Difficulties with soft coal seams having a high gas content and high stress levels can be addressed by a technology of pressure relief and permeability increase.Slotting the seam by auxiliary drilling with a water jet...Difficulties with soft coal seams having a high gas content and high stress levels can be addressed by a technology of pressure relief and permeability increase.Slotting the seam by auxiliary drilling with a water jet that breaks the coal and slots the coal seam during the process of retreat drilling achieves pressure relief and permeability increase.Improved efficiency of gas extraction from a field test,high gas coal seam was observed.Investigating the theory of pressure relief and permeability increase required analyzing the characteristics of the double power slotting process and the effects of coal pressure relief and permeability increase.The influence of confining pressure on coal physical properties was examined by using FLAC3D software code to simulate changes of coal stress within the tool destruction area.The double power joint drilling method was modeled.Field experiments were performed and the effects are analyzed.This research shows that there is an ''islanding effect'' in front of the joint double power drill and slotting equipment.The failure strength of the coal seam is substantially reduced within the tool destruction area.Drilling depths are increased by 72% and the diameter of the borehole is increased by 30%.The amount of powdered coal extracted from the drill head increases by 17 times when using the new method.A 30 day total flow measurement from the double power drilled and slotted bores showed that gas extraction increased by 1.3 times compared to the standard drilled bores.Gas concentrations increased from 30% to 60% and were more stable so the overall extraction efficiency increased by a factor of two times.展开更多
The three-dimensional damage constitutive relationship of coal is established and distribution law of the abutment pressure of the integrated coal beside the road-in packing for gob-side entry retaining in fully-mecha...The three-dimensional damage constitutive relationship of coal is established and distribution law of the abutment pressure of the integrated coal beside the road-in packing for gob-side entry retaining in fully-mechanized caving face under the effect of given deformation of the main roof is analyzed by the damage mechanics theory. And the relationship between distribution of the abutment pressure and thickness of coal seam is explored. The presented result is of great theoretical significance and practical value to the study on stability control of the surrounding rock of road-in packing for gob-side entry retaining in fully-mechanized caving face.展开更多
The top-coal failing ability is a key factor to analyze for the application of coal mining with top-coal caving. Based on a hard-and-thick strata, which acts both as the floor of the upper coal seam and as the roof of...The top-coal failing ability is a key factor to analyze for the application of coal mining with top-coal caving. Based on a hard-and-thick strata, which acts both as the floor of the upper coal seam and as the roof of the lower coal seam, nine mining projects wcrc put forward to examine the mining of upper and lower coal seams, and a numerical simulation was used to study in detail the corresponding top-coal compressed volume of the lower coal seam. By the simulation effects of different layouts of coalface, the rational mining method was determined to bc the staggered layout of coalface in the upper and the lower coal seam. This can ensure the successful use of fully-mechanized coalfacc with top--coal caving in the lower coal seam.展开更多
In order to understand the effect of mining height and floor lithology at the upper protective layer face on the pressure relief of protected coal seams, this paper uses a numerical simulation method to model the pres...In order to understand the effect of mining height and floor lithology at the upper protective layer face on the pressure relief of protected coal seams, this paper uses a numerical simulation method to model the pressure changes at protected coal seam during mining upper protective layer. The results show that the taller the mining height at the upper protective layer face, the greater the protection on protected coal seam due to the higher level of pressure release; the upper protective layer face with hard rock floor impedes the pressure release at the protected coal seam, which affects the overall effect of the pressure release at protected coal seam using the protective layer mining method.展开更多
High purity (99.999% or 5N, mass fraction) indium (In) was obtained through vacuum distillation using a 2N (99%) In as input material under a dynamic vacuum of 5 Pa. The glow discharge mass spectrometry (GDMS)...High purity (99.999% or 5N, mass fraction) indium (In) was obtained through vacuum distillation using a 2N (99%) In as input material under a dynamic vacuum of 5 Pa. The glow discharge mass spectrometry (GDMS) was applied for the analysis of input material and the distilled indium. The results indicate that high-volatile impurities namely Cd, Zn, T1 and Pb can be removed from the indium matrix at the low fraction stage of 1 223 K for 120 min; Low-volatile impurities such as Fe, Ni, Cu, Sn can be reduced at the high fraction stage of 1 323 K for 120 min. The separation coefficient ,8i and activity coefficient Yi of impurities are calculated according to the experiments to fill the inadequate data of the thermodynamics.展开更多
Given the problem of the long time required for testing gas pressure, we propose a fast-test method in which we used a technique of fast borehole sealing and air replenishing. Based on the characteristics of gas emiss...Given the problem of the long time required for testing gas pressure, we propose a fast-test method in which we used a technique of fast borehole sealing and air replenishing. Based on the characteristics of gas emission from boreholes to be tested, we built a theoretical model for calculating parameters during the process of increasing natural pressure and aeration. Using this model, we investigated the effect of different aeration conditions on velocity of pressure tests. The result shows that: 1) aerating air into boreholes can speed up gas pressure tests and 2) the more similar the pressure of the aerated air to the original gas pressure, the smaller the gas volume absorbed by coal and the shorter the time needed in pressure test. A case study in the Lu’an mining area shows that the time needed for gas pressure test is only 4 h using our method of aeration and 29 h under conditions of increasing natural pressure, saving time by 86.2%. This case study also indicates that, by using the aeration method, only one hour is needed for gas pressure to reach a stable state, which breaks the record of the shortest time needed for gas pressure tests in China.展开更多
Objective: To observe the clinical efficacy of auricular point pricking-bloodletting plus auricular point sticking therapy for acne vulgaris. Methods: A total of 66 patients with acne vulgaris were randomized into an ...Objective: To observe the clinical efficacy of auricular point pricking-bloodletting plus auricular point sticking therapy for acne vulgaris. Methods: A total of 66 patients with acne vulgaris were randomized into an observation group and a control group by the random number table, with 33 cases in each group. The observation group was treated with auricular point pricking-bloodletting plus auricular point sticking therapy, and the control group was treated only with auricular point sticking therapy. The treatments of both groups were performed twice a week, 4 weeks as a course of treatment, for 3 courses in total. The scores of skin lesions and dermatology life quality index (DLQI) scores were recorded before and after treatment to assess the clinical efficacy. Results: During the trial, there were 3 cases of drop-out both in the observation group and the control group. After 3 courses of treatment, the total effective rate of the observation group was 96.7%, while that of the control group was 76.7%. The difference between the two groups was statistically significant (P<0.05). The intra-group comparison showed that the scores of skin lesion and DLQI were both decreased with the increase of treatment times, that was, the scores were lower than those at the previous time point (allP<0.05). After 1, 2, and 3 courses of treatment, the scores of skin lesion and DLQI of both groups were statistically different from those of the same group before treatment (allP<0.05). At every time point during the treatment, the scores of skin lesion and DLQI of the observation group were lower than those of the control group, and the differences between the two groups were statistically significant (all P<0.05). Conclusion: Auricular point pricking-bloodletting plus auricular point sticking has a better curative effect than auricular point sticking therapy alone in the treatment of acne vulgaris, and has a time-effect correlation.展开更多
Objective: To investigate the clinical efficacy of combining auricular and routine acupuncture for peripheral facial paralysis in acute stage. Methods: A total of 60 eligible cases were randomly allocated into a tre...Objective: To investigate the clinical efficacy of combining auricular and routine acupuncture for peripheral facial paralysis in acute stage. Methods: A total of 60 eligible cases were randomly allocated into a treatment group (n=30) and a control group (n=30). Cases in treatment group received auricular and routine acupuncture, whereas cases in the control group received routine acupuncture alone. Both groups were treated for 10 d. Results: The recovery rate was 73.3% in the treatment group and 53.3% in the control group, showing a statistical difference (P〈0.05). Conclusion: Combining auricular and routine acupuncture is effective for peripheral facial paralysis in acute stage and has a better effect than routine acupuncture.展开更多
Due to overvoltage produced by inverter output,inverter-fed motor insulation systems often experience fast electrical aging process,especially when partial discharge(PD) is incepted.Before putting into use,the PD dete...Due to overvoltage produced by inverter output,inverter-fed motor insulation systems often experience fast electrical aging process,especially when partial discharge(PD) is incepted.Before putting into use,the PD detection should be performed on inverter-fed motors at repetitive square voltages to avoid the PD caused insulation deterioration when the motors are collected to inverters having specific characteristics.However,unlike PD tests at AC/DC voltages proposed in IEC 60270,the PD detection at repetitive square voltages is much more complex because of serious interference generated by impulse generator.To solve the problem,ultra-high frequency(UHF) method seems recommendable for its preferable signal-to-noise ratio(SNR).The chief aim of this study is to investigate PD pulse and statistical characteristics of turn-to-turn insulation for inverter-fed traction motors.A square-shaped Archimedes antenna,specially designed for the PD detection at repetitive square voltages of fast rise times,was used to perform PD tests on turn-to-turn insulation models.Time and frequency analysis results indicate that energy component of generator disturbance and PD pulses are mainly distributed in the 0-0.5 GHz and 0.6-1.5 GHz range,respectively.Based on the results,suitable filter was designed for power disturbance suppression.Additionally,resorting to the sensor unit(i.e.antenna and filter) and the PD test system,the PD statistical features at square voltages of different frequencies were obtained.Experimental results show that higher frequency will give rise,statistically,to PD of lower magnitudes distributing at smaller phases.A reasonable interpretation of this phenomenon was presented.Lastly,according to the PD statistical features,some suggestions for the PD detection system design,generator parameter optimization and the PD pulse extracting were given.The results of this work would be beneficial to the increase of the sensitivity when performing the PD detection on insulation systems for inverter-fed motors at repetitive square voltages and thus,improving the reliability of inverter-fed motors.展开更多
基金supports provided by the National Key Basic Research and Development Program of China (No. 2011CB201205)the National Natural Science Foundation of China (No. 51074161)the Independent research of State Key Laboratory of Coal Resources and Mine Safety of China University of Mining & Technology (No. SKLCRSM08X03)
文摘Difficulties with soft coal seams having a high gas content and high stress levels can be addressed by a technology of pressure relief and permeability increase.Slotting the seam by auxiliary drilling with a water jet that breaks the coal and slots the coal seam during the process of retreat drilling achieves pressure relief and permeability increase.Improved efficiency of gas extraction from a field test,high gas coal seam was observed.Investigating the theory of pressure relief and permeability increase required analyzing the characteristics of the double power slotting process and the effects of coal pressure relief and permeability increase.The influence of confining pressure on coal physical properties was examined by using FLAC3D software code to simulate changes of coal stress within the tool destruction area.The double power joint drilling method was modeled.Field experiments were performed and the effects are analyzed.This research shows that there is an ''islanding effect'' in front of the joint double power drill and slotting equipment.The failure strength of the coal seam is substantially reduced within the tool destruction area.Drilling depths are increased by 72% and the diameter of the borehole is increased by 30%.The amount of powdered coal extracted from the drill head increases by 17 times when using the new method.A 30 day total flow measurement from the double power drilled and slotted bores showed that gas extraction increased by 1.3 times compared to the standard drilled bores.Gas concentrations increased from 30% to 60% and were more stable so the overall extraction efficiency increased by a factor of two times.
基金Supported by the National Science Foundation of China (50874042, 50674046)National Science Important Foundation (50634050)Hunan Science Foundation (06JJ50092)
文摘The three-dimensional damage constitutive relationship of coal is established and distribution law of the abutment pressure of the integrated coal beside the road-in packing for gob-side entry retaining in fully-mechanized caving face under the effect of given deformation of the main roof is analyzed by the damage mechanics theory. And the relationship between distribution of the abutment pressure and thickness of coal seam is explored. The presented result is of great theoretical significance and practical value to the study on stability control of the surrounding rock of road-in packing for gob-side entry retaining in fully-mechanized caving face.
基金Projects 50374065 supported by National Natural Science Foundation of China
文摘The top-coal failing ability is a key factor to analyze for the application of coal mining with top-coal caving. Based on a hard-and-thick strata, which acts both as the floor of the upper coal seam and as the roof of the lower coal seam, nine mining projects wcrc put forward to examine the mining of upper and lower coal seams, and a numerical simulation was used to study in detail the corresponding top-coal compressed volume of the lower coal seam. By the simulation effects of different layouts of coalface, the rational mining method was determined to bc the staggered layout of coalface in the upper and the lower coal seam. This can ensure the successful use of fully-mechanized coalfacc with top--coal caving in the lower coal seam.
文摘In order to understand the effect of mining height and floor lithology at the upper protective layer face on the pressure relief of protected coal seams, this paper uses a numerical simulation method to model the pressure changes at protected coal seam during mining upper protective layer. The results show that the taller the mining height at the upper protective layer face, the greater the protection on protected coal seam due to the higher level of pressure release; the upper protective layer face with hard rock floor impedes the pressure release at the protected coal seam, which affects the overall effect of the pressure release at protected coal seam using the protective layer mining method.
基金Project(2009AA003) supported by Science and Technology Innovation Plan of Yunnan Province, China
文摘High purity (99.999% or 5N, mass fraction) indium (In) was obtained through vacuum distillation using a 2N (99%) In as input material under a dynamic vacuum of 5 Pa. The glow discharge mass spectrometry (GDMS) was applied for the analysis of input material and the distilled indium. The results indicate that high-volatile impurities namely Cd, Zn, T1 and Pb can be removed from the indium matrix at the low fraction stage of 1 223 K for 120 min; Low-volatile impurities such as Fe, Ni, Cu, Sn can be reduced at the high fraction stage of 1 323 K for 120 min. The separation coefficient ,8i and activity coefficient Yi of impurities are calculated according to the experiments to fill the inadequate data of the thermodynamics.
基金Project 2006CB202204-3 supported by the National Basic Research Program of China
文摘Given the problem of the long time required for testing gas pressure, we propose a fast-test method in which we used a technique of fast borehole sealing and air replenishing. Based on the characteristics of gas emission from boreholes to be tested, we built a theoretical model for calculating parameters during the process of increasing natural pressure and aeration. Using this model, we investigated the effect of different aeration conditions on velocity of pressure tests. The result shows that: 1) aerating air into boreholes can speed up gas pressure tests and 2) the more similar the pressure of the aerated air to the original gas pressure, the smaller the gas volume absorbed by coal and the shorter the time needed in pressure test. A case study in the Lu’an mining area shows that the time needed for gas pressure test is only 4 h using our method of aeration and 29 h under conditions of increasing natural pressure, saving time by 86.2%. This case study also indicates that, by using the aeration method, only one hour is needed for gas pressure to reach a stable state, which breaks the record of the shortest time needed for gas pressure tests in China.
文摘Objective: To observe the clinical efficacy of auricular point pricking-bloodletting plus auricular point sticking therapy for acne vulgaris. Methods: A total of 66 patients with acne vulgaris were randomized into an observation group and a control group by the random number table, with 33 cases in each group. The observation group was treated with auricular point pricking-bloodletting plus auricular point sticking therapy, and the control group was treated only with auricular point sticking therapy. The treatments of both groups were performed twice a week, 4 weeks as a course of treatment, for 3 courses in total. The scores of skin lesions and dermatology life quality index (DLQI) scores were recorded before and after treatment to assess the clinical efficacy. Results: During the trial, there were 3 cases of drop-out both in the observation group and the control group. After 3 courses of treatment, the total effective rate of the observation group was 96.7%, while that of the control group was 76.7%. The difference between the two groups was statistically significant (P<0.05). The intra-group comparison showed that the scores of skin lesion and DLQI were both decreased with the increase of treatment times, that was, the scores were lower than those at the previous time point (allP<0.05). After 1, 2, and 3 courses of treatment, the scores of skin lesion and DLQI of both groups were statistically different from those of the same group before treatment (allP<0.05). At every time point during the treatment, the scores of skin lesion and DLQI of the observation group were lower than those of the control group, and the differences between the two groups were statistically significant (all P<0.05). Conclusion: Auricular point pricking-bloodletting plus auricular point sticking has a better curative effect than auricular point sticking therapy alone in the treatment of acne vulgaris, and has a time-effect correlation.
文摘Objective: To investigate the clinical efficacy of combining auricular and routine acupuncture for peripheral facial paralysis in acute stage. Methods: A total of 60 eligible cases were randomly allocated into a treatment group (n=30) and a control group (n=30). Cases in treatment group received auricular and routine acupuncture, whereas cases in the control group received routine acupuncture alone. Both groups were treated for 10 d. Results: The recovery rate was 73.3% in the treatment group and 53.3% in the control group, showing a statistical difference (P〈0.05). Conclusion: Combining auricular and routine acupuncture is effective for peripheral facial paralysis in acute stage and has a better effect than routine acupuncture.
基金supported by the National Natural Science Foundation of China (Grant Nos. 51177136,50377035)Zhuzhou Electric Motor Company of South China Locomotive & Rolling Stock Corporation Lim-ited
文摘Due to overvoltage produced by inverter output,inverter-fed motor insulation systems often experience fast electrical aging process,especially when partial discharge(PD) is incepted.Before putting into use,the PD detection should be performed on inverter-fed motors at repetitive square voltages to avoid the PD caused insulation deterioration when the motors are collected to inverters having specific characteristics.However,unlike PD tests at AC/DC voltages proposed in IEC 60270,the PD detection at repetitive square voltages is much more complex because of serious interference generated by impulse generator.To solve the problem,ultra-high frequency(UHF) method seems recommendable for its preferable signal-to-noise ratio(SNR).The chief aim of this study is to investigate PD pulse and statistical characteristics of turn-to-turn insulation for inverter-fed traction motors.A square-shaped Archimedes antenna,specially designed for the PD detection at repetitive square voltages of fast rise times,was used to perform PD tests on turn-to-turn insulation models.Time and frequency analysis results indicate that energy component of generator disturbance and PD pulses are mainly distributed in the 0-0.5 GHz and 0.6-1.5 GHz range,respectively.Based on the results,suitable filter was designed for power disturbance suppression.Additionally,resorting to the sensor unit(i.e.antenna and filter) and the PD test system,the PD statistical features at square voltages of different frequencies were obtained.Experimental results show that higher frequency will give rise,statistically,to PD of lower magnitudes distributing at smaller phases.A reasonable interpretation of this phenomenon was presented.Lastly,according to the PD statistical features,some suggestions for the PD detection system design,generator parameter optimization and the PD pulse extracting were given.The results of this work would be beneficial to the increase of the sensitivity when performing the PD detection on insulation systems for inverter-fed motors at repetitive square voltages and thus,improving the reliability of inverter-fed motors.