This paper suggested to reformulate cylindrical deep drawing parameters with dimensionless form. A diagram, in which a feasible zone is drawn to bound both the maximal allowable tension and compression stress during t...This paper suggested to reformulate cylindrical deep drawing parameters with dimensionless form. A diagram, in which a feasible zone is drawn to bound both the maximal allowable tension and compression stress during the deep drawing process, was established. Since it is presented in a dimensionless form, it may be applied for both conventional and micro deep drawing. Cylindrical cup deep drawing was taken as an example to show the dimensionless process design method. In addition, the size effects should be taken into account. Two kinds of size effects on micro deep drawing were investigated, which can be explained by surface layer model and strain gradient model. Numerical simulations were carried out to compare the strain distribution with or without consideration of size effect.展开更多
In order to reduce powder temperature to lower than 100℃ in warm compaction by changing polymer lubricant design, powder flowability, warm compacting behavior, lubricating mode as well as ultimate tensile strength af...In order to reduce powder temperature to lower than 100℃ in warm compaction by changing polymer lubricant design, powder flowability, warm compacting behavior, lubricating mode as well as ultimate tensile strength after sinter-hardening and tempering were investigated systematically. By means of low temperature warm pressing and sintered hardening technique, samples with the sintered densities of 7.407.45g/cm3 and the strengths of 950 1390MPa are achieved as the early compacting pressure is 686735MPa.展开更多
基金The National Natural Science Foundation of China (No50275059, 50005008)
文摘This paper suggested to reformulate cylindrical deep drawing parameters with dimensionless form. A diagram, in which a feasible zone is drawn to bound both the maximal allowable tension and compression stress during the deep drawing process, was established. Since it is presented in a dimensionless form, it may be applied for both conventional and micro deep drawing. Cylindrical cup deep drawing was taken as an example to show the dimensionless process design method. In addition, the size effects should be taken into account. Two kinds of size effects on micro deep drawing were investigated, which can be explained by surface layer model and strain gradient model. Numerical simulations were carried out to compare the strain distribution with or without consideration of size effect.
文摘In order to reduce powder temperature to lower than 100℃ in warm compaction by changing polymer lubricant design, powder flowability, warm compacting behavior, lubricating mode as well as ultimate tensile strength after sinter-hardening and tempering were investigated systematically. By means of low temperature warm pressing and sintered hardening technique, samples with the sintered densities of 7.407.45g/cm3 and the strengths of 950 1390MPa are achieved as the early compacting pressure is 686735MPa.
