焦化厂循环冷却水系统不停车清洗

详细介绍了循环冷却水系统在不停车情况下的清洗方法和步骤。考虑到循环水池为混凝土材质,采用络合剂清洗代替了有机酸清洗。为了有效地清除系统内的水垢,清洗时间较有机酸清洗长。

制冷站循环冷却水系统的经济运行和冷却水二次利用的探讨

一、引言我厂制冷站总装机能力为798万kal/h,配有ⅡBF120×3.3离心制冷机4台、ⅡBF75×0离心制冷机2台、JZY-KF20×46螺杆制冷机3台。按生产负荷要求,在最炎热的夏季,需开120万kal/h和75万kal/h离心机各1台,开46万kal/h螺杆机2台。而在冬季,仅开螺杆制冷机1台即能满足生产要求。制冷机冷凝器需利用大量冷却水。

对山西省电力工业节水潜力的分析

根据电力工业用水特点及用水工艺，对其冷凝器冷却水系统、冲灰系统、工业水系统及锅炉水系统的节水潜力进行了多层次多方位的分析；充分参考国内外先进用水企业的节水工艺。

Synthesis and application of an environmentally friendly antiscalant in industrial cooling systems

Allylpolyethoxy carboxylate macromonomers possessing polyethylene oxygen long chains were synthesized by advanced technology of the polyether cap.A novel double-hydrophilic block copolymer was prepared through free radical polymeric reactions in aqueous solution and its performance on CaCO3 inhibition and dispersancy activity towards Fe2 O3 was evaluated in recirculating cooling water systems.The study shows that acrylic acid-allylpolyethoxy carboxylate has a significant ability to inhibit the precipitation of calcium carbonate and an excellent dispersing capability to stabilize iron Ⅲ in industrial cooling systems. X-ray diffraction shows that there is a number of vaterite crystals in the presence of the phosphorous free and non-nitrogen copolymer. The change in crystal forms is also confirmed by the Fourier-transform infrared spectra the scanning electron microscopy and the transmission electron microscopy. The inhibition mechanism is proposed and it shows that the interactions between calcium and polyethylene glycol PEG are the fundamental impetus for restraining the formation of the scale in cooling water systems.

Effects of Nutrients on Biofouling Formation and Preponderant Bacteria Diversity in Recirculating Cooling Water System

A series of orthogonal array experiments were conducted using carbon source, ammonia nitrogen and total phosphorus （TP） as major influencing factors to investigate the effects of nutrients on biofouling formation and preponderant bacteria diversity in the recirculatiug cooling water system. Carbon source was demonstrated to be the most significant determinant affecting the biofouling formation. A minimum biofouling outcome was obtained when BOD2, NHa＋-N and TP were 25, 10, and 1 mg/L, respectively. Then the preponderant bacteria strains in biofouling mass under two typical culture conditions （negative and favorable） were identified applying both traditional biochemical methods and further molecular biology technology with phylogenetic affiliation analysis, which indicated that Enterobacteriaceae Enterobacter, Micrococcaceae Staphylococcus, Bacillaceae Bacillus, Enterobacteriaceae Proteus, Neisseriaceae Neisseria and Pseudomonadaceae Pseudomonas were dominant under negative condition, while Enterobacteriaceae Klebsiella, Enterobacteriaceae Enterobacter and Microbacterium - under favorable one.

Laccase Immobilized on Mesoporous Silica Materials and Its Corrosion Inhibition Performance in Circulating Cooling Water System

Mesoporous SiO_2 microspheres were synthesized using the sol-gel method and were characterized by TEM, FT-IR and BET techniques. The diameter of the microspheres is about 100—150 nm, and the average mesopore diameter is 2.55 nm, while the specific surface area is 1 088.9 m2/g. Mesoporous SiO_2 microspheres adsorb glutaraldehyde and immobilize laccase by means of the aldehyde group in glutaral which can react with the amidogen of laccase. The immobilization conditions were optimized at a glutaraldehyde concentration of 0.75%, a crosslinking time of 8 h, a laccase concentration of 0.04 L/L and an immobilization time of 10 h. When diesel leakage concentration was 80 mg/L, the highest corrosion inhibition efficiency of immobilized laccase reached 49.23%, which was slightly lower than the corrosion inhibition efficiency of free laccase(59%). The diesel degradation ratio could reach up to 45%. It has been proved that the immobilized laccase could degrade diesel to inhibit corrosion.

Design of Heat Pipe Type Adsorption Ice Maker for Fishing Boats

A heat pipe type adsorption ice maker with two adsorbers for fishing boats is designed by using ammonia as refrigerant and compound of activated carbon-CaCl2 as adsorbent. This type of heat pipe adsorber can solve the problem of incompatibility between ammonia, copper, seawater and steel. The working process of the ice maker with 8.7kg adsorbent per bed is simulated. The results show that the optimal semi-cycle time is about 9 min at the evaporating temperature of -15℃, where the corresponding cooling power, specific cooling power per kilogram adsorbent SCP and coefficient of refrigerant performance COP are respectively 3.6kW, 217W·kg-1 and 0.404.

Energy performance assessment on central air-conditioning system of commercial building: A case study in China

Energy performance assessment on central air-conditioning system is essential to optimize operating, reduce operating costs, improve indoor environmental quality, and determine whether the retrofitting of the equipment is necessary. But it is difficult to evaluate it reasonably and comprehensively due to its complexity. A "holistic" approach was discussed to evaluate the energy performance of central air-conditioning system for an extra-large commercial building in a subtropical city. All procedures were described in detail, including field investigation method, field measurement instruments, data processing and data analyzing. The main factors affecting energy consumption of air-conditioning system were analyzed and the annual cooling-energy use intensity of this building was calculated and also compared with other shopping malls and other types of buildings in Guangzhou. And COP(coefficient of performance) of chiller, water transfer factor of chilled water system and cooling water system were taken into consideration. At last, the thermal comfort and indoor air quality issues were addressed. The results show that the chilled water pumps are over-sized and the indoor environmental quality should be improved. The purpose of this work is to provide reference for energy performance assessment method for air-conditioning system.

Influence of Cooling Systems on the Behaviour of Dairy Cows Housed in Cubicle Barn

The aim of this paper is to collect information about dairy cow＇s behaviour connected to different environmental conditions. During summer 2009 and winter 2010 experimental trials were arranged to verify the behaviour of dairy cows in a farm located in Po Plain （Italy）. The barn was provided with an air-water cooling system, based on the use of fans and sprinklers placed only in the feeding alley. Two different trials were carried out. The first experiment was targeted on verifying the use of the cubicles by the cows in relation to the availability of the cooling system only in feeding area. The second trial aimed at testing the effectiveness of zone cooling systems placed in the front of cubicles. For this purpose three cubicles in the barn were provided with cooling systems, based on the input of high velocity conditioned air streams. The results clearly remark that the behaviour of the animals is greatly influenced by the environmental conditions. With high temperatures the use of the cubicles is deeply reduced and the animals prefer to stay in feeding area, thus benefiting from the cooling effect of water sprinkled by the showers and of the air streams created by the fans. With air temperatures increasing from 21℃ to 33 ℃ the cows reduce the staying in the cubicles, which gets down from 540 to 32% （r2 = 0.2608）. As regards the efficacy of zone cooling system in the cubicles, the results are not particularly encouraging. The cows continue to use the cubicles without changing the behaviour in relation to the presence of conditioned air flow.

Treatment of Dairy Wastewater Effluent Using Submerged Membrane Microfiltration System

Dairy wastewater effluent has become one of the major concerns for the dairy processing industries. Because of large of wastewater effluent generation, the dairy processing industries may become potential candidates for wastewater reuse. Treated wastewater can be utilized in cooling systems and washing plant floor, as well as its potential use for greenery irrigation purposes. In addition, treating dairy effluent will also benefit the environment. The purpose of this study is to characterize wastewater from a selected dairy industry in Kuwait （Kuwait Dairy Company） and a study of applying micro filtration treatment process for treating the dairy wastewater. A complete treatment system including biological treatment, powdered activated carbon （PAC） and submerged membrane microfiltration system （CMF-S） was installed at Kuwait Institute for Scientific Research （KISR） research plant. The overall results of this study indicate that the complete system is capable of treating the dairy effluent. The average removal efficiencies of the system for biological oxygen demand （BOD）, chemical oxygen demand （COD）, total dissolved solid （TDS） were 98.8%, 92.5%, 96.7% respectively.

OECD/NEA ROSA Project Experiment on Steam Condensation in PWR Horizontal Legs during Large-Break LOCA

Separate-effect experiment simulating steam direct-contact condensation on ECCS （emergency core cooling system） water in PWR （pressurized water reactor） cold legs during reflood phase of large-break LOCA （loss-of-coolant accident） was conducted in OECD/NEA ROSA Project using the LSTF （large scale test facility）. A new test section was furnished in the downstream of the LSTF break unit horizontally attached to the cold leg. Significant condensation of steam appeared in a short distance from the simulated ECCS injection point, and the steam temperature in the test section decreased immediately after the initiation of the ECCS water injection. Total steam condensation rate estimated from the difference between steam flow rates at the test section inlet and outlet was in proportion to the simulated ECCS water mass flux until the complete condensation of steam. Clear images of high-speed video camera were successfully obtained on droplet behaviors through the viewer of the test section, especially for annular mist flow.

Energy Storage System for Solar Thermal Air Conditioning Combined with Ejector Cooling System

A system of energy storage for solar thermal air conditioning combined with ejector cooling system for residential is determined in this paper. The purpose of this study is to design the energy storage system for heating the water in a storage tank to reach the required temperature for exchanging heat with the refrigerant of cooling system. The design from calculation of thermal energy storage system that proper with the solar flat plate collector area results are 70 m2, and the hot water temperature is over than 80 ℃. A cooling system is selected for refrigerant of R141b from the solar air conditioning system of 10.5 kW, and the energy source is solar thermal energy from the collector that there is an efficiency of 0.46 approximately. This storage system for the electric solar cooling system can be reduced the problem of the intermittent of energy source with the constant generating temperature to run the cooling system continuously.

The Comparison between Solar Water Distillation with and without a Cooling Tube

A solar still system is designed and built to utilize solar energy in the Gulf States region to produce fresh water from brackish and sea water. This experimental work has been conducted with and without a cooling tube. The results showed that the daily production rate of the simple solar still without a cooling tube is slightly higher than that with a cooling tube. This could be due to the fact that the cooling tube has a smaller effective condensation surface area than the glass cover of the simple still. The cooling tube also reduces the solar energy that reaches the water in the still. It might also be due to the fact that the use of a cooling tube has the effect of reducing the average temperature in the solar still cavity. This resulted in reducing the evaporation rate and consequently reduced the production rate.

Flow field optimization and design for a Spallation Neutron Source target cooling system

Cooling water is an important part in a Spallation Neutron Source target cooling system, but the unstable vortexes at the exits of the slits between every two tungsten target slices have a negative impact on the stable running of the target system. We apply the field synergy principle for fluid flow to obtain the optimal flow field, which has a uniform velocity distribution without eddy, and then, optimize the geometrical structure of the cooling water flow channel based on the optimal flow field. The results show that when the cooling water flows in the optimized channel, the eddy sizes decrease, the time fluctuations of velocity and pressure almost vanish, and the volume flow rates of the cooling water in each parallel slit are uniform. Therefore, it effectively improves the running stability of the target system with the premise of satisfying the target heat load.