or DSP/ARM IP (Int...The implementation method of the IEEE 802.11 Medium Access Control (MAC) protocol is mainly based on DSP (Digital Signal Processor)/ ARM (Advanced Reduced instruction set computer Machine) processor or DSP/ARM IP (Intellectual Property) core. This paper presents a method based on Nios II soft-core processor embedded in Altera’s Cyclone FPGA (Field Programmable Gate Array) and MicroC/OS-II RTOS (Real-Time Operation System). The benefits and drawbacks of above methods are compared, and then the method presented in this paper is described. The hardware and software partitioning are discussed; the hardware architecture is also illustrated and the MAC software programming is described in detail. The presented method has some advantages, such as low cost, easy-implementation and very suitable for the implementation of IEEE 802.11 MAC in research stage.展开更多
As the manufacturing mode focuses more on network and community,the orders and production processes are becoming highly dynamic and unpredictable.The traditional manufacturing system cannot handle those exceptional ev...As the manufacturing mode focuses more on network and community,the orders and production processes are becoming highly dynamic and unpredictable.The traditional manufacturing system cannot handle those exceptional events such as rush orders and machine breakdowns.Nevertheless,the multiagent manufacturing system(MAMS)becomes a critical pattern to deal with these disturbances in a real-time way.However,due to the lack of universality,MAMS is difficult to be applied to industrial sites.A new multiagent architecture and the relay cooperation model based on a positive process relation matrix are proposed to address this paper’s issue.An optimized contract net protocol(CNP)-based negotiation mechanism is developed to improve the efficiency of collaboration in the proposed architecture.Finally,a case study of self-organizing internet of things(Io T)manufacturing system is used to test the feasibility and effectiveness of the method.It is shown that the proposed self-organizing Io T manufacturing mode outperforms the traditional manufacturing system in terms of makespan and critical machine workload balancing under disturbances through comparison.展开更多
The performance of three wireless local-area network(WLAN) media access control(MAC) protocols is investigated and compared in the context of simulcast radioover-fiber-based distributed antenna systems(RoF-DASs) where...The performance of three wireless local-area network(WLAN) media access control(MAC) protocols is investigated and compared in the context of simulcast radioover-fiber-based distributed antenna systems(RoF-DASs) where multiple remote antenna units(RAUs) are connected to one access point(AP) with different-length fiber links.The three WLAN MAC protocols under investigation are distributed coordination function(DCF) in basic access mode,DCF in request/clear to send(RTS/CTS) exchange mode,and point coordination function(PCF).In the analysis,the inter-RAU hidden nodes problems and fiber-length difference effect are both taken into account.Results show that adaptive PCF mechanism has better throughput performances than the other two DCF modes,especially when the inserted fiber length is short.展开更多
This paper proposes a new multi-channel Medium Access Control (MAC) protocol named as Dual Reservation Code Division Multiple Access (CDMA) based MAC protocol with Power Control (DRCPC). The code channel is divided in...This paper proposes a new multi-channel Medium Access Control (MAC) protocol named as Dual Reservation Code Division Multiple Access (CDMA) based MAC protocol with Power Control (DRCPC). The code channel is divided into common channel,broadcast channel and several data chan-nels. And dynamic power control mechanism is implemented to reduce near-far interference. Compared with IEEE 802.11 Distributed Coordination Function (DCF) protocol,the results show that the pro-posed mechanism improves the average throughput and limits the transmission delay efficiently.展开更多
Most existing media access control(MAC) protocols in power line communication(PLC) networks just discard the colliding data packets when collision occurs.The collision deteriorates throughput and delay performance of ...Most existing media access control(MAC) protocols in power line communication(PLC) networks just discard the colliding data packets when collision occurs.The collision deteriorates throughput and delay performance of system under high traffic conditions.This article presents a novel media access scheme with fast collision resolution for in-home power line networks.It works by first recognizing the colliding stations through detecting the inserted unique ID sequence ahead of data packets,then the source nodes retransmitting their packets immediately after the collision slot.The proposed protocol maintains the benefits of ALOHA systems.It needs no scheduling overhead and is suitable for bursty sources,such as multimedia data packets.Computer simulations have demonstrated that this approach can achieve high throughput due to its ability of resolving collisions.展开更多
基金Supported by the"863"project under contract 2001 A A 123016
文摘This letter presents the design and performance of a multi-channel MAC protocol that supports multiple traffics for IEEE 802.11 mobile ad-hoc networks. The dynamic channel selection scheme by receiver decision is implemented and the number of the data channel is independent of the network topology. The priority for real-time traffic is assured by the proposed adaptive back off algorithm and different IFS. The protocol is evaluated by simulation and the results have shown that it can support multiple traffics and the performance is better than the performance that IEEE 802.11 standard provides.
文摘The implementation method of the IEEE 802.11 Medium Access Control (MAC) protocol is mainly based on DSP (Digital Signal Processor)/ ARM (Advanced Reduced instruction set computer Machine) processor or DSP/ARM IP (Intellectual Property) core. This paper presents a method based on Nios II soft-core processor embedded in Altera’s Cyclone FPGA (Field Programmable Gate Array) and MicroC/OS-II RTOS (Real-Time Operation System). The benefits and drawbacks of above methods are compared, and then the method presented in this paper is described. The hardware and software partitioning are discussed; the hardware architecture is also illustrated and the MAC software programming is described in detail. The presented method has some advantages, such as low cost, easy-implementation and very suitable for the implementation of IEEE 802.11 MAC in research stage.
基金supported by the National Key Research and Development Program of China(No.2018YFE0177000)National Natural Science Foundation of China(No.52075257)+1 种基金Equipment Project of Ship Assembly and Construction for the Ministry of Industry and Information Technology(No.TC190H47J)Fundamental Research Funds for the Central Universities(No.NP2020304)。
文摘As the manufacturing mode focuses more on network and community,the orders and production processes are becoming highly dynamic and unpredictable.The traditional manufacturing system cannot handle those exceptional events such as rush orders and machine breakdowns.Nevertheless,the multiagent manufacturing system(MAMS)becomes a critical pattern to deal with these disturbances in a real-time way.However,due to the lack of universality,MAMS is difficult to be applied to industrial sites.A new multiagent architecture and the relay cooperation model based on a positive process relation matrix are proposed to address this paper’s issue.An optimized contract net protocol(CNP)-based negotiation mechanism is developed to improve the efficiency of collaboration in the proposed architecture.Finally,a case study of self-organizing internet of things(Io T)manufacturing system is used to test the feasibility and effectiveness of the method.It is shown that the proposed self-organizing Io T manufacturing mode outperforms the traditional manufacturing system in terms of makespan and critical machine workload balancing under disturbances through comparison.
基金supported in part by National 973 Program(2012CB315705)NSFC Program(61302086,61271042,61107058, 61302016,and 61335002)+2 种基金Specialized Research Fund for the Doctoral Program of Higher Education(20130005120007)Program for New Century Excellent Talents in University(NCET-13-0682)Fundamental Research Funds for the Central Universities
文摘The performance of three wireless local-area network(WLAN) media access control(MAC) protocols is investigated and compared in the context of simulcast radioover-fiber-based distributed antenna systems(RoF-DASs) where multiple remote antenna units(RAUs) are connected to one access point(AP) with different-length fiber links.The three WLAN MAC protocols under investigation are distributed coordination function(DCF) in basic access mode,DCF in request/clear to send(RTS/CTS) exchange mode,and point coordination function(PCF).In the analysis,the inter-RAU hidden nodes problems and fiber-length difference effect are both taken into account.Results show that adaptive PCF mechanism has better throughput performances than the other two DCF modes,especially when the inserted fiber length is short.
基金Supported by the Science Foundation of Shanghai Mu-nicipal Commission of Science and Technology under contract 045115012.
文摘This paper proposes a new multi-channel Medium Access Control (MAC) protocol named as Dual Reservation Code Division Multiple Access (CDMA) based MAC protocol with Power Control (DRCPC). The code channel is divided into common channel,broadcast channel and several data chan-nels. And dynamic power control mechanism is implemented to reduce near-far interference. Compared with IEEE 802.11 Distributed Coordination Function (DCF) protocol,the results show that the pro-posed mechanism improves the average throughput and limits the transmission delay efficiently.
文摘Most existing media access control(MAC) protocols in power line communication(PLC) networks just discard the colliding data packets when collision occurs.The collision deteriorates throughput and delay performance of system under high traffic conditions.This article presents a novel media access scheme with fast collision resolution for in-home power line networks.It works by first recognizing the colliding stations through detecting the inserted unique ID sequence ahead of data packets,then the source nodes retransmitting their packets immediately after the collision slot.The proposed protocol maintains the benefits of ALOHA systems.It needs no scheduling overhead and is suitable for bursty sources,such as multimedia data packets.Computer simulations have demonstrated that this approach can achieve high throughput due to its ability of resolving collisions.
