Nanoparticles monolayer formation by spin coating is considered to be a simple, fast and inexpensive nanopatteming technique However, the parameters that govern the overall growth process in this technique are not com...Nanoparticles monolayer formation by spin coating is considered to be a simple, fast and inexpensive nanopatteming technique However, the parameters that govern the overall growth process in this technique are not completely quantified and techniques for the controlled and continuous growth of close packed monolayer particle arrays without defects need to be developed. In this paper, an ordered particle array formation process is analyzed theoretically, employing material flux balance and parti- cle-subjected forces balance, based on the film thickness model of spin coating and evaporation rate law. A series of experi- ments were conducted using silica particle suspensions with various particle volume fractions and different spin speeds. The results show that the spin speed should match the particle volume fraction to meet the requirements of material flux and particles movement in order to obtain a close packed monolayer film. The formation mechanism of fabrication defects involving particle agglomeration and uncontrollable voids were analyzed qualitatively based on crystal growth theory, and validation experiments were performed. The formation of highly uniform close-packed monolayer films was demonstrated and the condi- tion requirements for achieving monolayer nanoparticles array with good quality presented.展开更多
In this review, we describe the principles of the tunnel junction, self-assembled monolayer （SAM） application techniques, experimental testbed fabrication, and characterization of the films and devices. In addition,...In this review, we describe the principles of the tunnel junction, self-assembled monolayer （SAM） application techniques, experimental testbed fabrication, and characterization of the films and devices. In addition, techniques for directed application, removal, and functionalization of the monolayers are discussed. Bottom-up fabrication techniques have seen increased attention because of their versatility and ease of use. These films see mechanical uses as surface modifiers and micro-scale lubricants. Advances in nanowatt electronics and ultra-low power sensors have opened up an energy harvesting niche for solutions which would have proven ineffective just some years ago. The focus of this study is the two- terminal junction which has potential applications in THz rectification for energy harvesting, medical imaging, and defense sensing. The quantum theory of operation behind these devices is touched on briefly---describing tunneling through the organic monolayers. Commentary on trends in research and potential future work are presented as well.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.51375381,51575427 and 51675422)the 2015 Overall Planning Innovation Project Foundation of Shaanxi Province(Grant No.2015KTCQ01-36)
文摘Nanoparticles monolayer formation by spin coating is considered to be a simple, fast and inexpensive nanopatteming technique However, the parameters that govern the overall growth process in this technique are not completely quantified and techniques for the controlled and continuous growth of close packed monolayer particle arrays without defects need to be developed. In this paper, an ordered particle array formation process is analyzed theoretically, employing material flux balance and parti- cle-subjected forces balance, based on the film thickness model of spin coating and evaporation rate law. A series of experi- ments were conducted using silica particle suspensions with various particle volume fractions and different spin speeds. The results show that the spin speed should match the particle volume fraction to meet the requirements of material flux and particles movement in order to obtain a close packed monolayer film. The formation mechanism of fabrication defects involving particle agglomeration and uncontrollable voids were analyzed qualitatively based on crystal growth theory, and validation experiments were performed. The formation of highly uniform close-packed monolayer films was demonstrated and the condi- tion requirements for achieving monolayer nanoparticles array with good quality presented.
文摘In this review, we describe the principles of the tunnel junction, self-assembled monolayer （SAM） application techniques, experimental testbed fabrication, and characterization of the films and devices. In addition, techniques for directed application, removal, and functionalization of the monolayers are discussed. Bottom-up fabrication techniques have seen increased attention because of their versatility and ease of use. These films see mechanical uses as surface modifiers and micro-scale lubricants. Advances in nanowatt electronics and ultra-low power sensors have opened up an energy harvesting niche for solutions which would have proven ineffective just some years ago. The focus of this study is the two- terminal junction which has potential applications in THz rectification for energy harvesting, medical imaging, and defense sensing. The quantum theory of operation behind these devices is touched on briefly---describing tunneling through the organic monolayers. Commentary on trends in research and potential future work are presented as well.
