A new metal-organic framework of MIL-101 was synthesized by hydrothermal method and the powder prepared was pressed into a desired shape. The effects of molding on specific surface area and pore structure were investi...A new metal-organic framework of MIL-101 was synthesized by hydrothermal method and the powder prepared was pressed into a desired shape. The effects of molding on specific surface area and pore structure were investigated using a nitrogen adsorption method. The water adsorption isotherms were obtained by high vacuum gravimetric method, the desorption temperature of water on shaped MIL-101 was measured by thermo gravimetric analyzer, and the adsorption refrigeration performance of shaped MIL-101-water working pair was studied on the simulation device of adsorption refrigeration cycle system. The results indicate that an apparent hysteresis loop ap-pears in the nitrogen adsorption/desorption isotherms when the forming pressure is 10 MPa. The equilibrium ad-sorption capacity of water is up to 0.95 kg·kg^-1 at the forming pressure of 3 MPa （MIL-101-3）. The desorption peak temperature of water on MIL-101-3 is 82℃, which is 7 ℃ lower than that of silica gel, and the desorption temperature is no more than 100 ℃. At the evaporation temperature of 10 ℃, the refrigeration capacity of MIL-101-3-water is 1059 kJ·kg^-1, which is 2.24 times higher than that of silica gel-water working pair. Thus MIL-101-water working pair presents an excellent adsorption refrigeration performance.展开更多
A predictive current control algorithm for the Buck-Boost DC-DC converter is presented in this paper. The continuous time model of the system is properly introduced, then, by imposing a proper PWM modulation pattern, ...A predictive current control algorithm for the Buck-Boost DC-DC converter is presented in this paper. The continuous time model of the system is properly introduced, then, by imposing a proper PWM modulation pattern, its discrete time model is achieved. This last one is successfully employed in determining the steady state locus of the Buck-Boost converter, both in CCM （continuous conduction mode） and DCM （discontinuous conduction mode）. A novel continuous time equivalent circuit of the converter is introduced too, with the aim of determining a ripple free representation of the state variables of the system, over both transient and steady state operation. Then, a predictive current control algorithm, suitable in both CCM and DCM, is developed and properly checked by means of computer simulations. The corresponding results have highlighted the effectiveness of the proposed modelling and of the predictive control algorithm, both in CCM and DCM.展开更多
文摘A new metal-organic framework of MIL-101 was synthesized by hydrothermal method and the powder prepared was pressed into a desired shape. The effects of molding on specific surface area and pore structure were investigated using a nitrogen adsorption method. The water adsorption isotherms were obtained by high vacuum gravimetric method, the desorption temperature of water on shaped MIL-101 was measured by thermo gravimetric analyzer, and the adsorption refrigeration performance of shaped MIL-101-water working pair was studied on the simulation device of adsorption refrigeration cycle system. The results indicate that an apparent hysteresis loop ap-pears in the nitrogen adsorption/desorption isotherms when the forming pressure is 10 MPa. The equilibrium ad-sorption capacity of water is up to 0.95 kg·kg^-1 at the forming pressure of 3 MPa （MIL-101-3）. The desorption peak temperature of water on MIL-101-3 is 82℃, which is 7 ℃ lower than that of silica gel, and the desorption temperature is no more than 100 ℃. At the evaporation temperature of 10 ℃, the refrigeration capacity of MIL-101-3-water is 1059 kJ·kg^-1, which is 2.24 times higher than that of silica gel-water working pair. Thus MIL-101-water working pair presents an excellent adsorption refrigeration performance.
文摘A predictive current control algorithm for the Buck-Boost DC-DC converter is presented in this paper. The continuous time model of the system is properly introduced, then, by imposing a proper PWM modulation pattern, its discrete time model is achieved. This last one is successfully employed in determining the steady state locus of the Buck-Boost converter, both in CCM （continuous conduction mode） and DCM （discontinuous conduction mode）. A novel continuous time equivalent circuit of the converter is introduced too, with the aim of determining a ripple free representation of the state variables of the system, over both transient and steady state operation. Then, a predictive current control algorithm, suitable in both CCM and DCM, is developed and properly checked by means of computer simulations. The corresponding results have highlighted the effectiveness of the proposed modelling and of the predictive control algorithm, both in CCM and DCM.
