用普通机床加工凿井吊泵压水段的方法

通过对压水段主要设计精度要求的分析， 找出影响加工精度的因素， 利用普通机床加工出合格的压水段。

Pressure transient analysis of a finite-conductivity multiple fractured horizontal well in linear composite gas reservoirs

Faulted gas reservoirs are very common in reality,where some linear leaky faults divide the gas reservoir into several reservoir regions with distinct physical properties.This kind of gas reservoirs is also known as linear composite(LC)gas reservoirs.Although some analytical/semi-analytical models have been proposed to investigate pressure behaviors of producing wells in LC reservoirs based on the linear composite ideas,almost all of them focus on vertical wells and studies on multiple fractured horizontal wells are rare.After the pressure wave arrives at the leaky fault,pressure behaviors of multiple fractured horizontal wells will be affected by the leaky faults.Understanding the effect of leaky faults on pressure behaviors of multiple fractured horizontal wells is critical to the development design.Therefore,a semi-analytical model of finite-conductivity multiple fractured horizontal(FCMFH)wells in LC gas reservoirs is established based on Laplace-space superposition principle and fracture discrete method.The proposed model is validated against commercial numerical simulator.Type curves are obtained to study pressure characteristics and identify flow regimes.The effects of some parameters on type curves are discussed.The proposed model will have a profound effect on developing analytical/semi-analytical models for other complex well types in LC gas reservoirs.

Analysis and Calculation of the Flow Pressure in the Multipoint Steam Injection String of a Horizontal Well

The multipoint steam injection string of the horizontal well is a commonly used downhole component for high efficiency steam injection of the thermal recovery horizontal well. A reasonable layout of the valves to ensure an even steam output of each point is still not well designed. At present, a general design method which is urgently necessary isn＇ t applied by each factory. According to the balance relationship of the momentum, the energy and the mass of the fluid flowing in the string, the pressure distribution equation of the fluid flowing in the multipoint steam injection string is built. On the basis of this equation, the design calculation method of the multipoint steam injection string is come up with. A specific example is given in the paper. Study shows that, with the equation built in this paper, the string can be designed with each axial valve having the same output, so that the technical demand of an even steam injection of the horizontal well section can be met.

Experimental study on pressure fluctuation characteristics of slug flow in horizontal curved tubes

In order to study the pressure characteristics of slug flow in horizontal curved tubes,two kinds of curved tubes with central angle 45° and 90° respectively are studied,of which are with 0. 5m circumference and 26 mm inner diameter are used. When the superficial liquid velocity or the superficial gas velocity is constant,the pressure fluctuations and the probability distribution of the average velocity of slug flow are clear for all of the five experimental conditions. The results of experiment show that the pressure characteristics of slug flow in curved tubes have periodic fluctuations. With the rise of central angle,the period of pressure fluctuation is more obvious. The system pressure of the slug flow increases with the increasing of superficial liquid/gas velocity. Meanwhile,the probability distribution of pressure signal shows regularity,such as unimodal,bimodal or multimodal.

Application of preblasting to high-section top coal caving for steepthick coal sea

For mining extra-steep-thick coal seam, the sublevel top coal caving is a high efficient method in practical engineering. However, major challenges associated with mining high-section top-coal-caving （HSTCC） are related to the resulting high ground stresses. Inevitability, using the high-section sublevel top coal caving for extra-steep-thick coal seam, the large scale of mined-out area appears. If the prefracture blasting and hydraulic fracture techniques are utilized, the top coal damage and cracks will develop, and the mining complexity will increase, such as seam inclination, continuity, mechanical characteristics of roof and susceptibility of top coal, etc. First, the field conditions of B1＋2 seam were investigated at the ＋588 level of the Weihuliang Underground Mine of China. Subsequently, according to caving mechanism of strata response obtained from several special models including physical simulation tests and numerical simulation models, the prefracture process including blasting and injecting water were analyzed. Then, the prefracture blasting technique was successfully applied to the caving of 52 m-sublevel seam. Finally, the effects were verified by advanced detecting instruments, and the results show these methods and measurements are feasible and valid.

High-pressure phases of Weyl semimetals NbP, NbAs, TaP,and TaAs

In this study, we used the crystal structure search method and first-principles calculations to systematically explore the highpressure phase diagrams of the TaAs family （NbP, NbAs, TaP, and TaAs）. Our calculation results show that NbAs and TaAs have similar phase diagrams, the same structural phase transition sequence I41md→Pδm2→}P21/c→Pm3m, and slightly different transition pressures. The phase transition sequence of NbP and TaP differs somewhat from that of NbAs and TaAs, in which new structures emerge, such as the Cmcm structure in NbP and the Pmmn structure in TaP. Interestingly, we found that in the electronic structure of the high-pressure phase Pδm2-NbAs, there are coexisting Weyl points and triple degenerate points, similar to those found in high-pressure Pδm2-TaAs.