某试验台高温高压管道结构设计研究

针对某型号燃烧室压力模化试验台高温高压管道展开设计,管道试压过程发生膨胀节变形,根据现场实际变形情况开展原因分析,提出膨胀节及试验台管道优化改进方案,通过开展有限元分析,论证了方案的可行性。根据优化改进方案进行现场调整,并开展高温高压联调测试,验证了优化改进方案的可行性。

Carvedilol protected diabetic rat hearts via reducing oxidative stress

Oxidative stress plays a dominant role in the pathogenesis of diabetes mellitus. Bcl-2 gene has close connection with antioxidant stress destruction in many diseases including diabetes. Carvedilol, an adrenoceptor blocker, also has antioxidant properties. To study the effect of carvedilol on the antioxidant status in diabetic hearts, we investigated carvedilol-administrated healthy and streptozotocin-induced diabetic rats. After small and large dosage carvedilol-administered for 5 weeks, hemodynamic parameters, the levels of malondialdehyde, activities of antioxidant enzymes and expression of Bcl-2 mRNA in the cardiac tissues were measured. The diabetic rats not only had cardiac disfunction, weaker activities of antioxidant enzymes, but also showed lower expression of Bcl-2. Carvedilol treatment increased activities of antioxidant enzymes and expression of Bcl-2 in healthy rats as well as diabetic rats. These results indicated that carvedilol partly improves cardiac function via its antioxidant properties in diabetic rats.

Mechanics Model to Determine Swelling Potential of Expansive Soils

The factors influencing on soil expansion are reviewed in the paper. A mechanics model to determine swelling potential of expansive soils is presented. The mechanics model is based on the softening of expansive soil following absorption of water. The constitutive relationships of the mechanics model include the relationship among swelling under free load, swelling under load, and vertical pressure, and the relationship of swelling under free loading and swelling pressure. A concept of additional compression modulus is introduced and the method determining the modulus is proposed. Finally, the predicted results of swelling potential using the mechanics model compare well with the measured data.

Simulation of Continuous Esterification Process of Polyester Polyols

Based on the kinetic and thermodynamic equations, a comprehensive mathematical model for the con- tinuous esterification process of polyester polyols was developed, which was carried out in an innovational bub- bling reactive distillation tower （BRDT） at atmospheric pressure. In this new type of reactor, direct esterification between ethylene glycol and adipic acid was accomplished efficiently and rapidly. A bench BRDT with the height of 2 m was applied for the esteriflcation process of l^oly （ethylene adlpate） （P＇EA）. In the continuous operation, Hn- ear oligomers were discharged from the bottom of the column, while water passed a few column trays and a pack- ing section as a condensation byproduct. The influence of major operating conditions on reactor performance was also simulated. Simulation results were in good agreement with experimental data, providing a strategy for devel- oping and optimizing this process.

Theoretical Model of the Tropospheric Pressure Variation on the Height

In the study and the research of the troposphere, the knowledge about its pressure variation on the height is necessary and important. Of course, exist the sounding to make this work, but not always it is possible to access to sounding data when is necessary, so then, it is important to has others alternatives methods in order to replace it. The troposphere is basically a fluid, susceptible to be studied under the fluid mechanics and thermodynamics of the ideals gases without loss generalities. So, it is possible to study of the atmospheric air like as a continuous perfect gas. These facts are important questions to study the troposphere under the laws and beginning Physics, using its respective equations, in order to get a theoretical model to simulate the behavior of its thermodynamics variables and parameters. Working on this line, it was developed a model in order to simulate the tropospheric pressure variation on the height from its measure on surface data.

Application of Discrete Lumped Kinetic Modeling on Vacuum Gas Oil Hydrocracking

The kinetic model of vacuum gas oil （VGO） hydrocracking based on discrete lumped approach was investigated, and some improvement was put forward at the same time in this article. A parallel reaction scheme to describe the conver- sion of VGO into products （gases, gasoline, and diesel） proposed by Orochko was used. The different experimental data were analyzed statistically and then the product distribution and kinetic parameters were simulated by available data. Fur- thermore, the kinetic parameters were correlated based on the feed property, reaction temperature, and catalyst activity. An optimization code in Matlab 2011b was written to fine-me these parameters. The model had a favorable ability to predict the product distribution and there was a good agreement between the model predictions and experiment data. Hence, the ki- netic parameters indeed had something to do with feed properties, reaction temperature and catalyst activity.

A Method of Catchments Health Assessment under Value-pressure Model and Its Application in Urbanized River Network Area:A Case Study in Shanghai,China

Catchments health assessment is fundamental to effective catchments management. Generally, an assessment method should be selected to reflect both the purpose of assessment and local characteristics. A trial in Shanghai was conducted to test the method for catchments health assessment in urbanized fiver network area. Seven indicators that described four dimensions of river, river network, land use and function, and local feature were used to assess catchments values; while possible change rate of urbanization and industrialization in the next 3 years were chosen for catchments pressure assessment in the value-pressure model. Factors related to catchments classification, indicators measurement and protection priority have been considered in the development strategies for catchments health management. The results showed that value-pressure assessment was applicable in urbanized catchments health management, particularly when both human and catchments had multiple demands. As a result of over 30-year rapid urbanization, more than 70% of Shanghai fiver network area was still in a healthy condition with high catchments values, among them, 39.3% was under high pressure. Poor water quality, simplified river system and weakened local feature of fiver pattern had largely affected catchments health in Shanghai. Lack of long-term monitoring data would seriously restrict the development and validity of catchments health assessment.

A Model of Turbulent-Laminar Gas-Liquid Stratified Flow

The time-dependent liquid film thickness and pressure drop are measured by using parallel-wire conduc tance probes and capacitance differential-pressure transducer. A mathematical model with iterative procedure to calculate holdup and pressure drop in horizontal and inclined gas-liquid stratified flow is developed. The predictions agree well with over a hundred experimental data in 0.024 and 0.04 m diameter pipelines.

Dynamic Model for Evaluation of Risk Factors During Work in Hot Environment

Mathematical model is developed for prediction of physiological changes in man during work in hot environment taking into consideration intensity of work, clothing and environment. To evaluate human functional state the heat stress index was calculated. Modeling researches made the conclusion that the main risk factor during work in hot environment is water losses that happens through thermoregulatory sweat evaporation. Modeling showed that in humid environment man wearing protective clothing has short time to work as water losses became more than 2% of human weight that means body dehydration. Preliminary model prediction can be used as preventive method to avoid hazard of human health.

Time Evolution,Dynamical Quantum Fluctuation and High-Order Squeezing Feature in Polariton System——Ⅰ

We have set up a new reduced model Hamiltonian for the polariton system, in which the nonlinear interaction contains the rotating term k l （ a ＋ b ＋ ab＋） and the attractive two-mode squeezed coupling - k2 （ a ＋ b＋ ＋ ab ） . The dynamical evolution of this system has been solved and the nonclassical features relevant to the second-order and high-order squeezing have been obtained in an analytical form. For the first time, in contrast to the existing result, we have confirmed for the phonon field that the attractive two-mode squeezed interaction will not only result in the second-order and high-order squeezing in X-component with the time evolution, but also in time average. Furthermore, the phenomena of collapse and revival of inversion will occur as well in the time evolution of the average number of photon and phonon, as also in the second-order and high-order squeezing of photon field, particularly, in the high-order squeezing of phonon field.

OPTIMIZATION OF A REDUCED CHEMICAL KINETIC MODEL FOR HCCI ENGINE SIMULATIONS BY MICRO-GENETIC ALGORITHM

A reduced chemical kinetic model （44 species and 72 reactions） for the homogeneous charge compression ignition （HCCI） combustion of n-heptane was optimized to improve its autoignition predictions under different engine operating conditions. The seven kinetic parameters of the optimized model were determined by using the combination of a micro-genetic algorithm optimization methodology and the SENKIN program of CHEMKIN chemical kinetics software package. The optimization was performed within the range of equivalence ratios 0.2-1.2, initial temperature 310- 375 K and initial pressure 0, 1-0.3 MPa, The engine simulations show that the optimized model agrees better with the detailed chemical kinetic model （544 species and 2 446 reactions） than the original model does.

Pore-scale visualization on a depressurization-induced CO2 exsolution

The pore-scale behavior of the exsolved CO_2 phase during the depressurization process in CO_2 geological storage was investigated.The reservoir pressure decreases when the injection stops or when a leaking event or fluid extraction occurs.The exsolution characteristics of CO_2 affect the migration and fate of CO_2 in the storage site significantly.Here,a micromodel experimental system that can accommodate a large pressure variation provides a physical model with homogeneous porous media to dynamically visualize the nucleation and growth of exsolved CO_2 bubbles.The pressure decreased from 9.85 to 3.95 MPa at different temperatures and depressurization rates,and the behavior of CO_2 bubbles was recorded.At the pore-scale,the nuclei became observable when the CO_2 phase density was significantly reduced,and the pressure corresponding to this observation was slightly lower than that of the severe expansion pressure region.The lower temperature and faster depressurization rate produced more CO_2 nuclei.The exsolved CO_2 bubble preferentially grew into the pore body instead of the throat.The progress of smaller CO_2 bubbles merging into a larger CO_2 bubble was first captured,which validated the existence of the Ostwald ripening mechanism.The dispersed CO_2 phase after exsolution shows similarity with the residually trapped CO_2.This observation is consistent with the low mobility and high residual trapping ratio of exsolved CO_2 measured in the core-scale measurement,which is considered to be a self-sealing mechanism during depressurization process in CO_2 geological storage.

Validation of dynamic cavitation model for unsteady cavitating flow on NACA66

Unsteady cavitating flow is extremely complicated and brings more serious damages and unignorable problems compared with steady cavitating flow.CFD has become a practical way to model cavitation;however,the popularly used full cavitation model cannot reflect the pressure-change that the bubble experiences during its life path in the highly unsteady flow like cloud cavitating.Thus a dynamic cavitation model(DCM)is proposed and it has been considered to have not only the first-order pressure effects but also zero-order effect and can provide greater insight into the physical process of bubble producing,developing and collapsing compared to the traditional cavitation model.DCM has already been validated for steady cavitating flow,and the results were reported.Furthermore,DCM is designed and supposed to be more accurate and efficient in modeling unsteady cavitating flow,which is also the purpose of this paper.The basic characteristic of the unsteady cavitating flow,such as the vapor volume fraction distribution and the evolution of pressure amplitude and frequency at different locations of the hydrofoil,are carefully studied to validate DCM.It is found that not only these characteristics mentioned above accord well with the experimental results,but also some detailed transient flow information is depicted,including the re-entrant jet flow that caused the shedding of the cavity,and the phenomenon of two-peak pressure fluctuation in the vicinity of the cavity closure in a cycle.The numerical results validate the capability of DCM for the application of modeling the complicated unsteady cavitating flow.

The evolution of multi-component visual signals in darters （genus Etheostoma）

As complex traits evolve, each component of the trait may be under different selection pressures and could respond independently to distinct evolutionary forces. We used comparative methods to examine patterns of evolution in multiple components of a complex courtship signal in darters, specifically addressing the question of how nuptial coloration evolves across different areas of the body. Using spectral reflectance, we defined 4 broad color classes present on the body and fins of 17 species of freshwater fishes （genus Etheostoma） and quantified differences in hue within each color class. Ancestral state reconstruction suggests that most color traits were expressed in the most recent common ancestor of sampled species and that differences among species are mostly due to losses in coloration. The evolutionary lability of coloration varied across body regions; we found sig- nificant phylogenetic signal for orange color on the body but not for most colors on fins. Finally, patterns of color evolution and hue Of the colors were correlated among the two dorsal fins and between the anterior dorsal and anal fins, but not between any of the fins and the body. The observed patterns support the hypothesis that different components of complex signals may be subject to distinct evolutionary pressures, and suggests that the combination of behavioral displays and morphology in communication may have a strong influence on patterns of signal evolution .

Fast Generation of Einstein–Podolsky–Rosen States for Two Cavity Modes with a Collection of Driven Atoms

We propose an efficient scheme for realizing two-mode squeezing for two cavity modes with an atomic ensemble trapped in the cavity and driven by two classical fields. Through a suitable choice of the driving classical fields, the evolution dynamics of the two cavity modes is decoupled with the atomic system and described by a two-mode squeezing operator. We show that a highly squeezed state can be obtained at the output even with a bad cavity. The required experimental techniques are within the scope of what can be obtained in the BEG-cavity setup.

Overall optimization of Rankine cycle system for waste heat recovery of heavy-duty vehicle diesel engines considering the cooling power consumption

The Rankine cycle system for waste heat recovery of heavy-duty vehicle diesel engines has been regarded as a promising tech- nique to reduce fuel consumption. Its heat dissipation in the condensation process, however, should be take：l away in time, which is an energy-consuming process. A fan-assisted auxiliary water-cooling system is employed in this paper. Results at 1300 r/min and 50% load indicate that the cooling pump and cooling fan together consume 7.66% of the recovered power. What＇s worse for the heavy load, cooling accessories may deplete of all the recovered power of the Rankine cycle system. Af- terwards, effects of the condensing pressure and water feeding temperature are investigated, based on which a cooling power consumption model is established. Finally, an overall efficiency optimization is conducted to balance the electric power gener- ation and cooling power consumption, taking condensing pressure, pressure ratio and exhaust bypass valve as major variables. The research suggests that the priority is to increase condensing pressure and open exhaust bypass valve appropriately at high speed and heavy load to reduce the cooling power consumption, while at low speed and light load, a lower condensing pressure is favored and the exhaust bypass valve should be closed making the waste heat recovered as much as possible. Within the sub-critical region, a larger pressure ratio yields higher overall efficiency improvement at medium-low speed and load. But the effects taper off at high speed and heavy load. For a given vehicular heavy-duty diesel engine, the overall e：＇ficiency can be improved by 3.37% at 1300 r/min and 25% load using a Rankine cycle system to recover exhaust energy. The improvement becomes smaller as engine speed and load become higher.

Grand canonical Monte Carlo simulation for hydrogen uptakes based on nanoporous NaBH_4

A new hydrogen storage route of 3D nanoporous sodium borohydride (NPSB) generated by removing special atoms is proposed in this work. Three different size pores of NPSB-1 (7), NPSB-2 (10) and NPSB-3 (14) are presented, and the hydrogen storage capacities of these NPSBs are simulated by employing a grand canonical Monte Carlo (GCMC) procedure for a temperature range of 77-298 K and a pressure range of 0.1-100 bar. The effects of pore diameter, temperature and pressure on the hydrogen adsorption have been examined. The results show that the adsorption of hydrogen decreases and increases with increasing temperature and hydrogen pressure, respectively. It also reflects that the hydrogen adsorption capacities at higher pressures are dependent on pore diameter, while independent of pore diameter at lower pressures.

Design and experimental validation of looped-tube thermoacoustic engine

The aim of this paper is to present the design and experimental validation process for a thermoacoustic looped-tube engine. The design procedure consists of numerical modelling of the system using DELTA EC tool, Design Environment for Low-amplitude ThermoAcousfic Energy Conversion, in particular the effects of mean pressure and regenerator configuration on the pressure amplitude and acoustic power generated. This is followed by the construction of a practical engine system equipped with a ceramic regenerator - a substrate used in auto- motive catalytic converters with fine square channels. The preliminary testing results are obtained and compared with the simulations in detail.The measurement results agree very well on the qualitative level and are reasonably close in the quantitative sense.