Laser-assisted machining has been considered as a new alternative machining method of difficult-to-cut materials. A laser module with one-axis manipulator is developed to focus on preheating laser beam effectively. Fi...Laser-assisted machining has been considered as a new alternative machining method of difficult-to-cut materials. A laser module with one-axis manipulator is developed to focus on preheating laser beam effectively. First of all, the thermal characteristic analysis was performed to verify the importance of laser module location. Laser module should be moved within 1 mm. Analysis conditions of three positions in driving range of the one-axis manipulator are selected. And a C coupling is used as a connection device for spindle and laser module. An initial model has one C coupling, and the number of C coupling has been increased from 1 to 2 in an improved model. And the analysis is carried out again for the one-axis manipulator. The results of the static analysis, the maximum displacement and the maximum stress are decreased by 22% and 11%, respectively, for the improved model when the laser module is located at farthest away from the spindle unit. As a result of the modal analysis, the first natural frequency mode is increased by 13%, 18% and 12% at these positions of the improved model, respectively. The harmonic analysis of the improved model was performed by analyzing the results of the modal analysis. The maximum deformation was 0.33 mm in driving unit at 222 Hz. And the maximum compliance of the ISO axis direction was 0.23 mm/N. Finally, the one-axis manipulator has been fabricated successfully using the analysis result.展开更多
The paper design a double eccentric mass driven spherical robot, the ball is also subject to eccentric force and inertia force that generate by internal drive units in movement. Due to the unique spherical shell, the ...The paper design a double eccentric mass driven spherical robot, the ball is also subject to eccentric force and inertia force that generate by internal drive units in movement. Due to the unique spherical shell, the robot in the dynamic state transition process, Friction cannot offset the robot motion state change due to internal driving motion error of small units. In order to make linear movement of the spherical robot that can smooth start, stop and speed control, the paper design a method for linear motion driven spherical robot with double eccentric mass control. The improved driving eccentric mass of robot total mass ratio is larger, that can provide the eccentric torque and inertia moment more, the robot has higher motion velocity.展开更多
基金Project(2012-0005688) supported by the National Research Foundation of Korea (NRF) Grant funded by the Korea Government (MEST)
文摘Laser-assisted machining has been considered as a new alternative machining method of difficult-to-cut materials. A laser module with one-axis manipulator is developed to focus on preheating laser beam effectively. First of all, the thermal characteristic analysis was performed to verify the importance of laser module location. Laser module should be moved within 1 mm. Analysis conditions of three positions in driving range of the one-axis manipulator are selected. And a C coupling is used as a connection device for spindle and laser module. An initial model has one C coupling, and the number of C coupling has been increased from 1 to 2 in an improved model. And the analysis is carried out again for the one-axis manipulator. The results of the static analysis, the maximum displacement and the maximum stress are decreased by 22% and 11%, respectively, for the improved model when the laser module is located at farthest away from the spindle unit. As a result of the modal analysis, the first natural frequency mode is increased by 13%, 18% and 12% at these positions of the improved model, respectively. The harmonic analysis of the improved model was performed by analyzing the results of the modal analysis. The maximum deformation was 0.33 mm in driving unit at 222 Hz. And the maximum compliance of the ISO axis direction was 0.23 mm/N. Finally, the one-axis manipulator has been fabricated successfully using the analysis result.
文摘The paper design a double eccentric mass driven spherical robot, the ball is also subject to eccentric force and inertia force that generate by internal drive units in movement. Due to the unique spherical shell, the robot in the dynamic state transition process, Friction cannot offset the robot motion state change due to internal driving motion error of small units. In order to make linear movement of the spherical robot that can smooth start, stop and speed control, the paper design a method for linear motion driven spherical robot with double eccentric mass control. The improved driving eccentric mass of robot total mass ratio is larger, that can provide the eccentric torque and inertia moment more, the robot has higher motion velocity.
