卫星局对中波和短波实验的探究及解释

卫星局对中波和短波实验中出现的需要实现电磁波的变频处理、消除电磁干扰、实现电磁兼容及压制互调信号等操作。本文对这些方面进行细致探究。

Spatial and Quantitative Comparison of Satellite-Derived Land Cover Products over China

Because land cover plays an important role in global climate change studies, assessing the agreement among different land cover products is critical. Significant discrepancies have been reported among satellite-derived land cover products, especially at the regional scale. Dif- ferent classification schemes are a key obstacle to the comparison of products and are considered the main fac- tor behind the disagreement among the different products. Using a feature-based overlap metric, we investigated the degree of spatial agreement and quantified the overall and class-specific agreement among the Moderate Resolution Imaging Spectoradiometer （MODIS）, Global Land Cover 2000 （GLC2000）, and the National Land Cover/Use Data- sets （NLCD） products, and the author assessed the prod- ucts by ground reference data at the regional scale over China. The areas with a low degree of agreement mostly occurred in heterogeneous terrain and transition zones, while the areas with a high degree of agreement occurred in major plains and areas with homogeneous vegetation. The overall agreement of the MODIS and GLC2000 products was 50.8% and 52.9%, and the overall accuracy was 50.3% and 41.9%, respectively. Class-specific agree- ment or accuracy varied significantly. The high-agreement classes are water, grassland, cropland, snow and ice, and bare areas, whereas classes with low agreement are shru- bland and wetland in both MODIS and GLC2000. These characteristics of spatial patterns and quantitative agree- ment could be partly explained by the complex landscapes, mixed vegetation, low separability of spectro-temporal- texture signals, and coarse pixels. The differences of class definition among different the classification schemes also affects the agreement. Each product had its advantages and limitations, but neither the overall accuracy nor the class-specific accuracy could meet the requirements of climate modeling.

Omni-Directional Distribution Patterns of Montane Coniferous Forest in the Helan Mountains of China

Slope aspect has significant effect on the development and distribution of montane forest, especially in arid and semiarid regions. This paper, using SPOT5 images and 1：5o,ooo DEM, digitally extracts and analyzes the spatial information of montane coniferous forest （mainly Qinghai spruce）, and thereby explores how the upper and lower limits and the altitudinal range of coniferous forest vary and how the area of coniferous forest is related with annual insolation with all aspects in the Helan Mountains. The results show that： 1） In the eastern flank, the lower limit of coniferous forest is between 1,6oo m and a,ooo m a.s.l., and the upper limit between 2,800 m and 3,ooo m a.s.1.; in the western flank, the lower limit of coniferous forest is between a,ooo m and 2,300 m a.s.l., and the upper limit between 9,80o m and 3,1oo m a.s.1.2） The altitudinal ranges of coniferous forest are 8o6-1,435 m, 438-1,14o m for eastern flank and western flank, respectively. 3） The area of coniferous forest takes on a normal distribution with aspect, and it has a close relationship with annual insolation. This distribution model developed in this paper quantitatively reveals the significant effect of slope aspect on the distribution of coniferous forest in arid and semi-arid land.

Characterizing Spatial Patterns of Precipitation Based on Corrected TRMM_3B_(43) Data over the Mid Tianshan Mountains of China

The poor distribution of meteorological stations results in a limited understanding of the precipitation pattern in the Tianshan Mountains. The spatial patterns of precipitation over the mid Tianshan Mountains were characterized based on the TRMM 3B43 monthly precipitation data. By comparing satellite estimates with observed data, it shows that TRMM 3B43 data underestimate the precipitation in mountain region. Regression models were developed to improve the TRMM 3B43 data, using geographic location and topographic variables extracted from DEM using GIS technology. The explained variance in observed precipitation was improved from 64% (from TRMM 3B43 products alone) to over 82% and the bias reduced by over 30% when location and topographic variables were added. We recalculated all the TRMM 3B43 monthly precipitation grids for the period 1998 to 2009 using the best regression models, and then studied the variation patterns of precipitation over the mid Tianshan Mountains. The results are well explained by a general understanding of the patterns of precipitation and orographic effects. This indicated that the Tianshan Mountains strongly influences the amount and distribution of precipitation in the region. This is highlighted by the confinement of the precipitation maxima to the windward (northern slope). And complex vertical changes in the provenance and distribution of precipitation, like that a negative increasing rate of precipitation in the vertical direction exists in the north but does not in south. The results have also revealed large gradients and different patterns in seasonal precipitation that are not simply related to elevation, the distribution of precipitation may also be affected by other seasonal factors such as the sources of moist air, wind direction and temperature.

Small-area estimation of forest stand structure in Jalisco, Mexico

Natural resource statistics are often unavailable for small ecological or economic regions and policymakers have to rely on state-level datasets to evaluate the status of their resources （i.e., forests, rangelands, grasslands, agriculture, etc.） at the regional or local level. These resources can be evaluated using small-area estimation techniques. However, it is unknown which small area technique produces the most valid and precise results. The reliability and accuracy of two methods, synthetic and regression estimators, used in smallarea analyses, were examined in this study. The two small-area analysis methods were applied to data from Jalisco＇s state-wide natural resource inventory to examine how well each technique predicted selected characteristics of forest stand structure. The regression method produced the most valid and precise estimates of forest stand characteristics at multiple geographical scales. Therefore, state and local resource managers should utilize the regression method unless appropriate auxiliary information is not available.

Achieving Ambitions in Space Science:Bottom-up and Top-down Approaches——An Interview with Prof.Roger-Maurice Bonnet

At the time when Chinese scientists are hailing the successful launch of the DAMPE,a satellite to detect possible dark matter particles in space,and meanwhile expecting the launch of further space missions,we have the honor to invite Prof.Roger-Maurice Bonnet,former Science Director of ESA(the European Space Agency)to glve comments and advice on project management in the field of space science.

Detection of crevasses over polar ice shelves using Satellite Laser Altimeter

Ice shelf breakups account for most mass loss from the Antarctic Ice Sheet as the consequence of the propagation of crevasses(or rift)in response to stress.Thus there is a pressing need for detecting crevasses’location and depth,to understand the mechanism of calving processes.This paper presents a method of crevasse detection using the ICESat-1/GLAS data.A case study was taken at the Amery Ice Shelf of Antarctica to verify the accuracy of geo-location and depth of crevasses detected.Moreover,based on the limited crevasse points,we developed a method to detect the peak stress points which can be used to track the location of the crack tips and to identify the possible high-risk area where an ice shelf begins to break up.The spatial and temporal distribution of crevasse depth and the spatial distribution of peak stress points of the Amery Ice Shelf were analyzed through 132 tracks in 16 campaign periods of ICESat-1/GLAS between 2003 and 2008.The results showed that the depth of the detected crevasse points ranged from 2 to 31.7 m,which were above the sea level;the crevasse that advected downstream to the front edge of an ice shelf has little possibility to directly result in breakups because the crevasse depth did not show any increasing trend over time;the local stress concentration is distributed mainly in the suture zones on the ice shelves.

An improved Landsat Image Mosaic of Antarctica

A revised Landsat Image Mosaic of Antarctica （LIMA） is presented, using the 1073 multi-band scenes of the original Land- sat-7 ETM＋ LIMA image collection available at the United States Geological Survey （USGS： http：//lima.usgs.gov/）. Three improvements have been applied during the data processing： （1） DN saturation is adjusted by adopting a linear regression, which has a lower root mean square error than the ratio regression used by LIMA; （2） solar elevation angle is calculated using pixel-level latitude/longitude and the acquisition time and date of the central pixel of the scene, improving slightly upon the bi- linear interpolation of the solar elevation angles of scene comers applied in LIMA; and （3） two additional image bands, Band 5 and Band 7, are sharpened using the panchromatic band （Band 8） and a Gram-Schmidt Spectral Sharpening algorithm to more easily distinguish snow, cloud and exposed rocks. The final planetary reflectance product is stored in 16-bit bands to preserve the full radiometric content of the scenes. A comparative statistical analysis among 12 sample regions indicates that the new mosaic has enhanced visual qualities, information entropy, and information content for land cover classification relative to LIMA.

Multi-objective layout optimization of a satellite module using the Wang-Landau sampling method with local search

The layout design of satellite modules is considered to be NP-hard. It is not only a complex coupled system design problem but also a special multi-objective optimization problem. The greatest challenge in solving this problem is that the function to be optimized is characterized by a multitude of local minima separated by high-energy barriers. The Wang-Landau(WL) sampling method, which is an improved Monte Carlo method, has been successfully applied to solve many optimization problems. In this paper we use the WL sampling method to optimize the layout of a satellite module. To accelerate the search for a global optimal layout, local search(LS) based on the gradient method is executed once the Monte-Carlo sweep produces a new layout. By combining the WL sampling algorithm, the LS method, and heuristic layout update strategies, a hybrid method called WL-LS is proposed to obtain a final layout scheme. Furthermore, to improve significantly the efficiency of the algorithm, we propose an accurate and fast computational method for the overlapping depth between two objects(such as two rectangular objects, two circular objects, or a rectangular object and a circular object) embedding each other. The rectangular objects are placed orthogonally. We test two instances using first 51 and then 53 objects. For both instances, the proposed WL-LS algorithm outperforms methods in the literature. Numerical results show that the WL-LS algorithm is an effective method for layout optimization of satellite modules.