Pressure fluctuation in the submerged circulative impinging stream reactor （SCISR） is studied by measuring the dynamic pressure with micro pressure sensors of high accuracy, with water as the process material. Exper...Pressure fluctuation in the submerged circulative impinging stream reactor （SCISR） is studied by measuring the dynamic pressure with micro pressure sensors of high accuracy, with water as the process material. Experimental results show that the maximum amplitude of fluctuation can be up to about 1.6kPa. On the power spectra the fluctuation is relatively concentrated in the range of 〈1000Hz, with some weak peeks in acoustic wave range. The space profile of intensive fluctuation region in the reactor is determined. The region is found to take the form of a couple truncated cones of empty core, with coincided bottoms, and is symmetrical with respect to the impinging plane and approximately symmetrical about the axis, essentially independent of u0. The integral intensity of fluctuation increases as the impinging velocity, Uo increasing.展开更多
A high sensitivity fiber Bragg grating pressure sensor by using mechanical amplifier is demonstrated. The measured pressure sensitivity is -1.80×10 -4 /MPa, which is about two orders of magnitude better than a si...A high sensitivity fiber Bragg grating pressure sensor by using mechanical amplifier is demonstrated. The measured pressure sensitivity is -1.80×10 -4 /MPa, which is about two orders of magnitude better than a simple monomode fiber with an in-fiber grating. The resolution of pressure measurement is 0.015 MPa based on interrogation using tunable fiber grating filter.展开更多
Breaking waves can have tremendous destructive impact on vertical walls, yet they are poorly understood. By using particle imaging velocimetry （PIV） technology and high-precision pressure transducers, actual breakin...Breaking waves can have tremendous destructive impact on vertical walls, yet they are poorly understood. By using particle imaging velocimetry （PIV） technology and high-precision pressure transducers, actual breaking wave loads on vertical walls were studied. By simultaneously comparing the flow field structure and wave pressure, the mechanisms of breaking wave pressure could be analyzed. The probability distribution of the peak value of the first impact of a breaking wave was investigated. The results showed that the impact pressure p is mainly distributed in the range of 0.25-2.75 pv2, with the greatest possible probability at p/pv2 = 0.75.展开更多
In this paper, a two-dimensional photonic crystal （2DPC） based pressure sensor is proposed and designed, and the sensing characteristics such as the sensitivity and dynamic range are analyzed over the range of press...In this paper, a two-dimensional photonic crystal （2DPC） based pressure sensor is proposed and designed, and the sensing characteristics such as the sensitivity and dynamic range are analyzed over the range of pressure from 0 GPa to 7 GPa. The sensor is based on 2DPC with the square array of silicon rods surrounded by air. The sensor consists of two photonic crystal quasi waveguides and L3 defect. The L3 defect is placed in between two waveguides and is formed by modifying the radius of three Si rods. It is noticed that through simulation, the resonant wavelength of the sensor is shifted linearly towards the higher wavelength region while increasing the applied pressure level. The achieved sensitivity and dynamic range of the sensor is 2 nm/GPa and 7 Gpa, respectively.展开更多
基金the National Natural Science Foundation of China （No.29276260, No.20176043）.ACKN0WLEDGEMENT The authors would like to thank Dr. Zhang Jian- wei who worked a lot in preparation of the apparatus for pressure fluctuation measurements.
文摘Pressure fluctuation in the submerged circulative impinging stream reactor （SCISR） is studied by measuring the dynamic pressure with micro pressure sensors of high accuracy, with water as the process material. Experimental results show that the maximum amplitude of fluctuation can be up to about 1.6kPa. On the power spectra the fluctuation is relatively concentrated in the range of 〈1000Hz, with some weak peeks in acoustic wave range. The space profile of intensive fluctuation region in the reactor is determined. The region is found to take the form of a couple truncated cones of empty core, with coincided bottoms, and is symmetrical with respect to the impinging plane and approximately symmetrical about the axis, essentially independent of u0. The integral intensity of fluctuation increases as the impinging velocity, Uo increasing.
基金The National Natural Science Foundation of China
文摘A high sensitivity fiber Bragg grating pressure sensor by using mechanical amplifier is demonstrated. The measured pressure sensitivity is -1.80×10 -4 /MPa, which is about two orders of magnitude better than a simple monomode fiber with an in-fiber grating. The resolution of pressure measurement is 0.015 MPa based on interrogation using tunable fiber grating filter.
基金Supported by the National Natural Science Foundation of China under Grant No.50679008
文摘Breaking waves can have tremendous destructive impact on vertical walls, yet they are poorly understood. By using particle imaging velocimetry （PIV） technology and high-precision pressure transducers, actual breaking wave loads on vertical walls were studied. By simultaneously comparing the flow field structure and wave pressure, the mechanisms of breaking wave pressure could be analyzed. The probability distribution of the peak value of the first impact of a breaking wave was investigated. The results showed that the impact pressure p is mainly distributed in the range of 0.25-2.75 pv2, with the greatest possible probability at p/pv2 = 0.75.
文摘In this paper, a two-dimensional photonic crystal （2DPC） based pressure sensor is proposed and designed, and the sensing characteristics such as the sensitivity and dynamic range are analyzed over the range of pressure from 0 GPa to 7 GPa. The sensor is based on 2DPC with the square array of silicon rods surrounded by air. The sensor consists of two photonic crystal quasi waveguides and L3 defect. The L3 defect is placed in between two waveguides and is formed by modifying the radius of three Si rods. It is noticed that through simulation, the resonant wavelength of the sensor is shifted linearly towards the higher wavelength region while increasing the applied pressure level. The achieved sensitivity and dynamic range of the sensor is 2 nm/GPa and 7 Gpa, respectively.
