It was generally accepted that manuscript maps,as distinct from printed maps,exhibited no signs of printing and were entirely hand-drawn.Western scholars Christopher Terrell and Tony Campbell were the first to break t...It was generally accepted that manuscript maps,as distinct from printed maps,exhibited no signs of printing and were entirely hand-drawn.Western scholars Christopher Terrell and Tony Campbell were the first to break this stereotype in 1987,followed by Catherine Delano-Smith and Chet Van Duzer who discovered a few Renaissance maps and two Qing dynasty maps that showed use of hand stamps.Inspired by these findings,this paper explores the stamped map signs in ten Chinese maps,three Japanese maps,and three Korean maps.By analyzing each map and each type of stamp,this paper provides more examples of this research,broadens the research horizons and geographical area,and demonstrates that use of stamps in manuscript maps was invented independently among people of different regions and civilizations as a result of human nature.展开更多
As a novel technique, molecular imprinting technique are attracting more and more attention in recent years, due to its specific recognition function to im- printed molecules. This paper firstly introduced this techni...As a novel technique, molecular imprinting technique are attracting more and more attention in recent years, due to its specific recognition function to im- printed molecules. This paper firstly introduced this technique from its history, princi- ple, classification and methods, and then reviewed the application in food industry, and presented possible future research orientations.展开更多
In order to improve the robustness of the differential number watermarking (DNW) algorithm proposed by us before, we proposed turbo-based DNW (T-DNW) in which the turbo code was employed in the DNW algorithm. The turb...In order to improve the robustness of the differential number watermarking (DNW) algorithm proposed by us before, we proposed turbo-based DNW (T-DNW) in which the turbo code was employed in the DNW algorithm. The turbo code was used to encode the message prior to watermark embedding and decode the watermark posterior to watermark detection. From the analysis and experiments, the following conclusion could be drawn. The T-DNW algorithm has little higher computational complexity than DNW. And both algorithms have the same performance in terms of watermark visual quality impact. Furthermore, the T-DNW algorithm is much more robust against some common attack than DNW. Although the T-DNW algorithm sacrifices a half payload, we think the achievements are encouraging.展开更多
Three-dimensional （3D） printing is a novel promising technology based on 3D imaging and layer-by-layer additive fabrication. It has a profound influence on all aspects of our lives and is playing an increasing impor...Three-dimensional （3D） printing is a novel promising technology based on 3D imaging and layer-by-layer additive fabrication. It has a profound influence on all aspects of our lives and is playing an increasing important role in many areas including engineering, manufacturing, art, education and medicine. ＂3D bioprinting＂ has been put forward with the technical progress in 3D printing and might be a possible way to solve the serious problem of human organ shortage in tissue engineering and regenerative medicine. Many research groups flung them into this area and have already made some gratifying achievements. However, it is a long way to fabricate a live organ. Many elements lead to the limitation of 3D bioprinting. This review introduces the background and development history of 3D bioprinting, compares different approaches of 3D bioprinting and illustrates the key factors of the printing process. Meanwhile, this review also points out existing challenges of 3D bioprinting and has a great prospect. Some points proposed in this review might be served as reference for the research of this field.展开更多
In this paper the notation of base-mesocompactness is introduced and the following results are mainly obtained：（1） Let X be base-mesocompact and X＇ an F σ subset of X.If X is normal,then X＇ is base-mesocompact r...In this paper the notation of base-mesocompactness is introduced and the following results are mainly obtained：（1） Let X be base-mesocompact and X＇ an F σ subset of X.If X is normal,then X＇ is base-mesocompact relative to X.（2） Let f：X → Y be a base-mesocompact mapping,ω（X） be a regular cardinality of X and ω（X） ≥ ω（Y）.If Y is base-mesocompact and regular,then X is base-mesocompact.（3） Let f：X → Y be a closed lindelof mapping with regular domain and regular range.If Y is base-mesocompact,then X is base-mesocompact.（4） Let X be base-mesocompact.If Y is locally compact and base-mesocompact,then X × Y is base-mesocompact.展开更多
Medical models, or ＂phantoms,＂ have been widely used for medical training and for doctor-patient interactions. They are increasingly used for surgical planning, medical computational models, algorithm verification a...Medical models, or ＂phantoms,＂ have been widely used for medical training and for doctor-patient interactions. They are increasingly used for surgical planning, medical computational models, algorithm verification and validation, and medical devices development. Such new applications demand high-fidelity, patient-specific, tissue-mimicking medical phantoms that can not only closely emulate the geometric structures of human organs, but also possess the properties and functions of the organ structure. With the rapid advancement of three-dimensional （3D） printing and 3D bioprinting technologies, many researchers have explored the use of these additive manufacturing techniques to fabricate functional medical phantoms for various applications. This paper reviews the applications of these 3D printing and 3D bioprinting technologies for the fabrication of functional medical phantoms and bio-structures. This review specifically discusses the state of the art along with new developments and trends in 3D printed functional medical phantoms （i.e., tissue-mimicking medical phantoms, radiologically relevant medical phantoms, and physiological medical phantoms） and 3D bio-printed structures （i.e., hybrid scaffolding materials, convertible scaffolds, and integrated sensors） for regenerated tissues and organs.展开更多
In this study, indoor air quality （IAQ） assessments were carried out in a screen printing facility. The air sampling was conducted in press department, including two different types of screen printing machines： sem...In this study, indoor air quality （IAQ） assessments were carried out in a screen printing facility. The air sampling was conducted in press department, including two different types of screen printing machines： semi-automatic and automatic. Air samples were collected and analyzed in situ for 4 times, once per 2 hours, during working time of 8 hours. Analysis of the experimental data showed that ambient ozone concentrations slowly increases with the increasing of TVOCs concentration and intensive use of UV lamps during automatic screen printing process. Therefore, the detected concentration levels of ozone and VOCs were compared with the Occupational Safety and Health Administration （OSHA） and Serbian Regulation. Comparison of the two mentioned standard regulations, the ozone concentrations in indoor printing air were from 0.83 to 8.1 and 2.4 to 16.2 times higher in the relation to the prescribed PEL and maximum allowed concentration （MAC） values, respectively, while the concentrations of particular VOCs were much below the PEL prescribed by the OSHA.展开更多
Proper solid waste disposal is an important socioeconomic concern for all developing countries.Municipalities have their own policies,individual approaches and methods to manage the solid wastes.They consider wastelan...Proper solid waste disposal is an important socioeconomic concern for all developing countries.Municipalities have their own policies,individual approaches and methods to manage the solid wastes.They consider wastelands outside the urban area as the best suitable for the solid waste disposal.Such improper site selection will create morphological changes that lead to environmental hazards in the urban and its surrounding areas.In this research,the site selection for urban solid waste disposal in the Coimbatore district used geographical information system(GIS)and multi-criteria decision analysis(MCDA).Thematic layers of lineament density,landuse/landcover,population density,groundwater depth,drainage density,slope,soil texture,geology and geomorphology were considered as primary criteria and weights for criteria,and sub-criteria were assigned by MCDA analysis.The resultant weight score was validated by consistency ratio so that the efficiency of the selected criteria was justified.The overlay analysis in GIS environment provides 17 potential zones in Coimbatore district,among which,four suitable sites were screened and refined with the help of field investigation and visual interpretation of satellite image.The result of landfill suitability map shows the effectiveness of the proposed method.展开更多
文摘It was generally accepted that manuscript maps,as distinct from printed maps,exhibited no signs of printing and were entirely hand-drawn.Western scholars Christopher Terrell and Tony Campbell were the first to break this stereotype in 1987,followed by Catherine Delano-Smith and Chet Van Duzer who discovered a few Renaissance maps and two Qing dynasty maps that showed use of hand stamps.Inspired by these findings,this paper explores the stamped map signs in ten Chinese maps,three Japanese maps,and three Korean maps.By analyzing each map and each type of stamp,this paper provides more examples of this research,broadens the research horizons and geographical area,and demonstrates that use of stamps in manuscript maps was invented independently among people of different regions and civilizations as a result of human nature.
文摘As a novel technique, molecular imprinting technique are attracting more and more attention in recent years, due to its specific recognition function to im- printed molecules. This paper firstly introduced this technique from its history, princi- ple, classification and methods, and then reviewed the application in food industry, and presented possible future research orientations.
文摘In order to improve the robustness of the differential number watermarking (DNW) algorithm proposed by us before, we proposed turbo-based DNW (T-DNW) in which the turbo code was employed in the DNW algorithm. The turbo code was used to encode the message prior to watermark embedding and decode the watermark posterior to watermark detection. From the analysis and experiments, the following conclusion could be drawn. The T-DNW algorithm has little higher computational complexity than DNW. And both algorithms have the same performance in terms of watermark visual quality impact. Furthermore, the T-DNW algorithm is much more robust against some common attack than DNW. Although the T-DNW algorithm sacrifices a half payload, we think the achievements are encouraging.
基金Acknowledgements The authors would like to acknowledge the support from National Natural Science Foundation of China under Grant 81501607 and 51475419, Natural Science Foundation of Zhejiang Province of China under Grant LY15H160019, Key Research and Development Projects of Zhejiang Province under Grant 2017C 1054.
文摘Three-dimensional （3D） printing is a novel promising technology based on 3D imaging and layer-by-layer additive fabrication. It has a profound influence on all aspects of our lives and is playing an increasing important role in many areas including engineering, manufacturing, art, education and medicine. ＂3D bioprinting＂ has been put forward with the technical progress in 3D printing and might be a possible way to solve the serious problem of human organ shortage in tissue engineering and regenerative medicine. Many research groups flung them into this area and have already made some gratifying achievements. However, it is a long way to fabricate a live organ. Many elements lead to the limitation of 3D bioprinting. This review introduces the background and development history of 3D bioprinting, compares different approaches of 3D bioprinting and illustrates the key factors of the printing process. Meanwhile, this review also points out existing challenges of 3D bioprinting and has a great prospect. Some points proposed in this review might be served as reference for the research of this field.
基金Supported by the Department of Education Sichuan Province Foundation for Science Research(2006C041)
文摘In this paper the notation of base-mesocompactness is introduced and the following results are mainly obtained：（1） Let X be base-mesocompact and X＇ an F σ subset of X.If X is normal,then X＇ is base-mesocompact relative to X.（2） Let f：X → Y be a base-mesocompact mapping,ω（X） be a regular cardinality of X and ω（X） ≥ ω（Y）.If Y is base-mesocompact and regular,then X is base-mesocompact.（3） Let f：X → Y be a closed lindelof mapping with regular domain and regular range.If Y is base-mesocompact,then X is base-mesocompact.（4） Let X be base-mesocompact.If Y is locally compact and base-mesocompact,then X × Y is base-mesocompact.
文摘Medical models, or ＂phantoms,＂ have been widely used for medical training and for doctor-patient interactions. They are increasingly used for surgical planning, medical computational models, algorithm verification and validation, and medical devices development. Such new applications demand high-fidelity, patient-specific, tissue-mimicking medical phantoms that can not only closely emulate the geometric structures of human organs, but also possess the properties and functions of the organ structure. With the rapid advancement of three-dimensional （3D） printing and 3D bioprinting technologies, many researchers have explored the use of these additive manufacturing techniques to fabricate functional medical phantoms for various applications. This paper reviews the applications of these 3D printing and 3D bioprinting technologies for the fabrication of functional medical phantoms and bio-structures. This review specifically discusses the state of the art along with new developments and trends in 3D printed functional medical phantoms （i.e., tissue-mimicking medical phantoms, radiologically relevant medical phantoms, and physiological medical phantoms） and 3D bio-printed structures （i.e., hybrid scaffolding materials, convertible scaffolds, and integrated sensors） for regenerated tissues and organs.
文摘In this study, indoor air quality （IAQ） assessments were carried out in a screen printing facility. The air sampling was conducted in press department, including two different types of screen printing machines： semi-automatic and automatic. Air samples were collected and analyzed in situ for 4 times, once per 2 hours, during working time of 8 hours. Analysis of the experimental data showed that ambient ozone concentrations slowly increases with the increasing of TVOCs concentration and intensive use of UV lamps during automatic screen printing process. Therefore, the detected concentration levels of ozone and VOCs were compared with the Occupational Safety and Health Administration （OSHA） and Serbian Regulation. Comparison of the two mentioned standard regulations, the ozone concentrations in indoor printing air were from 0.83 to 8.1 and 2.4 to 16.2 times higher in the relation to the prescribed PEL and maximum allowed concentration （MAC） values, respectively, while the concentrations of particular VOCs were much below the PEL prescribed by the OSHA.
文摘Proper solid waste disposal is an important socioeconomic concern for all developing countries.Municipalities have their own policies,individual approaches and methods to manage the solid wastes.They consider wastelands outside the urban area as the best suitable for the solid waste disposal.Such improper site selection will create morphological changes that lead to environmental hazards in the urban and its surrounding areas.In this research,the site selection for urban solid waste disposal in the Coimbatore district used geographical information system(GIS)and multi-criteria decision analysis(MCDA).Thematic layers of lineament density,landuse/landcover,population density,groundwater depth,drainage density,slope,soil texture,geology and geomorphology were considered as primary criteria and weights for criteria,and sub-criteria were assigned by MCDA analysis.The resultant weight score was validated by consistency ratio so that the efficiency of the selected criteria was justified.The overlay analysis in GIS environment provides 17 potential zones in Coimbatore district,among which,four suitable sites were screened and refined with the help of field investigation and visual interpretation of satellite image.The result of landfill suitability map shows the effectiveness of the proposed method.
