The conventional linear quadratic regulator(LQR) control algorithm is one of the most popular active control algorithms.One important issue for LQR control algorithm is the reduction of structure's degrees of free...The conventional linear quadratic regulator(LQR) control algorithm is one of the most popular active control algorithms.One important issue for LQR control algorithm is the reduction of structure's degrees of freedom(DOF). In this work, an LQR control algorithm with superelement model is intended to solve this issue leading to the fact that LQR control algorithm can be used in large finite element(FE) model for structure. In proposed model, the Craig-Bampton(C-B) method, which is one of the component mode syntheses(CMS), is used to establish superelement modeling to reduce structure's DOF and applied to LQR control algorithm to calculate Kalman gain matrix and obtain control forces. And then, the control forces are applied to original structure to simulate the responses of structure by vibration control. And some examples are given. The results show the computational efficiency of proposed model using synthesized models is higher than that of the classical method of LQR control when the DOF of structure is large. And the accuracy of proposed model is well. Meanwhile, the results show that the proposed control has more effects of vibration absorption on the ground structures than underground structures.展开更多
A brilliant purple octahedral single crystal is hydrothermally synthesized by the reaction of CoCl26H2O, H3BO3 and H3PO4 in NaOH aqueous solution of CH3(CH2)15N(CH3)3Br, and its crystal structure has been characterize...A brilliant purple octahedral single crystal is hydrothermally synthesized by the reaction of CoCl26H2O, H3BO3 and H3PO4 in NaOH aqueous solution of CH3(CH2)15N(CH3)3Br, and its crystal structure has been characterized by single-crystal X-ray diffraction. The compound, NaCo(H2O)2BP2O8稨2O (Mr = 336.72), belongs to hexagonal, space group P6122 with a = 9.447(5), c = 15.83(1) , V = 1223(1) 3, Dc = 2.742 g/cm3, Z = 6, F(000) = 1002 and m = 2.606 mm-1. The three-dimensional framework in the compound is built up from the linkage tetrahedral ribbons, in which the BO4 and PO4 tetrahedra alternate with CoO6 octahedra. The sodium ions and water molecules are located within the free thread of the helical ribbons.展开更多
The study of leaves and their architecture evolution is important for understanding the fluid dynamics of water movement in /eaves. Recent studies have shown how these systems can be involved in the performance of phy...The study of leaves and their architecture evolution is important for understanding the fluid dynamics of water movement in /eaves. Recent studies have shown how these systems can be involved in the performance of physiological aspects, which are directly connected with the density of the vascular network and stomata per unit of surface area. The vein architecture, beyond being essential for a mechanical support of the leaf, can also play a crucial role in the efficiency of the photosynthesis. The aim of the present work was to highlight the possible role of leaves vein network as cooling system. The results support the hypothesis that the vascular system of grape leaves is correlated with leaf temperature.展开更多
This paper mainly studies on the biaxial tensile strength and its calculative formula of a special made concrete. According to the Hill theory and the uniaxial tensile experiment results, the expression of the concret...This paper mainly studies on the biaxial tensile strength and its calculative formula of a special made concrete. According to the Hill theory and the uniaxial tensile experiment results, the expression of the concrete biaxial tensile strength is deduced, which is then combined with experiment data and checked. The result shows： the biaxial tensile strength of this kind of concrete is about 15%-30% lower than its uniaxial tensile strength, and the calculative value is basically consistent with the experiment value, with less than 11% difference. This kind of biaxial tension weakening effect is very important to the structure designs of concrete road. The author suggests further research.展开更多
In this thesis, based on the design of a 140＋90m span unusual single tower and single cable plane cable-stayed bridge, fi＇ee vibration characteristics and seismic response are investigated; three dimensional finite ...In this thesis, based on the design of a 140＋90m span unusual single tower and single cable plane cable-stayed bridge, fi＇ee vibration characteristics and seismic response are investigated; three dimensional finite element models of a single tower cable-stayed bridge with and without the pile-soil-strucW.re interaction are established respectively by utilizing finite element software MIDAS/CIVIL, seismic response of Response spectrum and Earthquake schedule are analyzed respectively and compared. By the comparison of the data analysis, for small stiffness span cable-stayed bridge, the pile-soil-structure interaction can not be ignored with calculation and analysis of seismic response.展开更多
Molecular dynamics simulations are employed to study the nanometric machining process of single crystal nickel. Atoms from different machining zones had different atomic crystal structures owing to the differences in ...Molecular dynamics simulations are employed to study the nanometric machining process of single crystal nickel. Atoms from different machining zones had different atomic crystal structures owing to the differences in the actions of the cutting tool. The stacking fault tetrahedral was formed by a series of dislocation reactions, and it maintained the stable structure after the dislocation reactions. In addition, evidence of crystal transition and recovery was found by analyzing the number variations in different types of atoms in the primary shear zone, amorphous region, and crystalline region. The effects of machining speed on the cutting force, chip and subsurface defects, and temperature of the contact zone between the tool and workpiece were investigated. The results suggest that higher the machining speed, larger is the cutting force. The degree of amorphousness of chip atoms and the depth and extent of subsurface defects increase with the machining speed. The average friction coefficient first decreases and then increases with the machining speed because of the temperature difference between the chip and machining surface.展开更多
Alloyed nanoparticles with core-shell structures provide a favorable model to modulate interfacial interaction and surface structures at the atomic level,which is important for designing electrocatalysts with high act...Alloyed nanoparticles with core-shell structures provide a favorable model to modulate interfacial interaction and surface structures at the atomic level,which is important for designing electrocatalysts with high activity and durability.Herein,core-shell structured Pd3M@Pt/C nanoparticles with binary PdM alloy cores(M=Fe,Ni,and Co)and a monolayer Pt shell were successfully synthesized with diverse interfaces.Among these,Pd3Fe@Pt/C exhibited the best oxygen reduction reaction catalytic performance,roughly 5.4 times more than that of the commercial Pt/C catalyst used as reference.The significantly enhanced activity is attributed to the combined effects of strain engineering,interfacial electron transfer,and improved Pt utilization.Density functional theory simulations and extended X-ray absorption fine structure analysis revealed that engineering the alloy core with moderate lattice mismatch and alloy composition(Pd3Fe)optimizes the surface oxygen adsorption energy,thereby rendering excellent electrocatalytic activity.Future researches may use this study as a guide on the construction of highly effective core-shell electrocatalysts for various energy conversions and other applications.展开更多
Aims Subalpine coniferous species are distributed over a wide range of elevations in which they must contend with stressful conditions,such as high elevations and extended periods of darkness.Two evergreen coniferous ...Aims Subalpine coniferous species are distributed over a wide range of elevations in which they must contend with stressful conditions,such as high elevations and extended periods of darkness.Two evergreen coniferous species,Abies veitchii and Abies mariesii,dominate at low and high elevations,respectively,in the subalpine zone,central Japan.The aim of this study is to examine the effects of leaf age,elevation and light conditions on photosynthetic rates through changes in morphological and physiological leaf traits in the two species.Methods We here examined effects of leaf age,elevation and light conditions on photosynthesis,and leaf traits in A.veitchii and A.mariesii.Saplings of the two conifers were sampled in the understory and canopy gaps at their lower(1600 m)and upper(2300 m)distribution limits.Important Findings The two species showed similar responses to leaf age and different responses to elevation and light conditions in photosynthesis and leaf traits.The maximum photosynthetic rate of A.veitchii is correlated negatively with leaf mass per area(LMA)and non-structural carbohydrate(NSC)concentration.LMA increased at high elevations in the two species,whereas NSC concentrations increased only in A.veitchii.Therefore,the maximum photosynthetic rate of A.veitchii decreased at high elevations.Furthermore,maximum photosynthetic rates correlate positively with nitrogen concentration in both species.In the understory,leaf nitrogen concentrations decreased and increased in A.veitchii and A.mariesii,respectively.LMA decreased and the chlorophyll-to-nitrogen ratio increased in understory conditions only for A.mariesii,suggesting it has a higher light-capture efficiency in dark conditions than does A.veitchii.This study concluded that A.mariesii has more shade-tolerant photosynthetic and leaf traits and its photosynthetic rate is less affected by elevation compared with A.veitchii,allowing A.mariesii to survive in the understory and to dominate at high elevations.展开更多
基金Project(LZ2015022)supported by Educational Commission of Liaoning Province of ChinaProjects(51138001,51178081)supported by the National Natural Science Foundation of China+1 种基金Project(2013CB035905)supported by the Basic Research Program of ChinaProjects(DUT15LK34,DUT14QY10)supported by Fundamental Research Funds for the Central Universities,China
文摘The conventional linear quadratic regulator(LQR) control algorithm is one of the most popular active control algorithms.One important issue for LQR control algorithm is the reduction of structure's degrees of freedom(DOF). In this work, an LQR control algorithm with superelement model is intended to solve this issue leading to the fact that LQR control algorithm can be used in large finite element(FE) model for structure. In proposed model, the Craig-Bampton(C-B) method, which is one of the component mode syntheses(CMS), is used to establish superelement modeling to reduce structure's DOF and applied to LQR control algorithm to calculate Kalman gain matrix and obtain control forces. And then, the control forces are applied to original structure to simulate the responses of structure by vibration control. And some examples are given. The results show the computational efficiency of proposed model using synthesized models is higher than that of the classical method of LQR control when the DOF of structure is large. And the accuracy of proposed model is well. Meanwhile, the results show that the proposed control has more effects of vibration absorption on the ground structures than underground structures.
基金NNSFC (No. 20173017) and State Key Basic Program (No. G2000048)
文摘A brilliant purple octahedral single crystal is hydrothermally synthesized by the reaction of CoCl26H2O, H3BO3 and H3PO4 in NaOH aqueous solution of CH3(CH2)15N(CH3)3Br, and its crystal structure has been characterized by single-crystal X-ray diffraction. The compound, NaCo(H2O)2BP2O8稨2O (Mr = 336.72), belongs to hexagonal, space group P6122 with a = 9.447(5), c = 15.83(1) , V = 1223(1) 3, Dc = 2.742 g/cm3, Z = 6, F(000) = 1002 and m = 2.606 mm-1. The three-dimensional framework in the compound is built up from the linkage tetrahedral ribbons, in which the BO4 and PO4 tetrahedra alternate with CoO6 octahedra. The sodium ions and water molecules are located within the free thread of the helical ribbons.
文摘The study of leaves and their architecture evolution is important for understanding the fluid dynamics of water movement in /eaves. Recent studies have shown how these systems can be involved in the performance of physiological aspects, which are directly connected with the density of the vascular network and stomata per unit of surface area. The vein architecture, beyond being essential for a mechanical support of the leaf, can also play a crucial role in the efficiency of the photosynthesis. The aim of the present work was to highlight the possible role of leaves vein network as cooling system. The results support the hypothesis that the vascular system of grape leaves is correlated with leaf temperature.
文摘This paper mainly studies on the biaxial tensile strength and its calculative formula of a special made concrete. According to the Hill theory and the uniaxial tensile experiment results, the expression of the concrete biaxial tensile strength is deduced, which is then combined with experiment data and checked. The result shows： the biaxial tensile strength of this kind of concrete is about 15%-30% lower than its uniaxial tensile strength, and the calculative value is basically consistent with the experiment value, with less than 11% difference. This kind of biaxial tension weakening effect is very important to the structure designs of concrete road. The author suggests further research.
文摘In this thesis, based on the design of a 140＋90m span unusual single tower and single cable plane cable-stayed bridge, fi＇ee vibration characteristics and seismic response are investigated; three dimensional finite element models of a single tower cable-stayed bridge with and without the pile-soil-strucW.re interaction are established respectively by utilizing finite element software MIDAS/CIVIL, seismic response of Response spectrum and Earthquake schedule are analyzed respectively and compared. By the comparison of the data analysis, for small stiffness span cable-stayed bridge, the pile-soil-structure interaction can not be ignored with calculation and analysis of seismic response.
基金supported by the National Natural Science Foundation of China(Grant Nos,51375082)
文摘Molecular dynamics simulations are employed to study the nanometric machining process of single crystal nickel. Atoms from different machining zones had different atomic crystal structures owing to the differences in the actions of the cutting tool. The stacking fault tetrahedral was formed by a series of dislocation reactions, and it maintained the stable structure after the dislocation reactions. In addition, evidence of crystal transition and recovery was found by analyzing the number variations in different types of atoms in the primary shear zone, amorphous region, and crystalline region. The effects of machining speed on the cutting force, chip and subsurface defects, and temperature of the contact zone between the tool and workpiece were investigated. The results suggest that higher the machining speed, larger is the cutting force. The degree of amorphousness of chip atoms and the depth and extent of subsurface defects increase with the machining speed. The average friction coefficient first decreases and then increases with the machining speed because of the temperature difference between the chip and machining surface.
基金the Natural Science Foundation of Hainan Province(2019RC007)the National Natural Science Foundation of China(21805104,21606050,21905056,21905045,and U1801257)+3 种基金the Natural Science Foundation of Guangdong Province(2018A0303130239,2018A0303130223)Pearl River Science and Technology New Star Project(201806010039)the Start-up Research Foundation of Hainan University(KYQD(ZR)1908)Research Fund Program of Key Laboratory of Fuel Cell Technology of Guangdong Province。
文摘Alloyed nanoparticles with core-shell structures provide a favorable model to modulate interfacial interaction and surface structures at the atomic level,which is important for designing electrocatalysts with high activity and durability.Herein,core-shell structured Pd3M@Pt/C nanoparticles with binary PdM alloy cores(M=Fe,Ni,and Co)and a monolayer Pt shell were successfully synthesized with diverse interfaces.Among these,Pd3Fe@Pt/C exhibited the best oxygen reduction reaction catalytic performance,roughly 5.4 times more than that of the commercial Pt/C catalyst used as reference.The significantly enhanced activity is attributed to the combined effects of strain engineering,interfacial electron transfer,and improved Pt utilization.Density functional theory simulations and extended X-ray absorption fine structure analysis revealed that engineering the alloy core with moderate lattice mismatch and alloy composition(Pd3Fe)optimizes the surface oxygen adsorption energy,thereby rendering excellent electrocatalytic activity.Future researches may use this study as a guide on the construction of highly effective core-shell electrocatalysts for various energy conversions and other applications.
基金supported by grants(20292081)from the Ministry of Education,Culture,Sports,Science and Technology,Japan.
文摘Aims Subalpine coniferous species are distributed over a wide range of elevations in which they must contend with stressful conditions,such as high elevations and extended periods of darkness.Two evergreen coniferous species,Abies veitchii and Abies mariesii,dominate at low and high elevations,respectively,in the subalpine zone,central Japan.The aim of this study is to examine the effects of leaf age,elevation and light conditions on photosynthetic rates through changes in morphological and physiological leaf traits in the two species.Methods We here examined effects of leaf age,elevation and light conditions on photosynthesis,and leaf traits in A.veitchii and A.mariesii.Saplings of the two conifers were sampled in the understory and canopy gaps at their lower(1600 m)and upper(2300 m)distribution limits.Important Findings The two species showed similar responses to leaf age and different responses to elevation and light conditions in photosynthesis and leaf traits.The maximum photosynthetic rate of A.veitchii is correlated negatively with leaf mass per area(LMA)and non-structural carbohydrate(NSC)concentration.LMA increased at high elevations in the two species,whereas NSC concentrations increased only in A.veitchii.Therefore,the maximum photosynthetic rate of A.veitchii decreased at high elevations.Furthermore,maximum photosynthetic rates correlate positively with nitrogen concentration in both species.In the understory,leaf nitrogen concentrations decreased and increased in A.veitchii and A.mariesii,respectively.LMA decreased and the chlorophyll-to-nitrogen ratio increased in understory conditions only for A.mariesii,suggesting it has a higher light-capture efficiency in dark conditions than does A.veitchii.This study concluded that A.mariesii has more shade-tolerant photosynthetic and leaf traits and its photosynthetic rate is less affected by elevation compared with A.veitchii,allowing A.mariesii to survive in the understory and to dominate at high elevations.
