基于有限元辅助测试方法(Finite element aided testing,FAT)对新型聚合物PA66开展了直至破坏的全程单轴本构关系的研究。另外,将VIC-3D光测所得的试样表面应变场结果与有限元模拟结果进行对比,表明通过FAT方法获得的聚合物PA66全程单...基于有限元辅助测试方法(Finite element aided testing,FAT)对新型聚合物PA66开展了直至破坏的全程单轴本构关系的研究。另外,将VIC-3D光测所得的试样表面应变场结果与有限元模拟结果进行对比,表明通过FAT方法获得的聚合物PA66全程单轴本构关系结果准确有效。最后给出了聚合物PA66的全程单轴本构关系曲线,给出了对应Chaboche本构关系模型的参数、材料临界破断应力、破断应变、应力三轴度等,并对试样的破断机理进行了分析。展开更多
Bedding structural planes significantly influence the mechanical properties and stability of engineering rock masses.This study conducts uniaxial compression tests on layered sandstone with various bedding angles(0...Bedding structural planes significantly influence the mechanical properties and stability of engineering rock masses.This study conducts uniaxial compression tests on layered sandstone with various bedding angles(0°,15°,30°,45°,60°,75°and 90°)to explore the impact of bedding angle on the deformational mechanical response,failure mode,and damage evolution processes of rocks.It develops a damage model based on the Logistic equation derived from the modulus’s degradation considering the combined effect of the sandstone bedding dip angle and load.This model is employed to study the damage accumulation state and its evolution within the layered rock mass.This research also introduces a piecewise constitutive model that considers the initial compaction characteristics to simulate the whole deformation process of layered sandstone under uniaxial compression.The results revealed that as the bedding angle increases from 0°to 90°,the uniaxial compressive strength and elastic modulus of layered sandstone significantly decrease,slightly increase,and then decline again.The corresponding failure modes transition from splitting tensile failure to slipping shear failure and back to splitting tensile failure.As indicated by the modulus’s degradation,the damage characteristics can be categorized into four stages:initial no damage,damage initiation,damage acceleration,and damage deceleration termination.The theoretical damage model based on the Logistic equation effectively simulates and predicts the entire damage evolution process.Moreover,the theoretical constitutive model curves closely align with the actual stress−strain curves of layered sandstone under uniaxial compression.The introduced constitutive model is concise,with fewer parameters,a straightforward parameter determination process,and a clear physical interpretation.This study offers valuable insights into the theory of layered rock mechanics and holds implications for ensuring the safety of rock engineering.展开更多
In order to establish the constitutive relationship of high-ductility cementitious composites(HDCCs)under uniaxial tensile load and to guide the structural design of HDCCs,based on the analysis of the existing uniaxia...In order to establish the constitutive relationship of high-ductility cementitious composites(HDCCs)under uniaxial tensile load and to guide the structural design of HDCCs,based on the analysis of the existing uniaxial tensile constitutive relationship and ideal elastoplastic linear strain-hardening model,a bilinear tensile constitutive equation of HDCCs was proposed.The points of nominal initial cracking and nominal maximum stress were adopted as control points of the line segment,and the constitutive relationship of HDCCs was established.Five series of uniaxial tensile stress-strain curves of HDCCs were combined to perform an experimental application of the constitutive equation,along with an analysis of the key parameters.The experimental results confirm the ability of the constitutive equation to overcome the problem of insufficient or excessive redundancy of existing models in terms of calculation bearing capacity.Specifically,the measured maximum stress value is larger than the nominal value,and the ratio between the two values ranges from 1.08 to 1.22.Additionally,the tensile strain at the softening point obtained by fitting a straight line with the valley points of the strain-hardening stage curve is greater than or equal to the tensile strain at the measured maximum stress point and the ratio of the fitted values to the measured values ranges from 1.00 to 1.19.展开更多
Abstract： The hot deformation behaviors of AI-Zn-Mg-Sc-Zr alloy were investigated in a temperature range of 340-500℃ and a strain rate range of 0.001-10 s 1 using uniaxial compression test on Gleeble-1500 thermal si...Abstract： The hot deformation behaviors of AI-Zn-Mg-Sc-Zr alloy were investigated in a temperature range of 340-500℃ and a strain rate range of 0.001-10 s 1 using uniaxial compression test on Gleeble-1500 thermal simulation machine. The results show that the flow stress increases with increasing strain and tends to be constant after a peak value. The flow stress increases with increasing strain rate and decreases with increasing deformation temperature. The phenomenon of dynamic recovery and dynamic recrystallization can be observed by microstructural evolutions. Based on the hyperbolic Arrhenius-type equation, the true stress-true strain data from the tests were employed to establish the constitutive equation considering the effect of the true strain on material constants （α, β, Q, n and A）, which reveals the dependence of the flow stress on strain, strain rate and deformation temperature. The predicted stress-strain curves are in good agreement with experimental results, which confirms that the developed constitutive equations are suitable to research the hot deformation behaviors of Al-Zn-Mg-Sc-Zr alloy.展开更多
A multi-scale virtual internal bond (VIB) model for the isotropic materials has been recently proposed to describe the material deformation and fracturing. During the simulation process of material fracturing using VI...A multi-scale virtual internal bond (VIB) model for the isotropic materials has been recently proposed to describe the material deformation and fracturing. During the simulation process of material fracturing using VIB, the fracture criterion is directly built into the constitutive formulation of the material using the cohesive force law. Enlightened by the similarity of the damage constitutive model of rock under uniaxial compression and the cohesive force law of VIB, a VIB density function of rock under uniaxial compression is suggested. The elastic modulus tensor is formulated on the basis of the density function. Thus the complete deformation process of rock under the uniaxial compression is simulated.展开更多
文摘基于有限元辅助测试方法(Finite element aided testing,FAT)对新型聚合物PA66开展了直至破坏的全程单轴本构关系的研究。另外,将VIC-3D光测所得的试样表面应变场结果与有限元模拟结果进行对比,表明通过FAT方法获得的聚合物PA66全程单轴本构关系结果准确有效。最后给出了聚合物PA66的全程单轴本构关系曲线,给出了对应Chaboche本构关系模型的参数、材料临界破断应力、破断应变、应力三轴度等,并对试样的破断机理进行了分析。
基金Projects(52074299,41941018)supported by the National Natural Science Foundation of ChinaProject(2023JCCXSB02)supported by the Fundamental Research Funds for the Central Universities,China。
文摘Bedding structural planes significantly influence the mechanical properties and stability of engineering rock masses.This study conducts uniaxial compression tests on layered sandstone with various bedding angles(0°,15°,30°,45°,60°,75°and 90°)to explore the impact of bedding angle on the deformational mechanical response,failure mode,and damage evolution processes of rocks.It develops a damage model based on the Logistic equation derived from the modulus’s degradation considering the combined effect of the sandstone bedding dip angle and load.This model is employed to study the damage accumulation state and its evolution within the layered rock mass.This research also introduces a piecewise constitutive model that considers the initial compaction characteristics to simulate the whole deformation process of layered sandstone under uniaxial compression.The results revealed that as the bedding angle increases from 0°to 90°,the uniaxial compressive strength and elastic modulus of layered sandstone significantly decrease,slightly increase,and then decline again.The corresponding failure modes transition from splitting tensile failure to slipping shear failure and back to splitting tensile failure.As indicated by the modulus’s degradation,the damage characteristics can be categorized into four stages:initial no damage,damage initiation,damage acceleration,and damage deceleration termination.The theoretical damage model based on the Logistic equation effectively simulates and predicts the entire damage evolution process.Moreover,the theoretical constitutive model curves closely align with the actual stress−strain curves of layered sandstone under uniaxial compression.The introduced constitutive model is concise,with fewer parameters,a straightforward parameter determination process,and a clear physical interpretation.This study offers valuable insights into the theory of layered rock mechanics and holds implications for ensuring the safety of rock engineering.
基金The National Key Research and Development Program of China(No.2018YFC0406701)the National Natural Science Foundation of China(No.51778133,51739008)
文摘In order to establish the constitutive relationship of high-ductility cementitious composites(HDCCs)under uniaxial tensile load and to guide the structural design of HDCCs,based on the analysis of the existing uniaxial tensile constitutive relationship and ideal elastoplastic linear strain-hardening model,a bilinear tensile constitutive equation of HDCCs was proposed.The points of nominal initial cracking and nominal maximum stress were adopted as control points of the line segment,and the constitutive relationship of HDCCs was established.Five series of uniaxial tensile stress-strain curves of HDCCs were combined to perform an experimental application of the constitutive equation,along with an analysis of the key parameters.The experimental results confirm the ability of the constitutive equation to overcome the problem of insufficient or excessive redundancy of existing models in terms of calculation bearing capacity.Specifically,the measured maximum stress value is larger than the nominal value,and the ratio between the two values ranges from 1.08 to 1.22.Additionally,the tensile strain at the softening point obtained by fitting a straight line with the valley points of the strain-hardening stage curve is greater than or equal to the tensile strain at the measured maximum stress point and the ratio of the fitted values to the measured values ranges from 1.00 to 1.19.
基金Project(2012CB619503)supported by National Basic Research Program of China
文摘Abstract： The hot deformation behaviors of AI-Zn-Mg-Sc-Zr alloy were investigated in a temperature range of 340-500℃ and a strain rate range of 0.001-10 s 1 using uniaxial compression test on Gleeble-1500 thermal simulation machine. The results show that the flow stress increases with increasing strain and tends to be constant after a peak value. The flow stress increases with increasing strain rate and decreases with increasing deformation temperature. The phenomenon of dynamic recovery and dynamic recrystallization can be observed by microstructural evolutions. Based on the hyperbolic Arrhenius-type equation, the true stress-true strain data from the tests were employed to establish the constitutive equation considering the effect of the true strain on material constants （α, β, Q, n and A）, which reveals the dependence of the flow stress on strain, strain rate and deformation temperature. The predicted stress-strain curves are in good agreement with experimental results, which confirms that the developed constitutive equations are suitable to research the hot deformation behaviors of Al-Zn-Mg-Sc-Zr alloy.
文摘A multi-scale virtual internal bond (VIB) model for the isotropic materials has been recently proposed to describe the material deformation and fracturing. During the simulation process of material fracturing using VIB, the fracture criterion is directly built into the constitutive formulation of the material using the cohesive force law. Enlightened by the similarity of the damage constitutive model of rock under uniaxial compression and the cohesive force law of VIB, a VIB density function of rock under uniaxial compression is suggested. The elastic modulus tensor is formulated on the basis of the density function. Thus the complete deformation process of rock under the uniaxial compression is simulated.
