期刊文献+
共找到7篇文章
< 1 >
每页显示 20 50 100
单层多晶的EEPROM 被引量:3
1
作者 任涛 刘志弘 朱钧 《微纳电子技术》 CAS 2003年第7期552-556,共5页
针对传统双层多晶EEPROM的诸多不足之处 ,介绍了相对较有潜力的单层多晶的EEP ROM ,主要对比了传统的双层多晶的EEPROM和单层多晶的EEPROM (singlepolyEEPROM ) ,展示了singlepolyEEPROM的应用前景 ,同时提出了singlepolyEEPROM所面临... 针对传统双层多晶EEPROM的诸多不足之处 ,介绍了相对较有潜力的单层多晶的EEP ROM ,主要对比了传统的双层多晶的EEPROM和单层多晶的EEPROM (singlepolyEEPROM ) ,展示了singlepolyEEPROM的应用前景 ,同时提出了singlepolyEEPROM所面临的问题 。 展开更多
关键词 EEPROM 单层多晶 CMOS工艺 三阱工艺 存储器 结构
下载PDF
基于TCAD软件的单层多晶EEPROM器件模拟分析 被引量:2
2
作者 邓勇 宣晓峰 +1 位作者 许高斌 杨明武 《半导体技术》 CAS CSCD 北大核心 2008年第1期15-18,共4页
利用TCAD软件对单层多晶EEPROM器件特性进行了模拟分析,介绍了单层多晶EEPROM存储单元结构与原理的基础,针对TCAD软件中模拟分析单层多晶EEPROM器件特性时存在的困难,提出了一种两个MOS管外加电阻的等效模型来替代单层多晶EEPROM存储单... 利用TCAD软件对单层多晶EEPROM器件特性进行了模拟分析,介绍了单层多晶EEPROM存储单元结构与原理的基础,针对TCAD软件中模拟分析单层多晶EEPROM器件特性时存在的困难,提出了一种两个MOS管外加电阻的等效模型来替代单层多晶EEPROM存储单元结构进行等效模拟。通过编程模拟了单层多晶EEPROM器件性能,模拟分析得到的特性曲线与理论曲线能较好吻合,验证了等效模型方案的可行性。 展开更多
关键词 单层多晶EEPROM TCAD软件 等效模型 器件模拟
下载PDF
一种应用于可编程模拟电路的EEPROM单元
3
作者 张关保 刘文平 唐威 《微电子学与计算机》 CSCD 北大核心 2008年第11期105-108,共4页
为改善传统EEPROM在可编程模拟电路应用中的不足,提出了一种新型的单层多晶EEPROM单元结构,与常见的单层多晶EEPROM结构相比,该结构采用双N阱、附加栅结构实现,与标准数字CMOS工艺兼容,具有写入电流控制准确、阈值电压低的特点.通过对... 为改善传统EEPROM在可编程模拟电路应用中的不足,提出了一种新型的单层多晶EEPROM单元结构,与常见的单层多晶EEPROM结构相比,该结构采用双N阱、附加栅结构实现,与标准数字CMOS工艺兼容,具有写入电流控制准确、阈值电压低的特点.通过对器件的分析及仿真,验证了该结构在模拟电路应用中的有效性. 展开更多
关键词 单层多晶EEPROM 浮栅 FN隧道 附加栅
下载PDF
一种用于模拟电路修调的EEPROM电路 被引量:3
4
作者 季赛健 刘文平 徐俊华 《微电子学与计算机》 CSCD 北大核心 2011年第7期198-201,共4页
介绍了一种用在模拟电路中修调的EEPROM电路.该电路采用一种新型的单层多晶EEPROM结构,与传统的双栅EEPROM结构相比,该结构与数字CMOS工艺兼容,成本低、成品率高.使用在一个基准电压电路中时,其基准电压的调节范围达到±4.82%,调节... 介绍了一种用在模拟电路中修调的EEPROM电路.该电路采用一种新型的单层多晶EEPROM结构,与传统的双栅EEPROM结构相比,该结构与数字CMOS工艺兼容,成本低、成品率高.使用在一个基准电压电路中时,其基准电压的调节范围达到±4.82%,调节精度达到4mV.EEPROM修调电路可广泛应用于各种高精度需求的电路中. 展开更多
关键词 单层多晶EEPROM 数字校调 浮栅 基准电压
下载PDF
一种用于模拟电路测试与修调的方法 被引量:1
5
作者 刘宁 徐东明 赵新毅 《中国集成电路》 2014年第5期69-72,共4页
针对模拟电路中一些基准量的测试与修调,本文提出了一种通过管脚复用技术和单多晶的EEPROM相结合的方法对模拟电路中的基准电压进行了测试与修调,然后通过仿真验证了该方法实现的电路功能。
关键词 管脚复用 测试 修调 单层多晶EEPROM
下载PDF
Laser Multi-layer Cladding Experiment on the DD3 Single Crystal Using FGH95 Powder:Investigation on the Microstructure of Single Crystal Cladding Layer 被引量:4
6
作者 FENG Li-ping HUANG Wei-dong +3 位作者 LIN Xin YANG Hai-ou LI Yan-min Yang Jian 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2002年第2期121-127,共7页
Laser multi\|layer cladding experiments were performed on the substrate of DD3 single crystal with FGH95 powder as cladding material.The solidification microstructure in the sample was investigated.It was found that t... Laser multi\|layer cladding experiments were performed on the substrate of DD3 single crystal with FGH95 powder as cladding material.The solidification microstructure in the sample was investigated.It was found that the solidification microstructure was greatly influenced by the crystallography orientation of the substrate and the local solidification conditions.When the angle between the preferred orientation of the single crystal and the direction of heat flow in the cladding layer is less than 30°,single crystal cladding layers were acquired.Otherwise the crystallography orientation of the cladding layer will deviate from the orientation of the substrate and the microstructure with polycrystalline appears.Meanwhile,even when the experiments were performed on the same preferred crystal surface,the solidification microstructures will be different distinctly resulting from the variation of the local solidification conditions.The secondary arms were degenerated and the primary arm spacing was about 10\|20μm.Further investigation shows that the phases of the cladding layer are mainly made up ofγ,γ′,the flower\|likeγ/γ′eutectic and carbide.The morphology ofγ′was cubical and the size is less than 0.1μm. 展开更多
关键词 laser metal forming directional solidification laser multi-layer cladding single crystal MICROSTRUCTURE composition segregation
下载PDF
Sodium carbonate-assisted synthesis of hierarchically porous single-crystalline nanosized zeolites 被引量:1
7
作者 Xiaoxia Zhou Yu Chen +3 位作者 Tongguang Ge Zile Hua Hangrong Chen Jianlin Shi 《Science Bulletin》 SCIE EI CAS CSCD 2017年第14期1018-1024,共7页
Hierarchically porous single-crystalline nanosized zeolites as heterogeneous catalysts show great poten- tial in fine chemistry because they offer more rich hierarchically porous channels for the mass transfer and mol... Hierarchically porous single-crystalline nanosized zeolites as heterogeneous catalysts show great poten- tial in fine chemistry because they offer more rich hierarchically porous channels for the mass transfer and molecular diffusion. However, the synthesis of hierarchically porous nanosized zeolites generally requires the assistance of templates acting as the mesoporogens, which limits its popularity. Herein, we report a one-pot and template-free synthesis of hierarchically porous single-crystalline nanosized zeolite beta only by introducing sodium carbonate in precursor solution. The resulted sample features the extraordinary properties, including the uniform nanocrystal (200-300 nm), high pore volume (0.65 cm3g 1) and the hierarchical pore-size distribution (e.g., 2-8 and 90-150 nm). After slicing pro- cessing, it is interestingly found that a large number of interconnected mesopores penetrate throughout whole material, which enables the hierarchically porous nanosized zeolite beta remarkably superior cat- alytic activity than the conventional zeolite beta in condensation of henzaldehyde with ethanol at room temperature. More importantly, this one-pot sodium carbonate-assisted synthetic strategy is highly ver- satile, which has also been successfully developed to synthesize hierarchically porous nanosized single- crystalline zeolites ZSM-5 and TS. 展开更多
关键词 Hierarchically porous Single-crystalline Beta/ZSM-5/TS Sodium carbonate Template-free Condensation of benzaldehyde
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部