A high precision, high antijamming multipoint infrared telemetry system was developed to measure the piston temperature in internal combustion engine. The temperature at the measuring point is converted into correspon...A high precision, high antijamming multipoint infrared telemetry system was developed to measure the piston temperature in internal combustion engine. The temperature at the measuring point is converted into corresponding voltage signal by the thermo-couple first. Then after the V/F stage, the voltage signal is converted into the frequency signal to drive the infrared light-emitting diode to transmit infrared pulses. At the receiver end, a photosensitive audion receives the infrared pulses. After conversion, the voltage recorded by the receiver stands for the magnitude of temperature at the measuring point. Test results of the system indicate that the system is practical and the system can perform multipoint looping temperature measurements for the piston.展开更多
In the SILER （Seismic-Initiated events risk mitigation in LEad-cooled Reactors） Project, it is interesting to apply seismic isolation technology for the reactor assembly of the fixed base reactor building for ADS （...In the SILER （Seismic-Initiated events risk mitigation in LEad-cooled Reactors） Project, it is interesting to apply seismic isolation technology for the reactor assembly of the fixed base reactor building for ADS （Acceleration Driven System） heavy liquid reactor MYRRHA （Multipurpose Hybrid Research Reactor for High-Tech Application） which contains the most critical safety related components, such as reactor vessel, safe shutdown and control rod mechanisms, primary heat exchangers, primary pumps, spoliation target assembly and fuel assemblies, etc. The purpose of this paper is to investigate the possibility of an application of a partial seismic isolation to the safety critical components only, here, the reactor assembly. This paper presents the preliminary analysis results of the isolated reactor assembly and compares these with those of seismic isolated ADS reactor building. The analysis results show the reduction of the seismic acceleration response but the increase of the relative displacement for the reactor assembly. Some safety issues, especially, coolant＇s incapable covering the reactor core make difficult to apply for the partial seismic isolation of the ADS reactor assembly due to large relative displacement occurring the partial isolation system. Further study on the partial seismic isolation application of the critical safety components are also discussed.展开更多
By extracting the outlet pressure data of gas regulators,this paper uses the EMD toolbox of the MATLAB software,which can perform data decomposition and the Hilbert-Huang Transform to find the rules with fault data.Ev...By extracting the outlet pressure data of gas regulators,this paper uses the EMD toolbox of the MATLAB software,which can perform data decomposition and the Hilbert-Huang Transform to find the rules with fault data.Eventually,the medium-low pressure gas regulator fault criterion can be established.展开更多
文摘A high precision, high antijamming multipoint infrared telemetry system was developed to measure the piston temperature in internal combustion engine. The temperature at the measuring point is converted into corresponding voltage signal by the thermo-couple first. Then after the V/F stage, the voltage signal is converted into the frequency signal to drive the infrared light-emitting diode to transmit infrared pulses. At the receiver end, a photosensitive audion receives the infrared pulses. After conversion, the voltage recorded by the receiver stands for the magnitude of temperature at the measuring point. Test results of the system indicate that the system is practical and the system can perform multipoint looping temperature measurements for the piston.
文摘In the SILER （Seismic-Initiated events risk mitigation in LEad-cooled Reactors） Project, it is interesting to apply seismic isolation technology for the reactor assembly of the fixed base reactor building for ADS （Acceleration Driven System） heavy liquid reactor MYRRHA （Multipurpose Hybrid Research Reactor for High-Tech Application） which contains the most critical safety related components, such as reactor vessel, safe shutdown and control rod mechanisms, primary heat exchangers, primary pumps, spoliation target assembly and fuel assemblies, etc. The purpose of this paper is to investigate the possibility of an application of a partial seismic isolation to the safety critical components only, here, the reactor assembly. This paper presents the preliminary analysis results of the isolated reactor assembly and compares these with those of seismic isolated ADS reactor building. The analysis results show the reduction of the seismic acceleration response but the increase of the relative displacement for the reactor assembly. Some safety issues, especially, coolant＇s incapable covering the reactor core make difficult to apply for the partial seismic isolation of the ADS reactor assembly due to large relative displacement occurring the partial isolation system. Further study on the partial seismic isolation application of the critical safety components are also discussed.
基金supported by Science and technology project of Beijing in 2015 from Beijing Municipal Science&Technology Commission
文摘By extracting the outlet pressure data of gas regulators,this paper uses the EMD toolbox of the MATLAB software,which can perform data decomposition and the Hilbert-Huang Transform to find the rules with fault data.Eventually,the medium-low pressure gas regulator fault criterion can be established.
