The static behavior of piezoelectric circular spherical shallow shells under both electrical and mechanical loads is studied by using the differential quadrature element method (DQEM). Geometrical nonlinearity effect ...The static behavior of piezoelectric circular spherical shallow shells under both electrical and mechanical loads is studied by using the differential quadrature element method (DQEM). Geometrical nonlinearity effect is considered. Detailed formulations and procedures are given for the first time. Several examples are analyzed and accurate results are obtained by the DQEM. Based on the results in this paper, one may conclude that the DQEM is a useful tool for obtaining solutions of structural elements. It can be seen that the shell shape may be theore tically controlled and snap through may occur when the applied voltage reaches a critical value even without mechanical load for certain geometric configurations.展开更多
A surface edge element method is proposed and implemented in the study ofelectromagnetic scattering fields of general targets. The basis functions for surfaces of arbitraryshape are derived according to the geometrica...A surface edge element method is proposed and implemented in the study ofelectromagnetic scattering fields of general targets. The basis functions for surfaces of arbitraryshape are derived according to the geometrical properties of each triangular patch. The proposedbasis functions are 3-D linear functions and the tangential components of the vectors are continuousas the traditional edge element method. Combined field integral equations (CFIE) that include bothelectrical field and magnetic field integral equations are used to model the electromagneticscattering of general dielectric targets. Special treatment for singularity is presented to enhancethe quality of numerical solutions. The proposed method is used to compute the scattering fieldsfrom various targets. Numerical results obtained by the proposed method are validated by resultsfrom other numerical methods.展开更多
Let { E i∶i∈I } be a family of Archimedean Riesz algebras.The product of Riesz algebras is denoted by Π i∈I E i .The main result in this paper is the following conclusion:there ...Let { E i∶i∈I } be a family of Archimedean Riesz algebras.The product of Riesz algebras is denoted by Π i∈I E i .The main result in this paper is the following conclusion:there exists a completely regular Hausdorff space X such that Π i∈I E i is Riesz algebra isomorphic to C(X) if and only if for every i∈I there exists a completely regular Hausdorff space X i such that E i is Riesz algebra isomorphic to C(X i) .展开更多
To decipher the sedimentary evolution and environmental changes since the late Last Deglaciation, two gravity cores were analyzed from the western North Yellow Sea (NYS). The two cores (B-L44 and B-U35) were sampled f...To decipher the sedimentary evolution and environmental changes since the late Last Deglaciation, two gravity cores were analyzed from the western North Yellow Sea (NYS). The two cores (B-L44 and B-U35) were sampled for grain size, clay minerals, detrital minerals, and 14C dating. They are comparable in lithofaies, and the observed succession was divided into four depositional units based on lithology and mineral assemblages, which recorded the postglacial transgression. Depositional unit 4 (DU 4) (before 11.5 ka) was characterized with enrichment in sand, and was interpreted as nearshore deposits in shallow water during the Younger Dryas Event. DU 3 (11.5-9.6 ka) displayed a fining-upward succession composed of sediments from local rivers, such as the Huanghe (Yellow) River, and from coastal erosion, which clearly were related to the Early Holocene transgression. Stable muddy deposition (DU 2) in NYS began to form at about 9.6 ka, which received direct supply of fine materials from the Shandong subaqueous clinoform. It is believed that the Yellow Sea circulation system played a major role in controlling the formation of fine sediment deposition in DU 1 (after 6.4 ka) after the sea level maximum.展开更多
The adhesion between the mining machine and the deep-sea sediments will significantly affect the driving performance of the mining machine in the deep-sea environment.When the mining machine and the deep-sea sediment ...The adhesion between the mining machine and the deep-sea sediments will significantly affect the driving performance of the mining machine in the deep-sea environment.When the mining machine and the deep-sea sediment interaction simulation was carried out,the accuracy of the particle interaction parameters will directly affect the simulation results.This study proposed a method to systematically calibrate the interaction parameters between deep-sea sediment and grouser through the combination of experiment and simulation.The uniaxial compression test and macro adhesion test and corresponding discrete element numerical simulation were carried out,modifying the contact parameters until the simulation results are close to the experimental results.Then the micro-parameters of the JKR adhesion contact model were back calibrated with the test results,and the contact parameters between soil particle-soil particle and soil particle-metal are calibrated.Besides,the adhesion test shows that the adhesion forces were ranked in the order of 5052<STi80<TA2<TC4 under the same surface roughness,which indicates the aluminum alloy 5052 has the best anti-adhesion performance.The relationship between surface adhesion force and microscopic contact parameters was studied by discrete element numerical simulation,and the result shows that the coefficient of static friction and the coefficient of rolling friction has little effect on adhesion force.While it is mainly affected by the coefficient of restitution and surface energy,the surface adhesion force tends to decrease with the increase of the coefficient of restitution and increase with the growth of surface energy.The obtained parameters of soil particle to soil particle and soil particle to metal affecting the adhesion can contribute to the design optimization for the grouser of mining machines to decrease surface adhesion and enhance its movability and mining efficiency.展开更多
The δ18O and 8D values of gypsum crystallization water together with δ18O and 834S of sulfates were used as reliable techniques to study source of sulfur and mode of gypsum formation in selected central Iraqi soils....The δ18O and 8D values of gypsum crystallization water together with δ18O and 834S of sulfates were used as reliable techniques to study source of sulfur and mode of gypsum formation in selected central Iraqi soils. Six representative pedons on different geologic units were studied. The slope of 3.9 for δ18O and 8D plot of gypsum crystallization water showed that evaporation was the major process of gypsum deposition in the study area. The mean 834S value of ＋17.58 %0 showed that Cretaceous sea sulfate followed by Tertiary is the source of sulfur in studied soils. The heavier 834S value （＋17.58 %0） of the study area compared to central Iran （＋13.5 %） proved that gypsum in central Iraq soils has been formed in the later stage of evaporation and that Iraqi landforms were cut off from the Tethys seaway after central Iran was evolved.展开更多
The aim of the present study is to develop an efficient weak form quadrature element for free vibration analysis of arbitrarily shaped membranes.The arbitrarily shaped membrane is firstly mapped into a regular domain ...The aim of the present study is to develop an efficient weak form quadrature element for free vibration analysis of arbitrarily shaped membranes.The arbitrarily shaped membrane is firstly mapped into a regular domain using blending functions,and the displacement in the element is assumed as the trigonometric functions.Explicit formulations are worked out for nodes of any type and a varying number of nodes.For verifications,results are compared with exact solutions and data obtained by other numerical methods.It is demonstrated that highly accurate frequencies can be obtained with a small number of nodes by present method.展开更多
To improve energy conversion efficiency, optimization of the working fluids in organic Rankine cycles(ORCs) was explored in the range of low-temperature heat sources. The concept of unit-heat-exchange-area(UHEA) net p...To improve energy conversion efficiency, optimization of the working fluids in organic Rankine cycles(ORCs) was explored in the range of low-temperature heat sources. The concept of unit-heat-exchange-area(UHEA) net power, embodying the cost/performance ratio of an ORC system, was proposed as a new indicator to judge the suitability of ORC working fluids on a given condition. The heat exchange area was computed by an improved evaporator model without fixing the minimum temperature difference between working fluid and hot fluid, and the flow pattern transition during heat exchange was also taken into account. The maximum UHEA net powers obtained show that dry organic fluids are more suitable for ORCs than wet organic fluids to recover low-temperature heat. The organic fluid 1-butene is recommended if the inlet temperature of hot fluid is 353.15-363.15 K or443.15-453.15 K, heptane is more suitable at 373.15-423.15 K, and R245 ca is a good option at 483.15-503.15 K.展开更多
This paper presents an optimization of shadow volume algorithm, which allow a rendering in real-time. This technique is based on previous works which makes it possible to obtain shadows in real-time, although the calc...This paper presents an optimization of shadow volume algorithm, which allow a rendering in real-time. This technique is based on previous works which makes it possible to obtain shadows in real-time, although the calculation of the silhouette requires a pretreatment of the geometry implemented on the CPU （Central Processing Unit）. By using last version of the GPU （Graphic Processing Unit）, the authors propose to implement the calculation of the silhouette on the GPU by using Geometry Shader. The authors present the step which made it possible to lead to a concrete implementation of this algorithm, the modifications which were made, as well as a comparative study of results, followed by a discussion of these results and choices of implementation.展开更多
Suction boxes are used in the paper industry to simultaneously drain a pulp suspension and form a fibre mat （or filter cake）. This research addresses the modelling of fibre deposition in the forming unit of an indus...Suction boxes are used in the paper industry to simultaneously drain a pulp suspension and form a fibre mat （or filter cake）. This research addresses the modelling of fibre deposition in the forming unit of an industrial papermachine, assuming a filtration process, and that of the flowing suspension drained through the building fibre mat and the wire on a suction box. From experimental data of the cumulative drained V volume, per unit surface area, for two vacuum pressures △P and 6 dwell times t, an extension of the classical law （t/V） versus V is proposed, validated and applied. This relation enables determining the average specific filtration resistance of the fibre mat over the box and the mass of solids deposited before and over the suction box. The model obtained is as precise as 1% and can be used to limit and reduce the energy consumption of drainage vacuum assisted devices such as suction boxes in the forming unit of industrial papermachines.展开更多
A novel extended traction boundary element-free method is proposed to analyze the crack problems of two-dimensional infinite magnetoelectroelastic solid.An extended traction boundary integral equation only involving C...A novel extended traction boundary element-free method is proposed to analyze the crack problems of two-dimensional infinite magnetoelectroelastic solid.An extended traction boundary integral equation only involving Cauchy singularity is firstly derived.Then,the extended dislocation densities on the crack surface are expressed as the combination of a characteristic term and unknown weight functions,and the radial point interpolation method is adopted to approximate the unknown weight functions.The numerical scheme of the extended traction boundary element-free method is further established,and an effective numerical procedure is used to evaluate the Cauchy singular integrals.Finally,the stress intensity factor,electric displacement intensity factor and magnetic induction intensity factor are computed for some selected crack problems that contain straight,curved and branched cracks,and good numerical results are obtained.At the same time,the fracture properties of these crack problems are discussed.展开更多
文摘The static behavior of piezoelectric circular spherical shallow shells under both electrical and mechanical loads is studied by using the differential quadrature element method (DQEM). Geometrical nonlinearity effect is considered. Detailed formulations and procedures are given for the first time. Several examples are analyzed and accurate results are obtained by the DQEM. Based on the results in this paper, one may conclude that the DQEM is a useful tool for obtaining solutions of structural elements. It can be seen that the shell shape may be theore tically controlled and snap through may occur when the applied voltage reaches a critical value even without mechanical load for certain geometric configurations.
文摘A surface edge element method is proposed and implemented in the study ofelectromagnetic scattering fields of general targets. The basis functions for surfaces of arbitraryshape are derived according to the geometrical properties of each triangular patch. The proposedbasis functions are 3-D linear functions and the tangential components of the vectors are continuousas the traditional edge element method. Combined field integral equations (CFIE) that include bothelectrical field and magnetic field integral equations are used to model the electromagneticscattering of general dielectric targets. Special treatment for singularity is presented to enhancethe quality of numerical solutions. The proposed method is used to compute the scattering fieldsfrom various targets. Numerical results obtained by the proposed method are validated by resultsfrom other numerical methods.
文摘Let { E i∶i∈I } be a family of Archimedean Riesz algebras.The product of Riesz algebras is denoted by Π i∈I E i .The main result in this paper is the following conclusion:there exists a completely regular Hausdorff space X such that Π i∈I E i is Riesz algebra isomorphic to C(X) if and only if for every i∈I there exists a completely regular Hausdorff space X i such that E i is Riesz algebra isomorphic to C(X i) .
基金Supported by the National Natural Science Foundation of China (Nos.41076032, 40776030)the Special Program 908 on investigation and research of the environment under the sea (No. 908-01-CJ03)
文摘To decipher the sedimentary evolution and environmental changes since the late Last Deglaciation, two gravity cores were analyzed from the western North Yellow Sea (NYS). The two cores (B-L44 and B-U35) were sampled for grain size, clay minerals, detrital minerals, and 14C dating. They are comparable in lithofaies, and the observed succession was divided into four depositional units based on lithology and mineral assemblages, which recorded the postglacial transgression. Depositional unit 4 (DU 4) (before 11.5 ka) was characterized with enrichment in sand, and was interpreted as nearshore deposits in shallow water during the Younger Dryas Event. DU 3 (11.5-9.6 ka) displayed a fining-upward succession composed of sediments from local rivers, such as the Huanghe (Yellow) River, and from coastal erosion, which clearly were related to the Early Holocene transgression. Stable muddy deposition (DU 2) in NYS began to form at about 9.6 ka, which received direct supply of fine materials from the Shandong subaqueous clinoform. It is believed that the Yellow Sea circulation system played a major role in controlling the formation of fine sediment deposition in DU 1 (after 6.4 ka) after the sea level maximum.
基金Project(12072309)supported by the National Natural Science Foundation of ChinaProject(19B546)supported by the Education Department Foundation of Hunan Province,ChinaProject(2019RS1059)supported by the Hunan Innovative Province Construction Project,China。
文摘The adhesion between the mining machine and the deep-sea sediments will significantly affect the driving performance of the mining machine in the deep-sea environment.When the mining machine and the deep-sea sediment interaction simulation was carried out,the accuracy of the particle interaction parameters will directly affect the simulation results.This study proposed a method to systematically calibrate the interaction parameters between deep-sea sediment and grouser through the combination of experiment and simulation.The uniaxial compression test and macro adhesion test and corresponding discrete element numerical simulation were carried out,modifying the contact parameters until the simulation results are close to the experimental results.Then the micro-parameters of the JKR adhesion contact model were back calibrated with the test results,and the contact parameters between soil particle-soil particle and soil particle-metal are calibrated.Besides,the adhesion test shows that the adhesion forces were ranked in the order of 5052<STi80<TA2<TC4 under the same surface roughness,which indicates the aluminum alloy 5052 has the best anti-adhesion performance.The relationship between surface adhesion force and microscopic contact parameters was studied by discrete element numerical simulation,and the result shows that the coefficient of static friction and the coefficient of rolling friction has little effect on adhesion force.While it is mainly affected by the coefficient of restitution and surface energy,the surface adhesion force tends to decrease with the increase of the coefficient of restitution and increase with the growth of surface energy.The obtained parameters of soil particle to soil particle and soil particle to metal affecting the adhesion can contribute to the design optimization for the grouser of mining machines to decrease surface adhesion and enhance its movability and mining efficiency.
文摘The δ18O and 8D values of gypsum crystallization water together with δ18O and 834S of sulfates were used as reliable techniques to study source of sulfur and mode of gypsum formation in selected central Iraqi soils. Six representative pedons on different geologic units were studied. The slope of 3.9 for δ18O and 8D plot of gypsum crystallization water showed that evaporation was the major process of gypsum deposition in the study area. The mean 834S value of ＋17.58 %0 showed that Cretaceous sea sulfate followed by Tertiary is the source of sulfur in studied soils. The heavier 834S value （＋17.58 %0） of the study area compared to central Iran （＋13.5 %） proved that gypsum in central Iraq soils has been formed in the later stage of evaporation and that Iraqi landforms were cut off from the Tethys seaway after central Iran was evolved.
基金supported by the National Natural Science Foundation of China(Nos.52005256,12072154)the Natural Science Foundation of Jiangsu Province(No.BK20190394)+1 种基金the Jiangsu Post-Doctoral Research Funding Program(No.2020Z437)the Priority Academic Program Development of Jiangsu Higher Education Institutions.
文摘The aim of the present study is to develop an efficient weak form quadrature element for free vibration analysis of arbitrarily shaped membranes.The arbitrarily shaped membrane is firstly mapped into a regular domain using blending functions,and the displacement in the element is assumed as the trigonometric functions.Explicit formulations are worked out for nodes of any type and a varying number of nodes.For verifications,results are compared with exact solutions and data obtained by other numerical methods.It is demonstrated that highly accurate frequencies can be obtained with a small number of nodes by present method.
基金Projects(U0937604,50876116)supported by the National Natural Science Foundation of ChinaProjects(2010QZZD0107,2014zzts192)supported by the Fundamental Research Funds for the Central Universities of China
文摘To improve energy conversion efficiency, optimization of the working fluids in organic Rankine cycles(ORCs) was explored in the range of low-temperature heat sources. The concept of unit-heat-exchange-area(UHEA) net power, embodying the cost/performance ratio of an ORC system, was proposed as a new indicator to judge the suitability of ORC working fluids on a given condition. The heat exchange area was computed by an improved evaporator model without fixing the minimum temperature difference between working fluid and hot fluid, and the flow pattern transition during heat exchange was also taken into account. The maximum UHEA net powers obtained show that dry organic fluids are more suitable for ORCs than wet organic fluids to recover low-temperature heat. The organic fluid 1-butene is recommended if the inlet temperature of hot fluid is 353.15-363.15 K or443.15-453.15 K, heptane is more suitable at 373.15-423.15 K, and R245 ca is a good option at 483.15-503.15 K.
文摘This paper presents an optimization of shadow volume algorithm, which allow a rendering in real-time. This technique is based on previous works which makes it possible to obtain shadows in real-time, although the calculation of the silhouette requires a pretreatment of the geometry implemented on the CPU （Central Processing Unit）. By using last version of the GPU （Graphic Processing Unit）, the authors propose to implement the calculation of the silhouette on the GPU by using Geometry Shader. The authors present the step which made it possible to lead to a concrete implementation of this algorithm, the modifications which were made, as well as a comparative study of results, followed by a discussion of these results and choices of implementation.
文摘Suction boxes are used in the paper industry to simultaneously drain a pulp suspension and form a fibre mat （or filter cake）. This research addresses the modelling of fibre deposition in the forming unit of an industrial papermachine, assuming a filtration process, and that of the flowing suspension drained through the building fibre mat and the wire on a suction box. From experimental data of the cumulative drained V volume, per unit surface area, for two vacuum pressures △P and 6 dwell times t, an extension of the classical law （t/V） versus V is proposed, validated and applied. This relation enables determining the average specific filtration resistance of the fibre mat over the box and the mass of solids deposited before and over the suction box. The model obtained is as precise as 1% and can be used to limit and reduce the energy consumption of drainage vacuum assisted devices such as suction boxes in the forming unit of industrial papermachines.
基金supported by the National Natural Science Foundation of China (10772123,11072160)Natural Science Foundation for Outstanding Young People of Hebei Province (A2009001624),China
文摘A novel extended traction boundary element-free method is proposed to analyze the crack problems of two-dimensional infinite magnetoelectroelastic solid.An extended traction boundary integral equation only involving Cauchy singularity is firstly derived.Then,the extended dislocation densities on the crack surface are expressed as the combination of a characteristic term and unknown weight functions,and the radial point interpolation method is adopted to approximate the unknown weight functions.The numerical scheme of the extended traction boundary element-free method is further established,and an effective numerical procedure is used to evaluate the Cauchy singular integrals.Finally,the stress intensity factor,electric displacement intensity factor and magnetic induction intensity factor are computed for some selected crack problems that contain straight,curved and branched cracks,and good numerical results are obtained.At the same time,the fracture properties of these crack problems are discussed.
