New correction method for controlled-source electromagnetics source effects

A novel method for source effect correction based on integral equation method is proposed.By taking the electrical horizontal field Ex of current source as an example,the correction method is validated using both simulated data and field data.The results show that the correction method is feasible and effective for isotropic media.When the field data are processed,the correction method normalizes the sources with different geological structures,which eliminates the geological difference among sources,and retains the geological difference among receivers.The correction results are in line with the expectation in whole.

3D gel printing of VC reinforced high vanadium high-speed steel

Due to their high hardness and high strength,VC reinforced hard materials such as high vanadium high-speed steel(HVHSS)are not suitable for machining to obtain complex shape with low cost.Therefore,3D gel printing(3DGP)was employed to print HVHSS parts,using highly loaded slurry with 60%solid content as printing slurry.After printing parameters optimization,the printing sample had good surface quality,and obvious printing lines were observed.The extruded filament was in-situ cured,thus enough to maintain the designed shape.Uniform sintering shrinkage with a shrinkage rate of about 15%was obtained in the as-sintered sample with relative density of 99%.The surface roughness decreased from 6.5μm to 3.8μm.Fine carbides(<1μm)and dense microstructure were achieved.Besides,the as-sintered sample had comprehensive performance of HRC60 in hardness,3000 MPa in bend strength,and 20−26 J in impact energy.This study proposed one promising method to directly manufacture complex-shaped hard materials without subsequent machining.

The Doklam Standoff Crisis and the Future of Sino-Indian Relations

Doklam Standoff, a crisis of Sino-Indian bilateral relations, was a large-scale military deployment between China and India. The crisis reflects the newly forming distrust between the two countries that led to an outburst as a result of a series of conflicts over the past two years, which signifies that Sino-Indian relations are entering a new stage characterized by increasingly obvious structural conflict. On the surface, the Modi Administration designed the crisis to stop China from building border infrastructure, to pursue its own absolute security, to maintain South Asian order dominated by India, and to consolidate the basis of strategic cooperation among India, the United States and Japan. Ultimately, however, the British buffer zone theory, the Mandala theory, the Brahmin supremacy theory in traditional Indian culture and the US Monroe Doctrine have also shaped the mindset and behavioral patterns of the Modi Administration. Under the influence of seeking absolute security and its strategic culture, as well as the strong desire to be a great power, the assertive Modi Administration has obviously strengthened its precautionary measures and hostilities toward China. The relations between the two countries are becoming tense. In order to achieve the goal of ＂dragon and elephant dancing together＂, and to avoid the recurrence of crises like the Doklam Standoff, the two sides have to adhere to the two basic principles of viewing each other as opporttmities for development instead of threats to each other. The mindset of a zero-sum game should be abandoned, and efforts should be made to co-found mutual respect and win-win cooperation in areas of common interest.

Colon Duplication Combined with Mature Teratoma-A Case Report

Gastrointestinal duplication is an uncommon congenital abnormality, and colonic duplication combined with teratoma has rarely been reported. A 24-year-old man presented to the Emergency Department with a sudden onset of severe abdominal pain lasting 2 hours without intermission, and also complained to have who had chronic constipation since his birth.Multislice CT imaging showed 2 masses in the retroperitoneal space. The one huge cystic mass was detected behind the transverse colon, pancrease and stomach without infiltration into the surrounding tissues. The right mass containing soft tissues and bones pushed aside the inferior vena cava and right kidney.The cystic duplication and the right mass were excised separately.This case indicates that a patient diagnosed as colonic duplication should receive further differential diagnosis to identify if it coexists other diseases, espedally the teratoma.

SYNCHRONIZATION RECOVERY SCHEME IN WATERMARKING DETECTION

Most proposed digital watermarking algorithms are sensitive to geometric attacksbecause the synchronization information of watermark embedding and detection is destroyed. Inthis letter a novel synchronization recovery scheme based on image normalization is proposed. Thepresented scheme does not require the original image and can be applied to various watermarksystems. A wavelet-based watermarking scheme is proposed as an example and experimentalresults show that it is robust to geometric attacks.

Panax quinquefolium saponin attenuates cardiomyocyte apoptosis induced by thapsigargin through inhibition of endoplasmic reticulum stress

Background Endoplasmic reticulum （ER） stress-related apoptosis is involved in the pathophysiology of many cardiovascular diseases, and Panax quinquefolium saponin （PQS） is able to inhibit excessive ER stress-related apoptosis of cardiomyocytes following hypoxia/reoxygenation and myocardial infarction. However, the pathway by which PQS inhibits the ER stress-related apoptosis is not well understood. To further investigate the protective effect of PQS against ER stress-related apoptosis, primary cultured eardiomyocytes were stimulated with thapsigargin （TG）, which is widely used to model cellular ER stress, and it could induce apoptotic cell death in sufficient concentration. Methods Primary cultured cardiomyocytes from neonatal rats were exposed to TG （1 μmol/L） treatment for 24 h, following PQS pre-treatment （160 μg/mL） for 24 h or pre-treatment with small interfering RNA directed against protein kinase-like endoplasmic reticulum kinase （Si-PERK） for 6 h. The viability and apoptosis rate of cardiomyocytes were detected by cell counting kit-8 and flow cytometry respectively. ER stress-related protein expression, such as glucose-regulated protein 78 （GRP78）, calreticulin, PERK, eukaryotic translation initiation factor 2α （elF2c0, activating transcription factor 4 （ATF4）, and C/EBP homologous protein （CHOP） were assayed by western blotting. Results Both PQS pre-treatment and PERK knockdown remarkably inhibited the cardiomyocyte apoptosis induced by TG, increased cell viability, decreased phosphorylation of both PERK and eIF2α, and decreased protein levels of both ATF4 and CHOP. There was no statistically significant difference between PQS pre-treatment and PERK knockdown in the cardioprotective effect. Conclusions Our data indicate that the PERK-eIF2α-ATF4-CHOP pathway of ER stress is involved in the apoptosis induced by TG, and PQS might prevent TG-induced cardiomyocyte apoptosis through a mechanism involving the suppression of this pathway. These findings provide novel data regarding the molecular mechanisms by which PQS inhibits cardiomyocyte apoptosis.

Soil Erodibility Characteristics of Reclamation Area--A Case Study in Indonesian Coal Mining

Soil erosion is one of the most important problems in Indonesia coal mining reclamation area because located in tropical areas which has high average of rainfall. Severe soil erosion leads to the unsuccessful reclamation progress in the post mine surface due to impact on steep slope and limit of seedling establishment. Considering the impact of soil erosion in mining activities, Indonesian government had issued several regulations related to erosion control. Soil erodibility is one of the main factors controlling soil erosion. It will determine amount of soil loss and total sediment. Estimation of soil erodibility aims to determine the susceptibility of soil to be eroded by water. The estimation considers soil texture, percentage of organic matter, soil structure and soil permeability. This study was integration between field work to collect soil sample, soil laboratory analysis, soil erodibility analysis using erodibility equation Wischmeier and Smith （1978） and analysis to predict soil erosion/annual total soil loss. The results show that soil erodibility in study area was calculated to range from 0.091 to 0.142 tons ha h/ha/MJ/mm and soil erodibility of the study area was categorized as very low and low. There are strong relationships between soil erodibility and soil erosion but the correlation was not fully linier due to other factors controlling soil erosion / annual total soil loss.

Recent Political Developments in India and Their Effects

In March 2017, Narendra Modi led his Bharatiya Janata Party(BJP) to victory in state elections, among which he gained parliamentary election of Uttar Pradesh(state in northern India), known as the weather vane of Indian elections. Back in 2014, the BJP had already won a simple majority in Lok Sabha(the lower house of parliament), bringing an end to more than 30 years of coalition government. Now, the BJP is exhibiting stronger presence as a one-party-rule at both federal and local levels, with no counter-balance from the Indian National Congress, local parties, or left wing parties now or in the foreseeable future. This increases the likelihood of Modi's re-election as prime minister in 2019. Obviously,Indian political development is characterized by complexity, accidental factors and intrinsic logic, which will definitely exert great influence on the future of India.

Innovative Applications of Post-Tension for Restoration and Rehabilitation of Bridges and Structures--Case Studies in India

This paper deals with new and innovative case studies of application of post-tensioning for restoration of structures for buildings, bridges and rock stabilization in India. In earlier situations for these types of cases conventional method of repair and rehabilitation has been used. These innovative approaches for restoration have led to enormous saving of cost and time. The advantages of post tensioning are well known in the civil industry and are being used for the last 40 to 50 years. Post tensioning is one of the best methods to induce stresses in the concrete before application of live load and this technique can also be widely used for restoration and rehabilitation of structures. Unlike the use of post-tensioning in new structures there are no definite methods or codes for application in restoration and rehabilitation of structures. For restoration and rehabilitation of structures, PT （post tensioned） technique can be applied in combination with other techniques and materials available. Bridge lifting is a tricky and risky job especially when the superstructure is displaced appreciably by a natural calamity, etc.. Not only the present state of structure needs proper study before commencement of restoration and rehabilitation but also calls for careful execution. This paper deals with case studies of innovative applications of post tensioning in restoration and rehabilitation of structures and restoration of bridge structure in Andaman ＆ Nicobar Island, India affected by Sumatra quake.

Research Achievements and Trends in Forest Products Science in Indonesia

The supply of logs for wood industries during the period 2004-2008 was 13.5-32 million cubic meters per year. Logs from plantation forest reached about 65%, which was exploited from industrial plantation forest, Perum Perhutani, as a government enterprise, community forest and estate. The changing log supply from natural forest to plantation forest implies changing of wood species, cutting cycle, log diameter and wood properties. Research concerning the utilization of fast growing species, small log diameter, lesser used species and other llignocellulosic material have been intensively done by some research institutes and universities, and were related to wood properties, wood properties enhancement, wood chemistry, bio-composite, wood engineering, and also non-timber forest products.

Self-healing materials enable free-standing seamless large-scale 3D printing

Three-dimensional(3 D)printing has had a large impact on various fields,with fused deposition modeling(FDM)being the most versatile and cost-effective 3 D printing technology.However,FDM often requires sacrificial support structures,which significantly complicates the processing and increases the cost.Furthermore,poor layer-to-layer adhesion greatly affects the mechanical stability of 3D-printed objects.Here,we present a new Print-Healing strategy to address the aforementioned challenges.A polymer ink(Cu-DOU-CPU)with synergetic triple dynamic bonds was developed to have excellent printability and room-temperature self-healing ability.Objects with various shapes were printed using a simple compact 3D printer,and readily assembled into large sophisticated architectures via self-healing.Triple dynamic bonds induce strong binding between layers.Additionally,damaged printed objects can spontaneously heal,which significantly elongates their service life.This work paves a simple and powerful way to solve the key bottlenecks in FDM 3D printing,and will have diverse applications.

Binary Image Watermarking Algorithm Using Matrix of Complexity Index

A new watermarking algorithm of binary image is proposed.The complexity index of pixels is presented to reflect the change degree of pixels and to evaluate the modifiable degree of pixels.Firstly, in a small image block, the complexity index of"jumping-change"is calculated in vertical and horizontal direction.Secondly, the matrix of the complexity index is calculated by integrating the complexity index of pixels in two directions.Finally, the matrix of the complexity index is used to embed the watermark in binary images.Experimental results show that the proposed algorithm has a good performance.

Replication of large area nanoimprint stamp with small critical dimension loss

In this paper,the replication process of large area nanoimprint stamp with small critical dimension(CD) loss was investigated,using the thin residual layer nanoimprint lithography(NIL) technology.The residual layer thickness was optimized by changing the spin-coated resist thickness.The dependences of the residual layer etching rate on gas flow,chamber pressure,and RF power were investigated,and the optimized process conditions were established.By means of the thin residual layer NIL technique and optimized residual layer etching process,large area stamp with small CD loss and multi-orientation patterns was successfully replicated on 2-inch SiO2/Si wafer.The CD loss was controlled within 5 nm.The replicated stamp showed high performance in the patterning with thermal NIL.The replication process reported in this work could also be used to fabricate large area nanostructures with small CD loss.

How 'Sustainable' are Post-disaster Measures? Lessons to Be Learned a Decade After the 2004 Tsunami in the Indian Ocean

This article addresses the sustainability implications of post-disaster measures in the context of the 2004 Indian Ocean Tsunami by presenting an analysis of the current situations and changes in some of the affected regions. Sustainability implications of measures are captured by investigating the persistence of the social and economic living conditions in relation to post-disaster measures, and the alignment of the measures with basic environmental aspects. Based on major concepts relevant in disaster science and sustainability research, the study explored sustainability aspects of post-disaster measures implemented after the 2004 tsunami, by conducting selected interviews among the participants of the 2015 international seminar ‘‘11 Years after the Indian Ocean Tsunami 2004'' and a broader online survey. Information was sought about(1) the current state of vulnerability of the local population in the regions affected;(2) the main lessons that have been identified to improve project design and management of recovery and vulnerability reduction;and(3) project sustainability implications with respect to the state of today's vulnerability. Based on the analysis of the information on these three priority areas, selected tasks for future disaster risk management are identified, such as more integrative planning and improved coordination with international organizations and local people.