The mechanical properties of the Mg97ZnlY2 extruded alloy containing the long-period stacking ordered phase, the so-called LPSO-phase, with a volume fraction of 24%-25%, were examined by compression tests and cyclic t...The mechanical properties of the Mg97ZnlY2 extruded alloy containing the long-period stacking ordered phase, the so-called LPSO-phase, with a volume fraction of 24%-25%, were examined by compression tests and cyclic tension-compression deformation tests. The plastic behavior of the extruded alloys with compositions of Mg99.2Zn0.2Y0.6 and Mg89Zn4Y7 （molar fraction, %）, which were almost the same compositions of Mg matrix phase and LPSO phase in Mg97Zn1Y2 Mg/LPSO two-phase alloy, respectively, were also prepared. By comparing their mechanical properties, the strengthening mechanisms operating in the Mg97Zn1 Y2 extruded alloy were discussed. Existence of the LPSO-phase strongly enhanced the refinement of Mg matrix grain size during extrusion, which led to a large increment of the strength of alloy. In addition, the LPSO-phases, which were aligned along the extrusion direction in Mg97Zn1Y2 extruded alloy, acted as hardening phases, just like reinforced fibers.展开更多
Experimental data on the pressure drop across different types of elbow for non-Newtonian pseudoplastic liquid flow in laminar condition have been presented. A generalized correlation has been developed for predicting ...Experimental data on the pressure drop across different types of elbow for non-Newtonian pseudoplastic liquid flow in laminar condition have been presented. A generalized correlation has been developed for predicting the frictional pressure drop across the elbows in the horizontal plane.展开更多
Thermal upgrading of vacuum residue mixed with waste plastics was studied in a laboratory scale delayed coking unit.The model of feed thermal decomposition was set up and the first order reaction kinetics was used to ...Thermal upgrading of vacuum residue mixed with waste plastics was studied in a laboratory scale delayed coking unit.The model of feed thermal decomposition was set up and the first order reaction kinetics was used to predict products distribution during the coking process.The distillate yield was higher(70%) for the vacuum residue/polystyrene(VR/PS) feed system and the vacuum residue/low density polyethylene(VR/LDPE) feed system.The resulted distillate yield was separated into fractions according to their boiling points,with gasoline and diesel being our fractions of concern.The activation energy was higher for gasoline production(around 60 kcal/mol) varying with the type of feed system,while it was 33 kcal/mol for diesel fraction.The regression coefficient R was 0.990.展开更多
基金supported by the project"Development of Key Technology for Next-generation Heat-resistant Magnesium Alloys,Kumamoto Prefecture Collaboration of Regional Entities for the Advancement of Technological Excellence"from Japan Science and Technology Agencyby funds from the"Priority Assistance of the Formation of Worldwide Renowned Centers of Research-The 21st Century COE Program and Global COE Program(Project:Center of Excellence for Advanced Structural and Functional Materials Design)"a Grant-in-Aid for Scientific Research and Development from the Ministry of Education,Culture,Sports,Science and Technology of Japan
文摘The mechanical properties of the Mg97ZnlY2 extruded alloy containing the long-period stacking ordered phase, the so-called LPSO-phase, with a volume fraction of 24%-25%, were examined by compression tests and cyclic tension-compression deformation tests. The plastic behavior of the extruded alloys with compositions of Mg99.2Zn0.2Y0.6 and Mg89Zn4Y7 （molar fraction, %）, which were almost the same compositions of Mg matrix phase and LPSO phase in Mg97Zn1Y2 Mg/LPSO two-phase alloy, respectively, were also prepared. By comparing their mechanical properties, the strengthening mechanisms operating in the Mg97Zn1 Y2 extruded alloy were discussed. Existence of the LPSO-phase strongly enhanced the refinement of Mg matrix grain size during extrusion, which led to a large increment of the strength of alloy. In addition, the LPSO-phases, which were aligned along the extrusion direction in Mg97Zn1Y2 extruded alloy, acted as hardening phases, just like reinforced fibers.
文摘Experimental data on the pressure drop across different types of elbow for non-Newtonian pseudoplastic liquid flow in laminar condition have been presented. A generalized correlation has been developed for predicting the frictional pressure drop across the elbows in the horizontal plane.
文摘Thermal upgrading of vacuum residue mixed with waste plastics was studied in a laboratory scale delayed coking unit.The model of feed thermal decomposition was set up and the first order reaction kinetics was used to predict products distribution during the coking process.The distillate yield was higher(70%) for the vacuum residue/polystyrene(VR/PS) feed system and the vacuum residue/low density polyethylene(VR/LDPE) feed system.The resulted distillate yield was separated into fractions according to their boiling points,with gasoline and diesel being our fractions of concern.The activation energy was higher for gasoline production(around 60 kcal/mol) varying with the type of feed system,while it was 33 kcal/mol for diesel fraction.The regression coefficient R was 0.990.
